Levoit Viera Bedienungsanleitung
Questions or Concerns?
Please contact us Mon - Fri 9:00AM - 5:00PM PST
at (888) 726 - 8520 or email support@levoit.com
Natural Himalayan Salt Lamp
Model: Viéra
Questions or Concerns?
Please contact us Mon - Fri 9:00AM - 5:00PM PST
at (888) 726 - 8520 or email [email protected]
Natural Himalayan Salt Lamp
Model: Viéra
2
3
Thank you for purchasing the Viéra Natural Himalayan Salt Lamp by Levoit. We are dedicated
to providing you with quality products so that you can see a better you. Should you have any
questions or concerns about using your new product, feel free to reach out to our helpful
enjoy your new product!
Thank You.
4
Table of Contents
Safety Information
Main Functions
Set-Up
Operation
Cleaning & Maintenance
Specifications
Customer Support
Warranty Information
5
6
7
7
8
9
10
11
5
Safety Information
IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before
using the device. Failure to comply with the instructions given in this manual and/or using the device in ways
other than the ones mentioned in this manual, may result in serious injury and/or damage the product.
• Keep out of reach of children.
• Avoid exposure to high-temperature sources, direct sunlight, and humid environments. The lamp is for indoor
use only.
• DO NOT strike or drop the lamp. The glass lamp housing may shatter and cause injury.
• To avoid damage, move and handle with care.
• DO NOT wash with water or detergents. Do not immerse in any form of liquid.
• DO NOT place the salt lamp near any electrical appliances. The natural evaporation may humidify or damage
other appliances.
• Due to the nature of salt, each crystal varies in color, shape, size, and weight.
• If the salt crystals become moist, set the lamp to its highest setting to allow the salt crystals to dry.
• DO NOT replace the bulb while the lamp is connected to a power source.
• Although the salt crystals are non-toxic, they are not made for consumption and may present a choking hazard.
• DO NOT pour salt crystals directly in or out of the housing. Doing so may damage or even break the salt
crystals as well as scratch or crack the glass housing.
ATTENTION: If you receive a glass housing that is broken or defective, please contact our
helpful customer support team immediately (see page 10). We will be more than happy to
send you a replacement.
6
Main Functions
Function Diagram
1
5
4
6
10
9
2
3
7
8
1. Salt Crystals
2. Lamp Housing
3. Base
4. Bulb
5. Bulb Housing
6. Bulb Socket
7. Lighting Control
8. Power Cord
9. Lamp Housing Pad
10. Anti-Skid Padding
7
Set-up
1. Place salt lamp housing and base on a flat,
level surface.
2. Remove silicone caps from the base.
3. Remove salt crystals from their packaging and
carefully place them inside the housing,
ensuring that the crystals are evenly
distributed around the bulb housing.
4. Plug the salt lamp into an electrical outlet.
1. Turn o the salt lamp and unplug it from its
power source.
2. Carefully remove the salt crystals to reveal the
bulb housing. Place the salt crystals in a safe,
dry place.
3. Gently twist the top of the bulb housing while
pulling it up to uncover the bulb.
4. Remove the bulb from its socket by gently
turning it counterclockwise.
5. Install a new C7 15W bulb, and replace the
bulb housing.
6. Carefully replace all of the salt crystals back
into the housing, ensuring the crystals are
evenly distributed.
Light Bulb Replacement
NOTE: The lamp will remember the last mode and
brightness level when turned on and o, only if the
lamp is still plugged into a wall socket.
NOTE: DO NOT pour salt crystals directly into or out
of the glass housing. Doing so may damage or even
break the housing.
Operation
Function Operation
Power On Tap the lighting control button once.
Brightness
Control
Press and hold the lighting control
button and release at the desired
brightness.
Power O Tap the lighting control button once
while the salt lamp is on.
8
• Regularly dust o the salt crystals with a dry
clean cloth.
• DO NOT wash or clean salt crystals with water
or liquid detergents.
• If not in use for a long period of time, store the
lamp in a cool and dry environment, covering
the crystals with a plastic bag.
• The lamp may naturally moisten in humid
environments. If used in a humid environment,
keep the lamp lit for several hours for the
crystals to naturally dry out.
• If the salt crystals become moist, gently pat
them down with a dry cleaning cloth.
General Maintenance
1. Unplug the lamp and remove all of the salt
crystals.
2. On a clean, flat surface, lay the lamp on its side
and remove the four screws at the bottom of
the base. Carefully slide out the glass housing
and bulb socket from the base.
Replacing/Cleaning the Glass
Housing
Cleaning &
Maintenance
3. Wipe down the housing using a clean dry
cloth.
4. Replace lamp housing and bulb socket on
the base; secure the lamp housing using
the included screws. Carefully place the salt
crystals back into the housing.
9
Specifications
Voltage AC 120V / 60Hz
Rated Power 15W
Weight 9.9 lb (4.5 kg)
Size 6.5 x 6.5 x 12.2 in. (165 x 165 x 310 mm)
Power Cord Length 79 in. (2 m)
Package Contents
1 x Natural Himalayan Salt Lamp
3 x C7 15W Bulb (one pre-installed)
1 x User Manual
10
Customer Support
Should you encounter any issues or have any questions regarding your new product, feel
free to contact our helpful Customer Support Team. Your satisfaction is our goal!
Levoit Corporation
1202 N Miller Street, Suite A
Anaheim, CA 92806
Toll-Free: 888.726.8520
Email: [email protected]
Support Hours
Monday - Friday: 9:00am - 5:00pm PST
*Please have your order number ready before contacting customer support.
Inhaltsverzeichnis
Andere Levoit Medizinische Geräte Handbücher
Beliebte Medizinische Geräte Handbücher anderer Marken
TekTone
TekTone Tek-CARE160 Bedienungsanleitung
NeuroMetrix
NeuroMetrix Quell 2.0 Bedienungsanleitung
AMT
AMT XLR8 Bedienungsanleitung
Medipost-Nutristoma
Medipost-Nutristoma MD300K2 Bedienungsanleitung
EDAN
EDAN SONOTRAX Pro Bedienungsanleitung
Restorative Therapies
Restorative Therapies RT300 Bedienungsanleitung
