LEGRAND LUXUL Bedienungsanleitung

Access Point Setup Guide

Setting up your AP:

Place the AP in the center

of the desired coverage area

NOTE: If installing this AP with a

wireless controller, refer to the Wireless Controller Setup Guide

Connect a PoE+ Ethernet cable to the AP’s PoE

port (for power, use the included PoE injector

or a compatible PoE+ switch)

AP power

source

router or

switch

OUT

POE

INJECTOR

Connecting Via an Ethernet Device

Use an Ethernet cable to connect your computer to the LAN port

of the AP. Ethernet is the preferred method of connection

Connecting Via a Wireless Device

Connect a wireless client device to the AP’s default wireless

SSID LuxulXXXX* and use the passphrase: luxulwiﬁ

*XXXX corresponds to the model number of the AP

NOTE: If your computer or device isn’t set to obtain an IP address

automatically, you’ll need to set a temporary static IP address

on that device. Set the IP address of your computer to an

address in the 192.168.0.X range and set your subnet mask to

255.255.255.0. You can leave the default gateway/router ip

address blank.

3a.

3b.

Open a web browser and go to 192.168.0.10

User Name: admin

Password: admin

SECURITY NOTE: You will be required to

change the default administrator password.

View Luxul’s Privacy policy at:

https://www.legrandav.com/legal/privacy_policy

The marking information is located at the bottom of the apparatus

No part of this document may be modiﬁed or adapted in any way, for any purposes without permission in

writing from Luxul. The material in this document is subject to change without notice. Luxul reserves the

right to make changes to any product to improve reliability, function, or design. No license is granted,

either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied

license only exists for equipment, circuits and subsystems contained in this or any Luxul product.

mark and Simply Connected are all trademarks and or registered trademarks of Legrand AV Inc.

All other trademarks and registered trademarks are property of their respective holders.

Technical Support

P: 801-822-5450

E: [email protected]

Support chat: LegrandAV.com click ‘Live Chat’

(upper right) and select Luxul under ‘Brand’

Sales

P: 801-822-5450

E: [email protected]

I need to restore factory default settings?

To restore factory default settings to your AP, press and

hold the button labeled ‘RESET’ until the green system LED

starts ﬂashing (5 seconds)

I need to restart my AP?

To restart your AP, press and quickly release the button

labeled ‘RESET’

I want to perform advanced conﬁguration?

1. Open a web browser and go to 192.168.0.10 or the IP

address you speciﬁed during the setup process

2. Enter the login credentials you created during the

setup process

What if... What do the LEDs on my AP indicate?

Indicator State Description

Green

System

LED

On AP is properly connected to power supply

Blinking AP is booting

O Power disconnected or AP is o, or LEDs

are turned o in the web interface

Blue

LEDs

The blue LEDs indicate the status of the wireless broadcast; one for

2.4GHz and the other for 5GHz

On AP is broadcasting a wireless signal

Blinking Indicates wireless activity

O AP is not broadcasting a signal, or the

LEDs are turned o in the web interface

Andere LEGRAND Drahtloser Zugangspunkt Handbücher

LEGRAND

LEGRAND DA2131-V1 Bedienungsanleitung

LEGRAND

LEGRAND Intuity WiFi to RFLC Bridge Bedienungsanleitung

LEGRAND

LEGRAND Luxul Apex XAP-1610 Bedienungsanleitung

LEGRAND

LEGRAND LUXUL AP-3064 Bedienungsanleitung

LEGRAND

LEGRAND HA7040 Bedienungsanleitung

LEGRAND

LEGRAND DA2131-V1 Bedienungsanleitung

LEGRAND

LEGRAND DA2131-V1 Bedienungsanleitung

LEGRAND

LEGRAND 0 503 97 Bedienungsanleitung

LEGRAND

LEGRAND N-WAP Bedienungsanleitung

LEGRAND

LEGRAND 0 336 10 Bedienungsanleitung

LEGRAND

LEGRAND Wireless access point Merkblatt

LEGRAND

LEGRAND DA1104 Bedienungsanleitung

LEGRAND

LEGRAND 802.11a Bedienungsanleitung

LEGRAND

LEGRAND Celiane 673 64 Bedienungsanleitung

LEGRAND

LEGRAND DA2131-V1A Bedienungsanleitung

LEGRAND

LEGRAND DA1101 Bedienungsanleitung

LEGRAND

LEGRAND DA1101 Bedienungsanleitung

LEGRAND

LEGRAND 779 11 Bedienungsanleitung

LEGRAND

LEGRAND 779 11 Bedienungsanleitung

LEGRAND

LEGRAND Dual band Access Point Bedienungsanleitung

LEGRAND

LEGRAND 033523 Bedienungsanleitung

LEGRAND

LEGRAND DA2155 Bedienungsanleitung

LEGRAND

LEGRAND LUXUL Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung