LG THERMA V AHUW126A3 Bedienungsanleitung

www.lg.com

Please read this manual carefully before operating

your set and retain it for future reference.

OWNER’S MANUAL

AIR-TO-WATER

HEAT PUMP

P/NO : MFL68680907

Original instruction

ENGLISH TÜRKÇE

2Air-to-Water Heat Pump

Air-to-Water Heat Pump Owner’s Manual

TABLE OF CONTENTS

FOR YOUR RECORDS

Write the model and serial numbers here:

Model #

Serial #

You can find them on a label on the side of each

unit.

Installer's Name

Purchased Date

Staple your receipt to this page in the event you

need it to prove date of purchase or for warranty

issues.

READ THIS MANUAL

Inside you will find many helpful hints on how to use and

maintain your AWHP properly. Just a little preventive

care on your part can save you a great deal of time and

money over the life of your product.

You'll find many answers to common problems in the

chart of troubleshooting tips. If you review our chart of

Troubleshooting Tips first, you may not need to call for

service at all.

PRECAUTION

•Contact the authorized service technician for repair or

maintenance of this unit.

• Contact the installer for installation of this unit.

• AWHP is not intended for use by young children or

invalids without supervision.

• Young children should be supervised to ensure that

they do not play with AWHP.

• When the power cable is to be replaced, replacement

work shall be performed by authorized personnel only

using only genuine replacement parts.

• Installation work must be performed in accordance

with the National Electric Code by qualified and

authorized personnel only.

Safety Precautions .............................3

Product Introduction ..........................8

Operation Setting..............................10

Temperature Setting.........................12

Low Noise mode ...............................15

Lock Setting ......................................17

Date setting .......................................19

Timer Setting.....................................20

Schedule Setting...............................25

Using Thermostat .............................27

Maintenance and Service.................30

Safety Precautions

Owner’s Manual 3

ENGLISH

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed.

nIncorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by

the following indications.

WARNING

CAUTION

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

WARNING

• Always ground the product.

- There is a risk of electric shock.

• Do not use a defective or underrated circuit breaker. Use the correctly rated

breaker and fuse.

- There is risk of fire or electric shock.

• Do not use a multi outlet. Always use this appliance on a dedicated circuit

and breaker.

- There is risk of fire or electric shock.

• For electrical work, contact the dealer, seller, a qualified electrician, or an

Authorized Service Center. Do not disassemble or repair the product by

yourself.

- There is risk of fire or electric shock.

• Always ground the product as per the wiring diagram. Do not connect the

ground wire to gas or water pipes lightening rod or telephone ground wire.

- There is risk of fire or electric shock.

• Install the panel and the cover of control box securely.

- There is risk of fire or electric shock due to dust, water etc.

• Use the correctly rated breaker or fuse.

- There is risk of fire or electric shock.

• Do not modify or extend the power cable. If the power cable or cord has

scratches or skin peeled off or deteriorated then it must be replaced.

- There is risk of fire or electric shock.

• For installation, removal or reinstall , always contact the dealer or an

Authorized Service Center.

- There is risk of fire, electric shock, explosion, or injury.

4Air-to-Water Heat Pump

Safety Precautions

• Do not install the product on a defective installation stand. Be sure that the

installation area does not deteriorate with age.

- It may cause product to fall.

• Never install the unit on a moving base or a place from where it can fall

down.

- The falling unit can cause damage or injury or even death of a person.

• When the product is soaked (flooded or submerged) in water, contact an

Authorized Service Center for repair before using it again.

- There is risk of fire or electric shock.

• Be sure to check the refrigerant to be used. Please read the label on the

product.

- Incorrect refrigerant can prevent the normal operation of the unit.

• Don't use a power cord, a plug or a loose socket which is damaged.

- Otherwise it may cause a fire or electrical shock.

• Do not touch , operate, or repair the product with wet hands.

- There is risk of electric shock or fire.

• Do not place a heater or other heating appliances near the power cable.

- There is risk of fire and electric shock.

• Do not allow water to run into electric parts. Install the unit away from water

sources.

- There is risk of fire, failure of the product, or electric shock.

• Do not store or use or even allow flammable gas or combustibles near the

product.

- There is risk of fire.

• Wiring connections must be secured tightly and the cable should be routed

properly so that there is no force pulling the cable from the connection termi-

nals.

- Improper or loose connections can cause heat generation or fire.

• Safely dispose off the packing materials. Like screws, nails, batteries, bro-

ken things etc after installation or service and then tear away and throw

away the plastic packaging bags.

- Children may play with them and cause injury.

• Make sure to check that the power device is not dirty, loose or broken and

then turn on the power.

- Dirty, loose or broken power device can cause electric shock or fire.

• In unit the step-up capacitor supplies high voltage electricity to the electrical

components. Be sure to discharge the capacitor completely before conduct-

ing the repair work.

- An charged capacitor can cause electrical shock.

Safety Precautions

Owner’s Manual 5

ENGLISH

• When installing the unit, use the installation kit provided with the product.

- Otherwise the unit may fall and cause severe injury.

• Be sure to use only those parts which are listed in the service parts list.

Never attempt to modify the equipment.

- The use of inappropriate parts can cause an electrical shock, excessive

heat generation or fire.

• Do not use the product in a tightly closed space for a long time. Perform

ventilation regularly.

- Oxygen deficiency could occur and hence harm your health.

• Do not open the front cover or grille of the product during operation.

(Do not touch the electrostatic filter, if the unit is so equipped.)

- There is risk of physical injury, electric shock, or product failure.

• If strange sounds, smell or smoke comes from product, immediately turn the

breaker off or disconnect the power supply cable.

- There is risk of electric shock or fire.

• Ventilate the product room from time to time when operating it together with

a stove, or heating element etc.

- Oxygen deficiency can occur and hence harm your health.

• Turn the main power off when cleaning or repairing the product.

- There is risk of electric shock.

• Take care to ensure that nobody especially kids could step on or fall onto

the unit.

- This could result in personal injury and product damage.

• Take care to ensure that power cable could not be pulled out or damaged

during operation.

- Almost the antifreeze is a toxic product.

• Do not touch any electric part with wet hands. you should be cut power

before touching electric part.

- There is risk of electric shock or fire.

• Do not touch refrigerant pipe and water pipe or any internal parts while the

unit is operating or immediately after operation.

- There is risk of burns or frostbite, personal injury.

• If you touch the pipe or internal parts, you should be wear protection or wait

time to return to normal temperature.

- Otherwise , it may cause burns or frostbite, personal injury.

• Do not touch leaked refrigerant directly.

- There is risk of frostbite.

Safety Precautions

6Air-to-Water Heat Pump

• Make sure to install mixing valve (field supply). The mixing valve is setting

the water temperature. The hot water temperature maximum values shall be

selected according to the applicable legislation.

• Do not heated to a temperature of more than provided by the product.

- Otherwise, it may cause fire or damage of product.

• Two or more people must lift and transport the product.

- Avoid personal injury.

• Do not install the product where it will be exposed to sea wind (salt spray)

directly.

- It may cause corrosion on the product.

• Keep level even when installing the product.

- To avoid vibration or noise.

• Do not install the product where the noise or hot air from the unit could

damage or disturb the neighborhoods.

- It may cause a problem for your neighbors and hence dispute.

• Always check for gas (refrigerant) leakage after installation or repair of

product.

- Low refrigerant levels may cause failure of product.

• Do not use the product for special purposes, such as preserving foods,

works of art, etc. It is a consumer AWHP, not a precision refrigeration

system.

- There is risk of damage or loss of property.

• Do not block the inlet or outlet of air flow.

- It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents or splashing

water etc.

- There is risk of fire, electric shock, or damage to the plastic parts of the

product.

• Do not step on or put anyting on the product.

- There is risk of personal injury and failure of product.

• Do not insert hands or other objects through the air inlet or outlet while the

product is operating.

- There are sharp and moving parts that could cause personal injury.

• Be cautious when unpacking and installing the product.

- Sharp edges could cause injury.

CAUTION

Safety Precautions

Owner’s Manual 7

ENGLISH

• If the refrigerant gas leaks during the repair, do not touch the leakaing

refrigerant gas.

- The refrigernat gas can cause frostbite (cold burn).

• Do not tilt the unit when removing or uninstalling it.

- The condensed water inside can spill.

• Do not mix air or gas other than the specified refrigerant used in the system.

- If air enters the refrigerant system, an excessively high pressure results,

causing equipment damage or injury.

• If the refrigerant gas leaks during the installation, ventilate the area

immediately.

- Otherwise it can be harmfull for your health.

• Dismantling the unit, treatment of the refrigerant oil and eventual parts

should be done in accordance with local and national standards.

• Do not expose your skin or kids or plants to the cool or hot air draft.

- This could harm to your health.

• Use a firm stool or ladder when cleaning, maintaining or repairing the

product at an height.

- Be careful and avoid personal injury.

• The hot water may not be available immediately, during disinfection

operation or depending on the amount of hot water.

• During floor heating operation it is important to limit the minimum/maximum

water temperature.

Product Introduction

8Air-to-Water Heat Pump

Product Introduction

1. Indoor unit

2. Outdoor unit

3. Refrigerant pipe and connecting cable

4. Water pipe

5. Ground wire to ground outdoor unit to prevent electrical shocks.

The shape of products can be chaged according to the model capacity and type.

Water

Out

Water

Typical Installation Scene

Product Introduction

Owner’s Manual 9

ENGLISH

Remote Controller

OK On/Off Button

OK Button

Back button

Up/Down/Left/Right

Button

Operation display

window

Operation display window Operation and Settings status display

Back button When you move to the previous stage from the menu’s

setting stage

Up/down/left/right button When you change the menu’s setting value

OK button When you save the menu’s setting value

On/Off button When you turn ON/OFF the air conditioner

Operation Setting

10 Air-to-Water Heat Pump

You can easily control the desired operation mode.

In the main screen, press [<, > (left/right)] button to select the operation mode or home leave or hold

category, and press [∧, ∨(up/down)] button to set the operation mode.

※ Some products may not support some operation modes.

This mode is only applied to heating.

In order to save energy and to give highest comfort, setting temperature will follow outside tempera-

ture. If outdoor temperature decreases, heating capacity for the house will increase automatically in

order to keep same room temperature. All parameters will be set by installer during start-up proce-

dure and will be adapted to the site characteristic.

1. Select AI / Auto mode.

Operation mode

AI / Auto operation

Operation Setting

Mode Description

Cool The product yields cool water to use in FCU cooling.

Heat The product yields hot water to use in under floor heating or FCU heating.

AI / Auto In this mode, heating setpoint is automatically determined by pre-defined

temperature profile.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LG Wärmepumpe Handbücher

LG LD097HV4 Installations- und Betriebshandbuch

LG Multi F A2UW14GFA0 Produkthandbuch

LG Multi V CRUN Series Bedienungsanleitung

LG Multi V mini Installations- und Betriebshandbuch

LG THERMA V Series Bedienungsanleitung

LG MULTI V ARNH423K3A4 Bedienungsanleitung

LG Multi V SE Series Bedienungsanleitung

LG Multi IV Installations- und Betriebshandbuch

LG 0CVW0-01O Bedienungsanleitung

LG LC097HV4 Installations- und Betriebshandbuch

LG Multi V CRNN-SP Series Bedienungsanleitung

LG THERMA V Bedienungsanleitung

LG THERMA V Series Bedienungsanleitung

LG LUU180HV Bedienungsanleitung

LG THERMA V HN1639 Bedienungsanleitung

LG LRNN TE Series Bedienungsanleitung

LG THERMA V HN0916T Bedienungsanleitung

LG THERMA V HN0913T Bedienungsanleitung

LG THERMA V Bedienungsanleitung

LG MULTI V ARUN072BTE4 Bedienungsanleitung

LG MULTI V LRNN-BE Series Bedienungsanleitung

LG MULTI F MAX Installations- und Betriebshandbuch

LG ARWN038GA2 Bedienungsanleitung

LG THERMA V Bedienungsanleitung

Beliebte Wärmepumpe Handbücher anderer Marken

MICROWELL

MICROWELL HP 1000 GREEN Bedienungsanleitung

Sanyo

Sanyo SAP120FCH Bedienungsanleitung

Daikin

Daikin EHYHBH05AA Bedienungsanleitung

Panasonic

Panasonic WH-SDF03E3E5 Leitfaden

Bryant

Bryant 544B Bedienungsanleitung

Airxcel

Airxcel 45000 Series Handbuch

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung

Dimplex

Dimplex LI 16I-TUR Benutzerhandbuch

Carrier

Carrier WSHP Open v3 Kurzanleitung zur Einrichtung

TGM

TGM CTV14CN018A Bedienungsanleitung

Carrier

Carrier 38MGQ Series Bedienungsanleitung

Kokido

Kokido K2O K880BX/EU Fehlerbehebungshandbuch

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Kurzanleitung

Carrier

Carrier 48EZN Bedienungsanleitung

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Betriebsanleitung

Ariston

Ariston NIMBUS Bedienungsanleitung

Weishaupt

Weishaupt WWP L 7 Benutzerhandbuch

GE Zoneline AZ85H09EAC Bedienungsanleitung