Launch iCarScan Bedienungsanleitung
- 1 -
iCarScan
Quick Start Guide
(V1.00)
Note: This Quick Start Guide applies to the iCarScan VCI (Vehicle Communication Interface) connector
and is subject to change without prior written notice.
- 1 -
Precautions on operation
Before using this product, please read the following information carefully.
The illustrations herein are for reference only and are subject to change based on the smart mobile
terminal you are using and / or software updates.
Always perform automotive testing in a safe environment.
The instrument is a precision electronic instrument. Pay more attention when in use, NEVER have it
dashed.
Do not connect or disconnect the VCI connector while the ignition is on or the engine is running.
Do not keep the VCI connector plugged into your vehicle overnight, be sure to always remove
connector once testing and/or diagnosis is complete. Failure to do so may result in drained or
weakened battery.
Do not drive the vehicle and operate the VCI connector at the same time. Any distraction may cause
an accident.
To avoid damaging the VCI connector or generating false data, please make sure the vehicle
battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and
secure.
Keep the VCI connector dry, clean, free from oil, water or grease. Use a mild detergent on a clean
cloth to clear the outside of the connector as necessary.
Attention: The purchasing agreement for the software is for ONE year subscription.
- 2 -
1. Knowledge of iCarScan
No.
Name
Notes
1
OBD-16 connector
To connect to vehicle’s OBDII DLC.
2
Power indicator
It lights up while plugging the VCI connector into the
vehicle’s DLC.
3
Communication indicator
It will flash once the VCI connector is communicating
with the smart Android device or it is being reset.
4
Micro USB port
To connect to PC for data transmission or upgrade via
USB cable.
If it is the first time you have used the product, you have to experience the following procedure to
diagnose a vehicle.
Before proceeding the following steps, please make sure that your Android smart device has a strong
network signal.
- 3 -
2. Download & Install the iCarScan App
The iCarScan app is free to download.
1. Turn on your Android smart terminal.
2. Go into Android Play Store (Google play).
Google play can be found in the following URL: https://play.google.com/store.
3. Input the keyword "ICARSCAN" in the search bar.
4. Once found, tap on "FREE" to download and install it.
5. After the installation is complete, a iCarScan icon will be created on the HOME screen.
3. Getting Started
It is necessary to have a basic knowledge of the iCarScan App.
No.
Description
1
Function menu button: Tap on it to unfold function menu.
2
Login button: Tap on it to login or register the diagnostic system. Once users have
logged in successfully, it will change to your username.
3
Vehicle region tab: Tap on different tabs to switch to corresponding vehicles.
4
Free tag: It indicates this software is offered to you free of charge.
5
Vehicle software logo: To start diagnosing a vehicle, you have to download the
corresponding diagnostic software.
6
Downloadable icon: It indicates that the current diagnostic software has not been
downloaded or purchased yet. Once downloaded, it will disappear from the lower right
corner.
7
Reset Series software: A total of 3 reset function software is available free of charge.
- 4 -
4. Initial Use
A. User Registration & Activate Connector
1. Tap on "Login" located on the upper right corner of main menu screen, a screen similar to the
following will appear:
2. For new users, tap on "Register" to proceed to next step. For existing users, input your Username
and Password directly.
3. Input the required information, and then tap on "Register and Login", a dialog box similar to the
following will pop up.
4. Tap on "Register Connector".
5. Fill in the Serial Number and Verification Code, which can be found in the password envelope in the
package:
To register the connector later and exit, tap on "No Connector". In this case, you can also activate it
by tapping on -- > "Mine" -- > "Activate Device".
6. Tap on "Confirm" to activate your connector and return to the main menu screen.
B. Download Free Software
By default max. 5 software (excluding DEMO, EOBD and 3 Reset series software) can be selected for
free download.
To purchase other software, you need to pay extra fees. For details on purchasing diagnostic software,
- 5 -
please refer to "5. Purchase & Download Diagnostic Software".
Attention: The purchasing agreement for the software is for ONE year subscription.
Once it expires, only the older version becomes available and in this case you may renew your subscription to
enjoy the latest version and more functions.
1. Tap on certain car model logo, a window listing all available vehicle software will appear.
2. Check the box to select the desired vehicle software, and tap on to confirm.
3. Tap on to start downloading. Once downloading is complete, tap to return to the main menu
screen.
- 6 -
5. Purchase & Download Diagnostic Software
A. Purchase Diagnostic Software
The icon located on the lower right corner of the diagnostic software logo means that the diagnostic
software has not been purchased and downloaded.
1. Tap on the desired vehicle make logo to enter software information interface. Here we take GM as
an example.
2. Tap on "Purchase Now" to go into order confirmation page.
3. Double check if your order information is correct and then tap on to enter the payment method
page.
4. Select one of payment types, then follow the on-screen instructions to complete the transaction.
B. Download Diagnostic Software
Only after payment has been made successful for diagnostic software or software package can the
software or software package be downloaded.
1. Tap on GM logo, a screen similar to the following appears:
- 7 -
2. Tap on "Download Software". Tap on to start downloading.
3. Tap on to start downloading.
4. Once downloading finishes, tap on to return to the main menu interface and the icon of the
GM logo disappears.
6. Vehicle Connection
1. Turn the ignition switch off;
2. Locate the vehicle’s DLC socket: It is usually located 12 inches from the center of the instrument
panel, under or around the driver’s side for most vehicles. If it is not located under dashboard, a
label should be there telling location. For some Asian and European vehicles, the DLC is located
behind the ashtray and the ashtray must be removed to access the connector.
3. Plug the VCI connector into DLC socket;
4. Turn the key to the ON position, and then the power indicator of the connector will light up.
Now you can start diagnosing.
Note: Remember to remove the connector once testing and/or diagnosis is complete.
- 8 -
7. Start to Diagnose
- 9 -
Inhaltsverzeichnis
Andere Launch Diagnosegeräte Handbücher
Launch
Launch Creader Professional CRP129E Bedienungsanleitung
Launch
Launch X-431 PROS V4.0 Bedienungsanleitung
Launch
Launch X-431 PRO3S+ Bedienungsanleitung
Launch
Launch Creader Professional 129E Bedienungsanleitung
Launch
Launch CR5001 Bedienungsanleitung
Launch
Launch X431 V Bedienungsanleitung
Launch
Launch CNC-602A Bedienungsanleitung
Launch
Launch X-431 Turbo III Bedienungsanleitung
Launch
Launch CRP229 Bedienungsanleitung
Launch
Launch X-431 Torque HD Bedienungsanleitung
Launch
Launch X-431 PADII Bedienungsanleitung
Launch
Launch X-431 PAD V Bedienungsanleitung
Launch
Launch TS971 Bedienungsanleitung
Launch
Launch X-431 PROS MINI 3.0 Bedienungsanleitung
Launch
Launch X431 V 11 Bedienungsanleitung
Launch
Launch X431 V Bedienungsanleitung
Launch
Launch X-431 GDS Bedienungsanleitung
Launch
Launch Creader Professional 909 Bedienungsanleitung
Launch
Launch X-431 PAD V ELITE Bedienungsanleitung
Launch
Launch Creader Professional 123 Series Bedienungsanleitung
