LG AW-52LG50MS Bedienungsanleitung

W-52LG50MS

-52LG50MS

W-60PG60MS

-60PG60MS

LSW600A

Bolts for guide spacer

AW-52LG50MS(M6X30)-4

AW-60PG60MS(M8X35)-4

LSW600A(M8X25)-4

4 Guide Spacer

4 Protection

cushion

Bolts for tilt wall

mounting bracket

AW-52LG50MS-6

AW-60PG60MS-8

LSW600A-8

Wall Anchor Bolt

Sleeves

AW-52LG50MS-6

AW-60PG60MS-8

LSW600A-8

2 Safety clip

Accessories

Slim tilt wall mounting bracket

Installation and

Setup Guide

RF Cable

* Only AW-52LG50MS

PC Cable HDMI CableCables for external

devices

* Only

AW-60PG60MS





After reading this manual, keep it in an easy to reach place.

- Qualified service technician should install the product properly after reading this manual thoroughly.

- Qualified service technician should hand this manual over to the customer after installation and ask him/her to

read and keep it.

Safety Instructions

WARNING

Do not install this product by yourself. Contact the

service technician qualified by the manufacturer.

It may cause injuries.

Do not install this product on a place where it cannot

be supported securely.

It may cause the product to fall and could cause injuries.

Contact the qualified service technician for

moving or replacing this product after installing.

Installing the product needs specified technical personnel, it

may cause safety problem to move or install it by yourself.

When mounting a TV on the wall, make sure not

to install TV by the hanging power and signal

cables on the back of the TV.

It may cause a fire or could give an electric shock.

Do not hang onto or impact on to this product.

It may cause the product to fall and could cause injuries.



ENGLISH

NOTES

Be sure to follow these instructions when installing

this product.

Otherwise it may cause serious injuries or damage of the product.

When drilling use drill and drill bit specified by

the manufacturer. And the depth of the hole

should meet the specifications.

Otherwise it may cause a safety problem.

Do not place a heat source (radiator or heater) or a

humidifier under the installed product.

It may cause a fire or could give an electric shock.

Make sure to unplug before installing this product.

Otherwise it may cause a fire or could give an electric shock.

Do not install this product near a sprinkler, a

sensor, a high voltage electric line, any power

source or the place where impact or vibration

can affect it.

Do not install this product barehanded.

It may cause injuries.

Two adults are needed when installing this product

and adjusting the height.

Otherwise, serious injury or product damage can occur.

Before installing, check whether the material of wall

satisfies the specifications and make sure to use

enclosed anchors supplied with the product.

Otherwise it may cause a safety problem.

Please only use the cables provided when connecting

it to the product. Using other cables will create friction

with the walls, possibly resulting in damage to the

walls or product.



Installation

Guide Spacer Install

- When attaching the guide spacer if bolts are loose verify bolts assembly depth one more time and refer to the

service manual.

1. If there are already bolts in the TV, remote them.

2. Insert the guide spacers (1) and then the bolts (2).

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

s At this time, tighten the bolt to more than 35kgf∙cm of torque.





Guide Spacer

bolts for guide spacer

(AW-52LG50MS-M6X30

AW-60PG60MS-M8x35)

LSW600A-M8X25)



ENGLISH

Installing Anchors

- Using the hole-drilling template provided, mark the positions of the anchor holes shown on the drawing in the

wall; using a centre-punch or other device to clearly identify the 10 drill hole positions.

Note: It is advisable to use a bubble level to make sure that the template is horizontally true.

- Warning: The surface that the tilt wall mounting bracket is to be mounted on should be of sufficient strength to

support the weight of the monitor and speakers typically; concrete, strong/weak natural rock, brick and hollow

block.

- Warning: Plasterboard is not a sufficiently strong enough material; unless the bolts are anchored into standard

construction type studs capable of supporting the weight of the monitor and speakers. If you can not

determine the strength of the material, each drilled hole should be capable of supporting a normal stress level

of 70kgf (686N) and shear stress 100kgf (980N).

Keep these instructions for future reference

a b

a. Using an 8mm drill appropriate for the material on the wall, drill each hole to a depth of 80mm/3.15inches –

100mm/3.94inches.

b. Clean each drilled hole.

c. Insert an anchor supplied with the tilt wall mounting bracket into each hole.

d. Mount the tilt wall mounting bracket on the wall. And push the guide control part upward.

e. Assembled in holes carefully. At this time, tighten the bolt to over 45kgf∙cm of torque.

