LG ThinQ WKM7 Bedienungsanleitung

OWNER’S MANUAL

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

WK7 WKM7

www.lg.com

MFL71481822

1906_Rev01

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s

enclosure that may be of sufcient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing) instructions

in the literature accompanying the

product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings should never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

Getting Started 3

Getting Started

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could result

in electric shock or re. Periodically examine the

cord of your device, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of

the device, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the device.

NOTICE: For safety marking information including

product identication and supply ratings, please refer

to the main label on the bottom or the other surface

of the product.

CAUTION when using this product in environments

of low humidity

yIt may cause static electricity in environments of

low humidity.

yIt is recommended to use this product after

touching any metal object which conducts

electricity.

CAUTION: Only use the AC adapter supplied with

this device. Do not use a power supply from another

device or another manufacturer. Using any other

power cable or power supply may cause damage to

the device and void your warranty.

Getting Started4

Getting Started

Symbols

~Refers to alternating current (AC).

0Refers to direct current (DC).

Refers to class II equipment.

1Refers to stand-by.

!Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents 5

1 Getting Started

2 Safety Information

6 Unique features

6 Introduction

7 Front

8 Rear

2 Connecting

9 Network connection

9 Setting up the Speaker

9 – Connecting the AC Adapter

10 – Installing “Google Home” App

10 – Launch the app to connect Wi-Fi

12 – Reference site for Google Assistant Help

3 Operating

13 Basic Operations

13 – Function LED status

14 – Simple Operation Guide

15 How to use the Google Assistant

15 – Google Assistant LED status

15 – Talk to the Google Assistant

16 – Comfortable Function

16 – Voice command

18 LG Wi-Fi Speaker

18 – Installing "LG Wi-Fi Speaker" App

19 – BLUETOOTH connection lock

19 – Sound effect

20 Using BLUETOOTH® technology

20 – Listening to music stored on the

BLUETOOTH devices

22 Other Operations

22 – Turn off the microphone temporarily

22 – Auto function change

23 – Edit speaker name

23 – Resetting

4 Troubleshooting

24 Troubleshooting

24 – General

25 – Network

25 – Application

5 Appendix

26 Trademarks and Licenses

26 Handling the Unit

27 OPEN SOURCE

28 Specifications

Table of Contents

Getting Started6

Getting Started

Unique features

BLUETOOTH®

Listen to music stored on your Bluetooth device.

"Google Home" application

You can enjoy various functions of this speaker by

connecting to network and your smart device with

"Google Home" app.

The speaker and your smart device must be

connected to the same network. Visit or "Google

Play” or “App Store” to search for "Google Home"

app. For detailed information, refer to page 10

Voice recognition

You can use a variety of voice commands to control

the speaker with Google Assistant.

"LG Wi-Fi Speaker" application

Listens to music stored on your smart device.

You can control this speaker with your iPhone or

Android device via "LG Wi-Fi Speaker" app. Visit

"Google Play” or “App Store” to search for "LG Wi-Fi

Speaker" app. For detailed information, refer to page

yDepending on the application’s version and the

software of smart device, "LG Wi-Fi Speaker" app

may not be operated normally.

ySome smart devices may not be compatible with

this speaker.

Introduction

Symbol used in this manual

, Note

Indicates special notes and operating features.

> Caution

Indicates cautions for preventing possible damages

from abuse.

Getting Started 7

Getting Started

Front

Plays, pauses or skip playback.

Function LED

Changes LED status in according function.

Bluetooth: Blue / Wi-Fi: White (Page 13)

(Function)

Changes Wi-Fi or Bluetooth. (Page 14)

- Use in instead of saying "Hey Google" by long

pressing the (Page 15)

- Plays or pauses a music and stops the Google

Assistant feedback. (Page 14)

Adjusts the volume.

Built-in microphones

Google Assistant LED

Changes LED status according to Google

Assistant performance. (Page 15)

Precautions in using the touch buttons

yUse the touch buttons with clean and dry

hands.

- In a humid environment, wipe out any

moisture on the touch buttons before using.

yDo not press the touch buttons hard to make

it work.

- If you apply too much strength, it can be

damaged the sensor of the touch buttons.

yTouch the button that you want to work in

order to operate the function correctly.

yBe careful not to have any conductive

material such as metallic object on the touch

buttons. It can cause malfunctions.

, Note

Getting Started8

Getting Started

Rear

b c

a (Microphone off) button

Enables or disables the Google Assistant

Microphone (voice recognition) (Page 22)

DC IN (AC adapter input)

RESET

Initialize information of existing connection.

(Page 23)

2 Connecting

Connecting 9

Connecting

Network connection

You can enjoy various functions of this speaker by

connecting to network and your smart device with

"Google Home" app.

Choose the connection method considering your

network environment.

The "Google Home" app is required to connect the

speaker wirelessly to the network.

Setting up the Speaker

Connecting the AC Adapter

Connect the speaker to the power supply with the

supplied AC adapter.

1. Connect the supplied AC power cord to DC IN

adapter input.

2. Plug the AC power cord into an AC outlet.

3. Function LED rotates for tens of seconds (Approx.

30 ~ 50 seconds) during booting.

4. The speaker has completed booting when

Function LED blinks in white with the sound.

If the speaker is connected to Wi-Fi, Function

LED is solid white when booting is completed.

, Note

Only use the AC adapter supplied with this

device. Do not use a power supply from another

device or manufacturer. Using any other power

cable or power supply may cause damage to the

device and void your warranty.

> Caution

Connecting10

Connecting

Installing “Google Home” App

The "Google Home" app allows you to use various

functions of this speaker through your smart device:

There are a ways to install “Google Home” app onto

your Smart device.

Requirements before setup

yA wireless router must be connected to the

internet. A smart device such as Android or iOS

devices must be connected to the wireless router

via Wi-Fi connection.

yIt needs Google account to use this app. During

connect Wi-Fi, this app may request to create

Google account.

Through "Google Play or “App Store”

1. Tap the“Google Play Store” icon or “App Store”

icon on your smart device.

2. Type in “Google Home” in the search bar and tap

“Search” on “Google Play” or “App Store”

3. Select “Google Home” in the search result list to

download.

Google Home

yDepending on the device version, “Google

Home” app may not work.

yFor more information, visit the web site.

https://www.google.com/cast/setup/

, Note

Launch the app to connect Wi-Fi

Make sure your smart device Wi-Fi feature is turned

on. Once a connecting operation is performed, it does

not need to be performed again.

In case of iOS devices, it should be turned on

Bluetooth setting on your smart device.

, Note

1. Tap the "Google Home" icon to launch the app.

2. Follow the screen on app to set speaker. Follow

these instructions in order.

For more information on the setup, visit the web

site. https://support.google.com/googlehome/

answer/7029485?hl=en

yUse the same Wi-Fi connection to set the

speaker and your smart device.

yIf the Bluetooth setting turned on your

smart device, it will be easy to connect Wi-Fi.

yDuring installation, you should create a

speaker name. It is needed when pairing the

Bluetooth device. You can check and edit

the speaker name. Follow the “Edit speaker

name”. (Page 23)

, Note

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung