Leica Geosystems ScanStation P16 Benutzerhandbuch
Leica
ScanStation P16
System Field Manual
Version 4.0
English
2
ScanStation P16, Introduction
Introduction
To use the product in a permitted manner, please refer to the detailed safety direc-
tions in the User Manual.
Purchase Congratulations on the purchase of a Leica ScanStation P16 instrument.
Product
identification
The type and serial number of your product are indicated on the type plate. Always
refer to this information when you need to contact your agency or Leica Geosystems
authorised service workshop.
Symbols The symbols used in this manual have the following meanings:
Trademarks • Windows is a registered trademark of Microsoft Corporation
All other trademarks are the property of their respective owners.
Validity of this
manual
This manual applies to the Leica ScanStation P16 instruments.
Type Description
Important paragraphs which must be adhered to in practice as
they enable the product to be used in a technically correct and
efficient manner.
ScanStation P16, Introduction 3
Available docu-
mentation Name Description/Format
Leica
ScanStation P16
Quick Guide
Provides an overview of the product together
with technical data and safety directions.
Intended as a quick reference guide.
Leica
ScanStation P16 User
Manual
All instructions required in order to operate the
product to a basic level are contained in the
User Manual. Provides an overview of the
product together with technical data and safety
directions.
-
Leica
ScanStation P16
System Field Manual
Describes the general operation of the product
in standard use. Intended as a quick reference
field guide.
-
Leica Geosystems
HDS Training Manual
Training manual provided in the Leica HDS
training course by the local Leica HDS training
and support team.
4
ScanStation P16, Introduction
Refer to the following resources for all Leica ScanStation P16 documentation
and software
• Leica ScanStation P16 System USB Swing Card
• http://www.leica-geosystems.com/downloads
• http://www.leica-geosystems.com/en/HDS-Laser-Scanners-SW_5570.htm
• https://myworld.leica-geosystems.com
ScanStation P16, Table of Contents 5
Table of Contents
In this manual Chapter Page
1 Description of the System 8
1.1 Packing / Unpacking 8
2 Setting Up the Instrument 10
2.1 General Information 10
2.2 Scanner Setup on Tripod 11
2.3 Setup Over a Benchmark with the Internal Laser Plummet 13
3 Description of the User Interface 16
3.1 Front Side 16
3.2 Display 17
3.3 Status Bar 19
3.4 Operating Principles 25
4 Switching the System On/Off 28
5 Remote Control 30
6 Main Menu 34
6
ScanStation P16, Table of Contents
7Scanning 36
7.1 Parameter\Scan Parameters 37
7.1.1 Parameter\Scan Parameters\Field of View 39
7.1.2 Parameter\Scan Parameters\Resolution 49
7.1.3 Parameter\Scan Parameters\Image Control\Internal Camera 52
7.1.4 Parameter\Scan Parameters\Image Control\External Camera 59
7.1.5 Parameter\Scan Parameters\Filters 69
7.1.6 Parameter\Scan Parameters\Detail Scan 71
8 Projects 74
8.1 Projects\New Project 76
8.2 Projects\Edit Project 78
8.3 Projects\Delete Project 80
8.4 Projects\Data 82
8.5 Projects\Transfer Project 87
9 Status 88
9.1 Status\Battery & Memory 91
9.2 Status\System Information 95
9.3 Status\Level & Laser Plummet 101
9.4 Status\WiFi 108
ScanStation P16, Table of Contents 7
10 Configuration 112
10.1 Configuration\Units & Formats 114
10.2 Configuration\Date & Time 116
10.3 Configuration\Settings 118
10.4 Configuration\Language 120
11 Tools 122
11.1 Tools\Format 124
11.2 Tools\Transfer 126
11.3 Tools\License 135
11.4 Tools\Screen Calibration 139
8
ScanStation P16, Description of the System
1 Description of the System
1.1 Packing / Unpacking
Packing and
unpacking
When in its transport container, the ScanStation P16 can sit in either a face-up or
face-down position.
Pack the instrument the same way it is delivered.
To take the instrument out of its container,
grasp the handle and the base of the instru-
ment, and lift.
Use caution due to the weight of the instru-
ment (12 kg).
004236_001
ScanStation P16, Description of the System 9
10
ScanStation P16, Setting Up the Instrument
2 Setting Up the Instrument
2.1 General Information
Use the tripod The instrument should always be set up on its tripod. Using the tripod specified for
the scanning system guarantees maximum stability during scanning operations.
Always set up the instrument on its tripod. Do not set up the instrument directly on
the ground for scanning operations.
It is always recommended to shield the instrument from direct sunlight and avoid
uneven temperatures around the instrument.
Inhaltsverzeichnis
Andere Leica Geosystems Scanner Handbücher
Leica Geosystems
Leica Geosystems Scan Station P16 Handbuch
Leica Geosystems
Leica Geosystems ScanStation P40 Bedienungsanleitung
Leica Geosystems
Leica Geosystems BLK360 Anleitung zur Verwendung
Leica Geosystems
Leica Geosystems T-Scan Bedienungsanleitung
Leica Geosystems
Leica Geosystems BLC ARC Bedienungsanleitung
Leica Geosystems
Leica Geosystems ScanStation C10 Bedienungsanleitung
Leica Geosystems
Leica Geosystems 3D Disto Bedienungsanleitung