Bolts for tilt wall mounting bracket

Anchor



Attaching the Wall Bracket

If it’s not possible to use the indicated bolt holes,

use the closet ones. Don’t go more than two

away from the indicated position.

AW-52LG50MS Model

Wall mounting equipment will be set up based in

VESA 800X400 regulation.

Fix the upper right and left side with two bolts

each, and fix the bottom right and left side with

one bolt each.

AW-60PG60MS / LSW600A Model

Wall mounting equipment will be set up based in

VESA 600X400 regulation.

Fix the right and left side with two bolts each.



< Fixing Bolts >

When mounting a bracket in a place other than the

designated wall, fix it to the concrete inside the finishing

materials with long bolts and nuts as shown in the

illustration. Bolts and nuts in the illustration are sold

separately.

AW-52LG50MS

ENGLISH



How to connect a bracket with the product/adjust horizontal level



< How to connect the wall mount supporter and product >

Work in the order of figure

1. Carefully lift up the product and place it in position on the tilt wall mounting bracket securely as shown by arrow 1.

2. When adjusting the horizontal level, use the safety ring provided by pressing it slightly to in the direction as illustrated.

(See number in the illustration.)

There is a risk of the product falling when the safety ring is not used as shown in the illustration.

Pull the bottom of the TV/Monitor to affirm that it is firmly fixed.

See A above,be sure to lift a product/speakers assembly by the product only, do not lift using only the speakers.)

Horizontal level adjustment



If the product leans to one side, adjust the tilt with bolt 3 (M5x20). The product tilt is changed according to bolt’s

rotation direction.



- Always have more than 2 people hold the product for installation.

* Connecting the wall mount

bracket and safety clip

Safety clip









5Tilt Angle Adjustment



Use both hands when adjusting the angles. Do not place the hands on the TV’s back side or the wall mount

while adjusting. If could cause injury.



Two adult people who are capable of adjusting the tilt angle to need excessive force.



When adjusting the number



angle of the product, you must use both hands and then you can adjust the angle

as shown above.



When adjusting the number



angle of the product, you must use both hands and then you can adjust the angle

as shown above.



When adjusting the number



angle of the product, you must use both hands and then you can adjust the angle

as shown above.



When adjusting the number



angle of the product, you must use both hands and then you can adjust the angle

as shown above.

- The tilt angle can be adjusted after installation and setup.

- When you adjust the angle, hold the product carefully with both hands to avoid any damage to the product or wall.

 













The above numbers are the maximum allowed, some models may do less.(Upper picture explains the features available on

the 60 inch Plasma.)

     

 











ENGLISH

How to adjust height

It is possible to move the set upward and downward by as much as 80mm.

Please use both hands when adjusting the set upward and downward. Do not forget to remove the bolts on both sides of the set

before adjusting the height. Anchor the bolts again after height adjustment.

Use 14~55kgf of power when adjusting the set upward or downward.

 

 

 



AW-52LG50MS / AW-60PG60MS :

Two adults are needed when installing the product and adjusting the height.

LSW600A : Three adults are needed when installing the product and adjusting the height.

Otherwise, serious injury or product damage can occur.



7How to adhere the protection cushions and arrange cables



Use the protection cushions to reduce shock between the wall and TV/Monitor.



Arrange the cable like shown. You can purchase the cable holder separately or use it provided like accessory of

the TV/Monitor get.

protection

cushion

Please use only the provided PC cable, HDMI cable, and correct cables for external devices. They are optimized for this slim wall mounting.

Cables for slim wall mounting have a shorter end than that of common cables. This protects the TV such that the cables do not reach the wall

when TV is pushed to the wall.

Only use the coaxial lines and power cords provided with the TV.

When using coaxial cables other than provided, connect by using a jack shaped as '' , sold separately.

Please contact the agency or an LG Service Center if you wish to purchase extra cables for slim wall mounting.

 



Use the provided cables and connect them to the terminal backside. For detailed information on this, please refer to the user

guide provided with the TV.

HDMI Cable / PC Cable / Cables for external devices / RF Cable





Dieses Handbuch passt für folgende Modelle

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung