Lightmaxx Platinum EXEO Scan LED Bedienungsanleitung

Bedienungsanleitung

Seite: 1-4

User Manual

Page: 5 - 10

LIG0009235-000

Lieber Kunde,

vielen Dank das Sie sich für ein Produkt von LightmaXX entschieden haben. In der

folgenden Anleitung erhalten Sie wichtige Informationen über dieses Produkt sowie

deren Eigenschaften und Funktionen.

Technische Daten:

Spannungsversorgung:

230 V AC, 50Hz

Leistung:

90 Watt

LED System:

1x 60 Watt Weisslicht LED

Features:

10 DMX Kanäle

8 Farben + Weiss

7 Gobos + offen

Motorischer Fokus

3-fach Prisma

Betriebsfunktionen:

ADDR

A001 –A512

DMX Start-Adresse

SOUND

MAST (SO-M)

Sound Aktiv als Mastergerät

ALON (SO-A)

Sound Aktiv eigenständig

AUTO

MAST (AU-M)

Automatikbetrieb als Mastergerät

ALON (AU-A)

Automatikbetrieb eigenständig

RPAN

ON/OFF

PAN Bewegung tauschen / umkehren

RTIL

ON/OFF

TILT Bewegung tauschen / umkehren

RDIS

ON/OFF

Display anzeige drehen

MIC

M-XX

Empfindlichkeit des internen Mikrofons

FITI

0000 –9999 Stunden

Betriebsstundenanzeige

REST

RESET

LOAD

Datentransfer / Ladezustand

DMX Protokoll:

Kanal

Name

DMX Wert

Funktion

PAN

0-255

Pan Bewegung

TILT

0-255

Tilt Bewegung

Farb Rad

0-13

Weiss

14-27

Gelb

28-41

Rose Pink

42-55

Grün

56-69

Pink

70-83

Blau

84-97

Grün/Yellow

98-111

Deep Straw

112-127

Pink

128-190

Regenbogeneffekt, Vorwärts

191-255

Regenbogeneffekt, Rückwärts

Gobo Rad

0-9

Offen

10-19

gobo 1

20-29

gobo 2

30-39

gobo 3

40-49

gobo 4

50-59

gobo 5

60-69

gobo 6

70-79

gobo 7

80-99

gobo 1 shake

100-119

gobo 2 shake

120-139

gobo 3 shake

140-159

gobo 4 shake

160-179

gobo 5 shake

180-199

gobo 6 shake

200-219

gobo 7 shake

220-255

Goborad Rotation

Gobo Rotation

0-127

Keine Rotation

128-191

Gobo Rotation vorwärts

192-255

Gobo Rotation rückwärts

Focus

0-255

Motorischer Fokus

Shutter

0-9

geschlossen

10-19

Offen

20-127

Strobe effekt 1

128-137

offen

138-201

strobe effekt 2

202-255

Offen

Dimmer

0-255

Intensität von 0 bis 100%

Prisma

0-3

Offen

4-127

Prisma aktiv

128-255

Rotation

Function/Program

0-59

Reserved

60-79

Farbrad und Goborad Reset

80-99

Komplett Reset

100-119

Start internes Programm 1

120-139

Start internes Programm 2

140-159

Start internes Programm 3

160-179

Start internes Programm 4

180-199

Start internes Programm 5

200-219

Start internes Programm 6

220-239

Start internes Programm 7

240-255

Start internes Programm 8

www.musicstore.de

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

For your own safety, please read this user manual carefully before you initial start-up.

Every person involved with the installation, operation and maintenance of this device has to

- be qualified

- follow the instructions of this manual

- keep this manual for the entire service life of the product

- pass this manual on to every further owner or user of the product

INTRODUCTION

Thank you for having chosen the latest DMX LED SCANNER 60W. You will see you have acquired powerful and

versatile device.

Unpack your unit.

SAFETY INSTRUCTIONS

CAUTION!

Be careful with your operations. With a dangerous voltage you can suffer a

dangerous electric shock when touching the wires!

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a

safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this

user manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept

liability for any resulting defects or problems.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on

immediately. The arising condensation water might damage your device. Leave the device switched off until it has

reached room temperature.

Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C

connection cable or on the casing, do not take the device into operation and immediately consult your local dealer.

This device falls under protection-class I. The power plug must only be plugged into a protection class I outlet. The

voltage and frequency must exactly be the same as stated on the device. Wrong voltages or power outlets can lead to

the destruction of the device and to mortal electrical shock.

Always plug in the power plug last. The power plug must always be inserted without force. Make sure that the plug is

tightly connected with the outlet.

Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the

mains with particular caution! Never touch them with wet hands, as this could lead to mortal electrical shock.

Never modify, bend, strain mechanically, put pressure on, pull or heat up the power cord. Never operate next to

sources of heat or cold. Disregard can lead to power cord damages, fire or mortal electrical shock.

The cable insert or the female part in the device must never be strained. There must always be sufficient cable to the

device. Otherwise, the cable may be damaged which may lead to mortal damage.

Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the power-cord

from time to time.

If extension cords are used, make sure that the core diameter is sufficient for the required power consumption of the

device. All warnings concerning the power cords are also valid for possible extension cords.

Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power-cord by

the plug. Never pull out the plug by tugging the power-cord. Otherwise, the cable or plug can be damaged leading to

mortal electrical shock. If the power plug or the power switch is not accessible, the device must be disconnected via

the mains.

If the power plug or the device is dusty, the device must be taken out of operation, disconnected and then be cleaned

with a dry cloth. Dust can reduce the insulation which may lead to mortal electrical shock. More severe dirt in and at

the device should only be removed by a specialist.

There must never enter any liquid into power outlets, extension cords or any holes in the housing of the device. If you

suppose that also a minimal amount of liquid may have entered the device, it must immediately be disconnected. This

is also valid, if the device was exposed to high humidity. Also if the device is still running, the device must be checked

by a specialist if the liquid has reduced any insulation. Reduced insulation can cause mortal electrical shock.

There must never be any objects entering into the device. This is especially valid for metal parts. If any metal parts like

staples or coarse metal chips enter into the device, the device must be taken out of operation and disconnected

immediately. Malfunction or short-circuits caused by metal parts may cause mortal injuries.

During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean

that the device is defective.

Caution: During the operation, the housing becomes very hot.

Do not switch the device on and off in short intervals as this would reduce the lamp’s life.

HEALTH HAZARD!

Never look directly into the light source, as sensitive persons may suffer an

epileptic shock (especially meant for epileptics)!

Keep away children and amateurs! Never leave this device running unattended.

OPERATING DETERMINATIONS

This device is a lighting effect for creating decorative effects. This product is only allowed to be operated with an

alternating voltage of 230 V, 50 Hz and was designed for indoor use only.

This device is designed for professional use, e.g. on stages, in discotheques, theatres etc.

Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the device will

serve you for a long time without defects.

Do not shake the device. Avoid brute force when installing or operating the device.

When choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture or

dust. There should not be any cables lying around. You endanger your own and the safety of others!

This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog may harm

the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical shocks. When using

smoke machines, make sure that the device is never exposed to the direct smoke jet and is installed in a distance of

0.5 meters between smoke machine and device. The room must only be saturated with an amount of smoke that the

visibility will always be more than 10 meters.

The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation (particularly in

cars) and heaters.

The relative humidity must not exceed 50 % with an ambient temperature of 45° C.

This device must only be operated in an altitude between -20 and 2000 m over NN.

Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the device

during thunderstorms.

The symbol determines the minimum distance from lighted objects. The minimum distance between light-

output and the illuminated surface must be more than 0.5 meters.

This device is only allowed for an installation via the mounting bracket. In order to safeguard sufficient ventilation,

leave 50 cm of free space around the device.

The housing must never touch surrounding surfaces or objects.

Make sure that the area below the installation place is blocked when rigging, de-rigging or servicing the fixture.

Always fix the fixture with an appropriate safety-rope.

The maximum ambient temperature ta = 45° C must never be exceeded.

Operate the device only after having familiarized with its functions. Do not permit operation by persons not qualified for

operating the device. Most damages are the result of unprofessional operation!

Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.

Please use the original packaging if the device is to be transported.

Please consider that unauthorized modifications on the device are forbidden due to safety reasons!

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-circuit,

burns, electric shock, lamp explosion, crash etc.

Occupation of the XLR-connection:

DMX-output

XLR mounting-socket:

DMX-input

XLR mounting-plug:

1: Ground

2: Signal -

3: Signal +

1: Ground

2: Signal –

3: Signal +

If you are using controllers with this occupation, you can connect the DMX-output of the controller directly with the

DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other XLR-outputs, you

need to use adapter-cables.

Building a serial DMX-chain:

Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture. Always connect

one output with the input of the next fixture until all fixtures are connected.

Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 Ohm resistor between

Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture.

Addressing

Each projector occupies 7 channels. To ensure that the control signals are properly directed to each projector, the

projector requires addressing. This is to be done for every single projector by changing the LED display as set out in

this table.

The starting address is defined as the first channel from which the DMX LED SCANNER 60W will respond to the

controller.

Please make sure that you don’t have any overlapping channels in order to control each DMX LED SCANNER

correctly and independently from any other fixture on the DMX data link. If two, three or more DMX LED SCANNERs

are addressed similarly, they will work similarly.

Connection with the mains

Connect the device to the mains with the enclosed power supply cable.

The occupation of the connection-cables is as follows:

Cable

International

Brown

Live

Blue

Neutral

Yellow/Green

Earth

The earth has to be connected

OPERATION

After you connected the effect to the mains, the DMX LED SCANNER starts running. During the Reset, the motors are

trimmed and the device is ready for use within approximately 20 seconds.

Turn the objective-lens for adjusting the focus in order to obtain a sharp projection.

LED display instructions:

A001~AXXX (AXXX)

DMX Address

SOUND

MAST (SO-M)

Sound active as MASTER

fixture

ALON (SO-A)

Sound active independently

AUTO

MAST (AU-M)

Auto run as MASTER

fixture

ALON (AU-A)

Auto run independently

RPAN

ON/OFF

Reverse pan

RTIL

ON/OFF

Reverse tilt

RDIS

ON/OFF

Display upside down

MIC

M-XX

Sound sensitivity

FITI

0000-9999Hour

Fixture using time

REST

Reset

LOAD

Loading datas

DMX Protocol:

Channel

Name

DMX

VALUE

PAN

0-255

Pan Movement By 540/360

TILT

0-255

Tilt Movement By 270

Colour Wheel

0-13

White

14-27

Yellow

28-41

Rose Pink

42-55

Green

56-69

Pink Carnation

70-83

Blue

84-97

Spring Yellow

98-111

Deep Straw

112-127

Pink

128-190

Forwards rainbow effect with increasing speed

191-255

Backwards rainbow effect with increasing speed

Gobo Wheel

0-9

Open

10-19

gobo 1

20-29

gobo 2

30-39

gobo 3

40-49

gobo 4

50-59

gobo 5

60-69

gobo 6

70-79

gobo 7

80-99

gobo 1 shake from slow to fast

100-119

gobo 2 shake, from slow to fast

120-139

gobo 3 shake, from slow to fast

140-159

gobo 4 shake, from slow to fast

160-179

gobo 5 shake, from slow to fast

180-199

gobo 6 shake, from slow to fast

200-219

gobo 7 shake, from slow to fast

220-255

Gobo wheel rotation with increasing speed

Bobo Rotation

0-127

No rotation

128-191

forwards gobo rotation with increasing

speed

192-255

Backwards gobo rotation with increasing

speed

Focus

0-255

Continuous adjustment from far to near

Shutter

0-9

closed

10-19

open

20-127

Strobe effect 1 with increasing speed

128-137

open

138-201

strobe effect 2 with increasing speed

202-255

open

Dimmer

0-255

Intensity 0 to 100%

Prism

0-3

open

4-127

128-255

Rotation from fast to slow

Function/Program

0-59

Reserved

60-79

colour Motor and gobo Motor reset

80-99

all Motor reset

100-119

Run with Internal program 1 built-in

120-139

Run with Internal program 2 built-in

140-159

Run with Internal program 3 built-in

160-179

Run with Internal program 4 built-in

180-199

Run with Internal program 5 built-in

200-219

Run with Internal program 6 built-in

220-239

Run with Internal program 7 built-in

240-255

Run with Internal program 8 built-in

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an expert after

every four years in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are inspected by a skilled

person once a year.

The following points have to be considered during the inspection:

1) All screws used for installing the devices or parts of the device have to be tightly connected and must not be

corroded.

2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension, trussing).

3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments.

Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any

safety problems have to be removed.

DANGER TO LIFE!

Disconnect from mains before starting maintenance operation!

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents!

The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.

There are no serviceable parts inside the device except for the lamp and the fuse. Maintenance and service

operations are only to be carried out by authorized dealers.

TECHNICAL SPECIFICATIONS

Power supply: 230 V/50 Hz

Power consumption: 90W

Led: 60W white LED

DMX-control-channels: 10CH

DMX-512-connection: 3-pin XLR

Sound-control: via built-in microphone

Number of colours: 8 dichroic + white

Number of gobos: 7 gobos + open

PAN-movement: within 180°

TILT-movement: within 90°

Fuse: F2A, 250V.

Packing Size (LxWxH): 465 x 200 x 150 mm

Net Weight: 5.0 kg

www.musicstore.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lightmaxx DJ-Equipment Handbücher

Lightmaxx

Lightmaxx Vega PAR RGB Bedienungsanleitung

Lightmaxx

Lightmaxx Platinum Line COB PAR 56/64 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega PAR FX I Bedienungsanleitung

Lightmaxx

Lightmaxx Complete Spot ARC Bedienungsanleitung

Lightmaxx

Lightmaxx VEGA ARC Pro II MKII Bedienungsanleitung

Lightmaxx

Lightmaxx LED Mega PAR 64 144 Watt RGBW Bedienungsanleitung

Lightmaxx

Lightmaxx Vector Silent PAR ARC Bedienungsanleitung

Lightmaxx

Lightmaxx LIG0009432-000 Bedienungsanleitung

Lightmaxx

Lightmaxx Nano Spot ARC Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Pixel BAR Bedienungsanleitung

Lightmaxx

Lightmaxx Platinum LED Par 64 Tri-LED polish Bedienungsanleitung

Lightmaxx

Lightmaxx Cannon Shot FX TWO Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Strobe 600 Bedienungsanleitung

Lightmaxx

Lightmaxx Vector Haze 1.7 Bedienungsanleitung

Lightmaxx

Lightmaxx CLS FX Bedienungsanleitung

Lightmaxx

Lightmaxx Nano Sphere Six Bedienungsanleitung

Lightmaxx

Lightmaxx TRI-Star Bedienungsanleitung

Lightmaxx

Lightmaxx Vector BAT LED Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Hyper Spot Bedienungsanleitung

Lightmaxx

Lightmaxx Vector Haze 1.0 Bedienungsanleitung

Lightmaxx

Lightmaxx TRICORNO LED LIG0009559-000 Bedienungsanleitung

Lightmaxx

Lightmaxx Vega BAT LED Bedienungsanleitung

Lightmaxx

Lightmaxx VEGA ARC Pro I MKII Bedienungsanleitung

Lightmaxx

Lightmaxx Platinum Tour Spot ARC Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung