LG ST-70UL3DT Bedienungsanleitung

*MFL71140701*

Desktop Stand

Owner's Manual

ST-60UL3RB

ST-70UL3DT

SPECIFICATIONS

Model Width x Height x Depth Weight

ST-60UL3RB 69 x 79 x 255 (mm)

2.7 x 3.1 x 10.0 (inches)

0.2 (kg)

0.4 (lbs)

ST-70UL3DT 120 x 95.5 x 297 (mm)

4.7 x 3.7 x 11.6 (inches)

0.7 (kg)

1.5 (lbs)

Accessories

12 14 16 20

Owner's Manual Screws (M4 x L20)

6 EA

Stand

(1811-REV00)

www.lg.com

Reserved.

Printed in Korea

Model Monitor Signage Model

ST-60UL3RB 60UL3E-BJ

ST-70UL3DT 70UL3E-TJ

ENGLISH

※The illustrations in this manual are provided to help

our customers’ understanding of the product and

may differ from the actual product.

IMPORTANT PRECAUTIONS

Please read this manual carefully and retain it for

future reference.

WARNING

When lifting or moving

the product, at least two

people are required due to

the heavy weight of the

product.

The product may fall down,

causing a malfunction or

injury.

Do not let children hang on

or climb onto the monitor.

The monitor may fall down,

causing an injury or even death.

CAUTION

Do not install the product

in a place which is unstable

or vibrating or a place

where the product is not

completely supported such

as a shaky shelf or a tilted

place.

The product may fall down or

overturn, causing an injury or

malfunction.

Put the product on a flat

and firm floor.

The product may fall and

cause an injury.

When moving or handling a product assembled

with the Desktop Stand, be cautious about

damaging the exterior of the product.

When there is a stain or fingerprint left on the

surface, wipe it off gently.

When removing a stain, do not use excessive force.

Wiping with excessive force may cause scratches or

discoloration on the product.

How to Assemble the Stand

WARNING

▪When assembling the Stand, put the product on a

table or a flat floor with its screen facing downward.

Here, first put a soft and fluffy cloth on the place,

and then put the product on top of it to prevent the

screen from being damaged.

▪When assembling the Stand, check if the screws

are completely fastened. (If they are not completely

fastened, the product may lean forward after being

installed.) Avoid fastening the screws with excessive

force because otherwise the joint part of the screws

may be worn out, and the screws might come off.

▪When assembling the product, do not use foreign

substances (oil, lubricant, etc.) on the screws. (It

may cause damage to the product.)

CAUTION

▪Before installing a wall mount support, disassemble

the Stand by conducting the method to assemble

the Stand in a reverse order.

ENGLISH

360UL3E

ENGLISH

Mounting on a Table

Lift and tilt the monitor into its upright position on a

table.

-Leave a 10 cm (4 inches) (minimum) space from

the wall for proper ventilation.

10 cm

(4 inches)

▪Do not apply foreign substances (oils,

lubricants, etc.) to the screw parts when

assembling the product. (Doing so may

damage the product.)

▪If you install the monitor on a stand,

you need to take actions to prevent the

product from overturning. Otherwise, the

product may fall over, which may cause

injury.

▪Do not use any unapproved items to

ensure the safety and product life span.

▪Any damage or injuries caused by using

unapproved items are not covered by the

warranty.

▪Make sure that the screws are fastened

tightly. (If they are not fastened securely

enough, the monitor may tilt forward after

being installed.)

▪Do not fasten the screws with excessive

force otherwise they may be worn out and

become loose.

▪Only use the authorized stand and wall

mounting bracket made specifically for LG

products.

-Pursuant to Consumer Protection Law, LG

Electronics will not be held responsible for

any product malfunction, material damage

or injury caused by using products not

authorized by LG Electronics.

Securing the product to a

wall (optional)

1 Insert and tighten the eye-bolts, or product brackets

and bolts on the back of the product.

- If there are bolts inserted at the eye-bolts position,

remove the bolts first.

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-

bolts on the rear of the product.

3 Connect the eye-bolts and wall brackets tightly with

a sturdy rope. Make sure to keep the rope horizontal

with the flat surface.

•Use a platform or cabinet that is strong and large

enough to support the product securely.

•Brackets, bolts, and ropes are optional. You can

obtain additional accessories from your local dealer.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung