Leviton 6F101 Bedienungsanleitung

Mini MeterTM

Installation Manual

Cat No. 6F101, 6F201, 6S101, 6S201, MK240, MO240

DI-000-A3245-00A

WEB VERSION

TABLE OF CONTENTS

1 Warnings and Cautions

2 Product Description

2.1 General Description

2.2 Meter Features

2.3 Meter Certiﬁcations

2.4 Physical Description

2.4.1 Single Meter

2.4.2 Enclosures

3 Technical Speciﬁcations

3.1 Electrical Speciﬁcations

3.2 Input/Output Connections

4 Installation Instructions

4.1 Preparation

4.2 List of Materials

4.3 Mounting the Enclosure

4.3.1 Mounting Location

4.3.2 Drilling Conduit Holes

4.3.3 Mounting Procedure and Conduit Installation

4.4 Installation of Voltage Lines

4.5 Installation of Current Transformers

4.5.1 General Requirements

4.5.2 Installing Solid Core CTS

4.6 Testing the Installation

5 Maintenance

6 Troubleshooting

7 Warranty

8 Contact Information

WEB VERSION

1 WARNINGS AND CAUTIONS

The following section contains installation and wiring instructions for the Leviton Mini Meter™.

If technical assistance is required at any point during the installation, contact information can

be found at the end of this manual. Leviton is not responsible for damage to the meter caused

by incorrect wiring, which will void the product’s warranty.

WARNING:

• TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER at circuit breaker or fuse

and test that the power is off before installing product or servicing current transformers.

• TO AVOID FIRE, SHOCK OR DEATH; Look inside the meter and electrical panel for

possible exposed wire, broken wire, damaged components or loose connections.

• Make sure all tools used during installation have proper installation ratings.

• Installations should be done in accordance with local codes and current National

Electric Code requirements, and performed by trained, qualiﬁed professionals.

• Equipment used in a manner not speciﬁed by this document impairs the protection

provided by the equipment.

CAUTIONS:

• Verify the model number and electrical speciﬁcations of the device being installed to

conﬁrm they are appropriate for the intended electrical service

(see Section 3).

• Consult local codes for any possible permits or inspections required before beginning

electrical work.

• Ensure the conduit for the installation is ﬂexible and non-metallic. For outdoor

applications conduit and conduit ﬁttings must be rated UL Type 4X for outdoor

enclosures. Failure to use the appropriate conduit impairs the degree of equipment

protection.

WEB VERSION

2 PRODUCT DESCRIPTION

2.1 General Description

The Leviton Mini Meter is a self-powered, current transformer (CT) rated electronic

kilowatthour (kWh) meter designed for permanent connection to an electrical service.

Mini Meter devices come in single element (2-wire) and dual element (3-wire)

conﬁgurations.

2.2 Meter Features

• Revenue-grade accuracy with solid-core or easy to install split core CTs

• Built in LCD display with optional external mechanical counter

• Encapsulated model for harsh environments

• Multiple load monitoring with a single meter

• AMR compatible isolated pulse outputs

• 5-year warranty

2.3 Meter Certiﬁcations

• UL Approved (100A & 200A models only) for use in the US or Canada

• Conforms to accuracy requirements set forth in ANSI C12.1 and C12.16

• Certiﬁed to California Division of Measurement Standards

• Approved by the California Energy Commission for use in the California Solar

Initiative’s Performance Based Incentive Program

• Approved by State of Maryland Public Service Commission in accordance with

applicable ANSI C12.1 requirements

2.4 Physical Description

2.4.1 Single Meter

X1 X2

CT1 CT2 (Kh) Isol

Isolated Output

X1 X2 10 100 1000

Counter

+12VDC

12COM

L2N

4.620 in.

2.845 in.2.150 in.

3.525 in.

5.130 in.

1.107 in. 1.282 in.

.125 in.

Figure 1 - Single Mini Meter Case Dimensions

WEB VERSION

2 PRODUCT DESCRIPTION

2.4 Physical Description

2.4.2 Enclosures

Figure 2 - Small enclosure and mounting dimensions

Optional mounting position, typical

5.904 in [150 mm]

8.465 in [215 mm]

7.795 in [198 mm]

4.716 in [120 mm] 5.904 in [150 mm]

5.716 in [145 mm]

3.568 in

[91 mm]

WEB VERSION

Input Conﬁgurations 1 Phase, 2 wire

1 or 2 Phase, 3 wire

Supply Voltage Range

(L1 or L2 to Neutral)

Min. 102 VAC Max. 138 VAC

Maximum Input Power 8 VA

Maximum Rated Current1220 A primary for 200 A models

110 A primary for 100 A models

0.11 A secondary for 0.1 A secondary models

0.22 A secondary for 0.2 A secondary models

Line Frequency 50-60 Hz

Power Factor Range 0.5 to 1.0, leading or lagging

Accuracy +/- 0.5% of registration @ 1.0pf. 2 to 200 A

+/- 0.75% of registration @ 0.5pf, 2 to 200 A

Operating Temperature Range -30 to +70 degrees C

Rated Pollution Degree22

Rated Relative Humidity 80%

Branch Fuse Holder

Klemsan ASK2 or equiv.

250 V, 1 A, fast acting, short time lag

Terminal Blocks Mini Meter

Dinkle/International Connector

OSTVI110152

4.4 in-lb of torque maximum

3 TECHNICAL SPECIFICATIONS

Table 1 - Electrical and Environmental Speciﬁcations

1Product approved for use with included Leviton Current Transformers, as follows:

• 200A:

Part Numbers CDA02-x12 (CDA02-K12, CDA02-R12, CDA02-L12, CDA02-212,

CDA02-312) for Solid Core, 0.72" Diameter CTs or CTD02-K16 for Split Core 1" CTs

• 100A:

Part Numbers CDA01-x12 (CDA01-K12, CDA01-R12, CDA01-L12, CDA01-212,

CDA01-312) for Solid Core, 0.72" Diameter CTs or CTD01-K16 for Split Core 1" CTs

2Pollution Degree 2: normally only non-conductive pollution occurs. Occasionally, however, a

temporary conductivity caused by condensation can happen.

3.1 Electrical and Environmental Speciﬁcations

The Mini Meter device falls under UL Circuit Category III: devices for measurements

performed in the building installation. The electrical and environmental speciﬁcations

for Mini Meter devices are given in the table below.

WEB VERSION

3 TECHNICAL SPECIFICATIONS

3.2 Input/Output Connections and User Display

Voltage Inputs (wire connections) Description

L1 Black wire, voltage input, Line 1,

120 V with respect to neutral

N White wire, Neutral input

L2 Red wire, voltage input, Line 2, 120 V with

respect to neutral (2 phase models only)

CT Inputs

CT1 : X1 Current Transformer input, CT1.

Colored wire of CT 1

CT1 : X2 Current Transformer input, CT1. White wire

of CT1

CT2 : X1 Current Transformer input, CT2.

Colored wire of CT 2.

(2 phase models only)

CT2 : X2 Current Transformer input, CT2. White wire

of CT2 (2 phase models only)

X1 X2

CT1 CT2 (Kh) Isol

Isolated Output

X1 X2 10 100 1000

Counter

+12VDC

12COM

L2N

Figure 3 - Mini Meter Connections and Display

Table 2A - Input Connections

LCD

Display

Load

LED

Sealing

Studs

WEB VERSION

3 TECHNICAL SPECIFICATIONS

Table 3 - Display Indicators

Table 2B - I/O Connections

3.2 Input/Output Connections and User Display

Outputs Description

10, Isolated Output (10 Wh/P, Kh = 10) Isolated pulse output: 5 watthours

on, 5 watthours off, referenced to

ISOL COM NOT TO BE USED FOR

FIELD WIRING

100, Isolated Output (100 Wh/P, Kh=100) Isolated pulse output: 50 watthours

on, 50 watthours off, referenced to

ISOL COM

1000, Isolated Output (1 kWh/P, Kh=1000) Isolated pulse output: 500 watthours

on, 500 watthours off, referenced to

ISOL COM

ISOL COM Isolated common for 10/100/1000

isolated outputs

Counter (kh = 100 or kh = 1000)* For 12 VDC electro-mechanical

counter

+12 VDC +12 VDC @ 10ma Max output

(MMS and MMD models only) (Not Isolated for pre-wiring only)

* Recommended Leviton Mechanical Counters part numbers are:

MPCTR-1KW (1kWh) and MPCTR-TKW (0.1kWh).

LED Indicators Description

Load LED (green) 50% duty cycle LED to verify proper

meter function when connected to a

load. At 200 watts, LED will ﬂash 1.5

minutes on, 1.5 minutes off; with no

load, LED will remain on or off

LCD Display LCD display that shows total kWh

(also displays kw demand,

instantaneous kw, error codes if

applicable, and more information

upon boot. Refer to the Mini Meter

manual for complete information)

WEB VERSION

4 INSTALLATION INSTRUCTIONS

4.1 Preparation

WARNINGS

•TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER at circuit breaker

or fuse and test that power is off before installing product or servicing current

transformers.

•TO AVOID FIRE, SHOCK OR DEATH; Look inside the meter and electrical

panel for possible exposed wire, broken wire, damaged components or loose

connections.

•Speciﬁcation for branch circuit protection, rated min. 250 V, 1A, for voltage

sense / input leads.

4.2 List of Materials

• Mini Meter MMU and associated mounting materials.

• Line 1, Line 2, and Neutral hook-up wires as needed for the electrical service.

Wires must be 18 AWG or larger and insulated for 300 VAC min

(NOT INCLUDED).

• Current Transformers (CTs): This product is designed for use with Leviton CTs;

see Section 3.2 for details (NOT INCLUDED IN ALL MODELS).

• Flexible, non-metallic conduit and ﬁttings; UL Type 4X for outdoor applications

(NOT INCLUDED).

4.3 Mounting the Enclosure

4.3.1 Mounting Location

• Meter installations require a switch or circuit breaker as part of the building

installation.

•The switch or circuit breaker must be marked as the disconnecting device for

the MMU.

• It is recommended that the enclosure be mounted near the disconnecting

device in an area with adequate ventilation.

•The enclosure should not be positioned in a manner that makes it difﬁcult to

operate the disconnecting device.

• Ensure that the CT and voltage lead lengths (and conduit lengths) are capable

of reaching the enclosure from the breaker panel.

• If a suitable mounting location near the load center cannot be found, additional

in-line fuses or circuit breaker may be required in accordance with NEC

regulations.

WEB VERSION

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Leviton Messgerät Handbücher

Leviton

Leviton 3300 series Bedienungsanleitung

Leviton

Leviton PK-A3218-10-00-0D Bedienungsanleitung

Leviton

Leviton VerifEye 7000 Series Bedienungsanleitung

Leviton

Leviton VerifEye 6000 Series Bedienungsanleitung

Leviton

Leviton VerifEye 72D48 Bedienungsanleitung

Leviton

Leviton Series 1000 Bedienungsanleitung

Leviton

Leviton VerifEye 71D48 Bedienungsanleitung

Leviton

Leviton 70D03 Bedienungsanleitung

Leviton

Leviton 6M Series Technische Daten

Leviton

Leviton Verifeye 8000 Series Bedienungsanleitung

Leviton

Leviton 3300 series Bedienungsanleitung

Leviton

Leviton 4000-R series Bedienungsanleitung

Leviton

Leviton VerifEye Series 4100 Bedienungsanleitung

Leviton

Leviton LP8 Series Bedienungsanleitung

Leviton

Leviton Series 1000 Bedienungsanleitung

Leviton

Leviton 4000 Series Bedienungsanleitung

Leviton

Leviton mini meter MMU Bedienungsanleitung

Leviton

Leviton VerifEye MDTFW Bedienungsanleitung

Leviton

Leviton Verifeye 8000 Series Bedienungsanleitung

Leviton

Leviton 4000-R series Bedienungsanleitung

Leviton

Leviton VerifEye 3300 Series Bedienungsanleitung

Leviton

Leviton VerifEye Series 4100 Bedienungs- und Wartungsanleitung

Leviton

Leviton VerifEye S8112 Bedienungsanleitung

Leviton

Leviton Series 2000 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung