LG LD15X740P2B Bedienungsanleitung
LED DOWNLIGHT
User Manual
• Please read the 「Safety Precautions」 prior to use for your safety.
• This manual is intended to prevent product damage and protect the user’s safety.
• Place the manual at a place where it can be easily located by all potential users.
MFL67082801,REV06,��.indd 1 11. 7. 12. �� 11:16
LED DOWNLIGHT
Application of high-eciency LED technology allows for tremendous energy reduction
and its excellent heat management solution allows a life expectancy of 50,000 hours or
more, making it an environmentally friendly product.
- 2 -
Advantages
42%
or more
increase in energy eciency
Existing lamp LG DOWN 15W
Excellent Alternative
Signicant energy savings over 42% through
replacement compared to conventional
26/52W downlight.
42€
13€
22€
32€
22€ 13€
76
%
42
%
Annual electricity cost
(Unit: EUR)
Annual maintenance cost
(Unit: EUR)
Annual cost reduction
Replacement Cost
Annual electricity Cost
Downlight LG Down 15W Downlight LG Down 15W
※
Based on 12 hrs operation per day, electricity cost €0.2/kwh and 0.54 times replacement.
※
Calculation result may dier by the lamp unit price, usage conditions and product lifetime.
Energy Saving by High
Eciency
Up to 76% energy saving yearly compared to
conventional downlight lamp.
×19
56
%
128.7
56.9
CO
2
emission
(Unit: kgCO
2
)
Downlight LG DOWN 23W
※
Based on 12 hrs operation per day yearly.
※
Conversion Factor 0.573 kgCO2/Kwh, 3.86 kgCO2/trees)
Eco-friendly
Eco-friendly light source, which contains no
mercury and low CO2 emission.
MFL67082801,REV06,��.indd 2 11. 7. 12. �� 11:16
Table of Contents
Dimming Control
Up to 70% cost saving with its automatic
dimming control by light sensor detection.
OFF 25% 50%
56
%
70
%
Reduction in electricity consumption
Dimming control system
23W
52W
15W
※
Dimming control is optional. The results may dier by operating condition.
LED DownDownlight LED Down(Dimming)
Low Heat Generation
Feeling comfortable and lowering cooling
costs compared with conventional
downlight.
Existing light LG DOWNLIGHT
Wide Application Coverage
Natural light with comfort for wide
application.
Department store/Retail Store/ Studio/Theater/Stage/Park/Parking lot , etc.
- 3 -
Application of high-eciency LED technology allows for tremendous energy reduction
and its excellent heat management solution allows a life expectancy of 50,000 hours or
more, making it an environmentally friendly product.
Safety Precautions ·····································4~7
Product Conguration and Information, Size
·········· 8
Installation ················································· 9~10
Things to check before Requesting
Repair Service
·····················································11
Product Specications ································12
Dimming Cable Connection ·····················13
Limited Warranty ···········································14
MFL67082801,REV06,��.indd 3 11. 7. 12. �� 11:16
Safety Precautions
The meanings of the signs displayed on the product and user manual are as follows
•
This sign indicates operations that might be dangerous and needs care with caution.
For parts with this sign, user must read the manual carefully and follow instructions in
order to avoid risks.
•
This sign displays risks involving electric shock under certain conditions.
Install a circuit
breaker.
• Risk of re and electric shock.
•
Violation of warnings may lead to serious injury or death.
•
Violation of precautions may lead to light injury or product damage.
Product is heavy.
Use a trolley when
transporting the
product.
•
Dropping the product may cause
product damage and malfunction.
Use with proper
rated voltage.
• Risk of re and product
damage.
Do not install product
in places exposed to
dampness.
• Risk of re.
- 4 -
Less than 95%
humidity
Less than
10%
WARNING
WARNING
CAUTION
MFL67082801,REV06,��.indd 4 11. 7. 12. �� 11:16
- 5 -
Perform grounding
work.
• Risk of electric shock.
Do not install on un-
leveled ceilings.
• Risk of product falling, which
may lead to product damage
and injury to the user.
Block power when
installing lighting
device.
• Risk of accidents such as
electric shock.
Use the device within
a temperature range
of 20°C to 50°C only.
• Using the device in high
temperatures may cause re
or shorten the LED's life span.
Do not store in a
humid area.
•
Risk of product malfunctioning.
Be careful not to
apply excessive force
to the power cable.
•
Otherwise, it may cause the
device to drop or result in
electric shock.
Do not randomly
connect the power
polarities.
• Risk of product damage and
accidents.
Safety Precautions
The meanings of the signs displayed on the product and user manual are as follows
•
This sign indicates operations that might be dangerous and needs care with caution.
For parts with this sign, user must read the manual carefully and follow instructions in
order to avoid risks.
•
This sign displays risks involving electric shock under certain conditions.
WARNING
Do not expose the
product to water
when cleaning it.
• Risk of re and electric shock.
MFL67082801,REV06,��.indd 5 11. 7. 12. �� 11:16
Do not stare directly
at the lamp when
turned on.
• Strong light may cause visual
impairment.
Must x the product
properly on the ceiling.
• Risk of product dropping and
causing injury to the user.
Do not use the product
if impurities are present
in the product or if the
product is submerged.
•
Risk of accidents such as electric
shock and product damage.
- 6 -
Do not use if the
product has been
dropped or exposed
to shock.
•
Risk of product malfunctioning.
Never disassemble
the product.
•
Risk of accidents such as electric
shock and product damage.
Electric work must be performed by a certied technician
according to ‘electrical device technology standards or
extension regulations’ or ‘indoor electrical wire specications’
and the installation manual. Specic circuits must be used.
•Inadequate power capacity and faulty electric work may lead to re or electric shock.
WARNING
If the lamp turns o by
itself, do not disassemble
the product. Contact the
service center for repair.
• It has risks of electric shock and
product malfunctioning.
MFL67082801,REV06,��.indd 6 11. 7. 12. �� 11:16
Do not cover the device
with clothes or paper,
or place it near
inammables.
• Otherwise, it may cause
malfunction of the device or re.
Keep some distance
between the lamp
and the object to be
illuminated.
• If the illumination distance is too
close or if the illumination is
on a material's surface, this may
cause discoloration or
deformation of the object or
cause re.
- 7 -
Do not use the device for purposes other than illumination.
(which include warming food, drying clothes, using under water, using as a search light,
shing or other events. )
• Otherwise, it may cause re or electric shock.
WARNING
• Do not wipe the surface with inammables, such as alcohol, benzene,
and acetone.
• Do not use the device in places with corrosive gases.
• The color and the brightness of the lamp may dier even among the
same model because the LED light source has "light dispersion".
CAUTION
MFL67082801,REV06,��.indd 7 11. 7. 12. �� 11:16
- 8 -
Product Conguration and Information, Size
Product Size
“B”
“C”
“A”
(Unit: mm)
Category 4 inch 6 inch 8 inch
Ceiling Cut-out Ø 100±5 Ø 155±5 Ø 200±5
“A” Ø 120 Ø 180 Ø 223
“B” 90 145 187
“C” 88 100 111
Product Conguration
Converter
Diffuser Plate
Main Body
Spring
Front Cover
※ Product Conguration may vary depending on the product.
Product Information
※ 23W and 37W products are not suitable for covering with thermally insulating material.
※ Asterisk(*) will vary by model.
Category 4 Inch 6 Inch 8 Inch
8W 15W 23W 37W
Product
Verication
3000K LD08X730M2B.D00***0 LD15X730P2B.D00***0 LD25X730P2B.D00***0 LD40X730R2B.D00***0
4000K LD08X740M2B. D00***0 LD15X740P2B.D00***0 LD25X740P2B.D00***0 LD40X740R2B.D00***0
5000K LD08X750M2B.D00***0 LD15X750P2B.D00***0 LD25X750P2B.D00***0 LD40X750R2B.D00***0
5700K LD08X757M2B.D00***0 LD15X757P2B.D00***0 LD25X757P2B.D00***0 LD40X757R2B.D00***0
MFL67082801,REV06,��.indd 8 11. 7. 12. �� 11:16
- 9 -
Drill and prepare the ceiling so that it can
accommodate the product (refer to page 8 for
product size).
1
Connect the 3 product cables to the interior
wiring of the building. For nishing cap, use
standardized products.
Connect the 3 product cables to the interior
wiring of the building. For nishing cap, use
standardized products.
2
3
Installation
Product Conguration and Information, Size
Make sure to turn o the main power switch o the installation space
before connection.
Connect so that the colors of the 3 power cables match.
(LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW)
Product’s power cables
Interior wiring of the building
NEUTRAL
LIVE
P.E.
[Completed installation]
WARNING
MFL67082801,REV06,��.indd 9 11. 7. 12. �� 11:16
Check to see if the product’s exterior surface is
installed on the ceiling so that there is no gap
between them.
6
Turn the power switch on to verify that the
product is working properly.
7
- 10 -
Insert the power cable in such a way that the
power cable does not get tangled between the
ceiling surface and the product.
4
Suciently lift the product so that the spring
can be inserted on the other side.
5
Installation
MFL67082801,REV06,��.indd 10 11. 7. 12. �� 11:16
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere LG Wohnraumbeleuchtung Handbücher
Beliebte Wohnraumbeleuchtung Handbücher anderer Marken
JONATHAN Y
JONATHAN Y JYL5019A Bedienungsanleitung
JONATHAN Y
JONATHAN Y JYL6007A Bedienungsanleitung
Philips
Philips Ledino 31606/11/16 Bedienungsanleitung
Salus
Salus UG600 Bedienungsanleitung
Safavieh Lighting
Safavieh Lighting CANDRI TBL4427A Bedienungsanleitung
Hunter
Hunter Bullet Spotlight Kit Gebrauchsanweisung
Schwaiger
Schwaiger NFL45 Bedienungsanleitung
FRITZ HANSEN
FRITZ HANSEN AQ01 PLUG-IN Bedienungsanleitung
MOOD
MOOD CORSIN JY-16 Bedienungsanleitung
Safavieh Lighting
Safavieh Lighting KREMP TBL4409A Bedienungsanleitung
JONATHAN Y
JONATHAN Y JYL8019 Bedienungsanleitung
XTRASUN
XTRASUN XTDEOKT1 Bedienungsanleitung