Lightmybricks LEGO 1989 Batmobile Bedienungsanleitung

The following page is the instructions for the Light My Bricks LEGO 1989

Batmobile (76139) LED light kit.

If you run into any issues, please refer to the online troubleshooting guide.

To ensure a trouble-free installation of your light kit, please read and follow

each step carefully. These instructions can be downloaded in PDF format here

Please note: This page lists instructions for the LED light kit only. If you are

wishing to purchase the Light My Bricks LEGO 1989 Batmobile (76139) LED light

kit , please click here to view the product page

LIGHT MY BRICKS: LEGO 1989 Batmobile 76139

Lighting Kit

Package Contents:

8x White 15cm Bit Lights

6x Warm White 30cm Large Bit Lights

2x Cool White 30cm Bit Lights

4x Red 30cm Bit Lights

1x Rotating White 30cm Bit Light

1x White Strip Light

1x Flicker Effects Board

1x Gun Effects Board

1x NC Push Board

1x 6-Port Expansion Board

2x 8-Port Expansion Boards

1x 12-Port Expansion Board

3x 5cm Connecting Cables

3x 15cm Connecting Cables

1x 50cm Connecting Cable

8x Adhesive Squares

1x AA Battery Pack

LEGO Pieces:

2x Black Round Plate 1×1 with open stud

Important things to note:

Laying cables in between and underneath bricks

Cables can ﬁt in between and underneath LEGO® bricks, plates, and tiles

providing they are laid correctly between the LEGO® studs. Do NOT forcefully

join LEGO® together around cables; instead ensure they are laying comfortably

in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the

cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards.

Connectors can be inserted only one way. With the expansion board facing up,

look for the soldered “=” symbol on the left side of the port. The connector side

with the wires exposed should be facing toward the soldered “=” symbol as you

insert into the port. If a plug won’t ﬁt easily into a port connector, do not force it.

Incorrectly inserting the connector can can result in bent pins inside the port

or possible overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure

the side of the connector with the wires exposed is facing down. If a plug won’t

ﬁt easily into a port connector, don’t force it. Doing so will damage the plug and

the connector.

Connecting Micro Cable connectors to Micro

Expansion Board Ports

Take extra care when inserting the micro connectors to micro ports of Micro

Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is

similar to connecting lights and cables to Strip Lights. With the expansion

board facing up, ensure the side of the connector with the wires exposed is

facing down. If a plug won’t ﬁt easily into a port connector, do not force it. Use

your ﬁngernail to push the plastic part of the connector to the micro port.

Installing Bit Lights under LEGO® bricks

and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the

correct way up (Yellow LED component exposed). You can either place them

directly on top of LEGO® studs or in between.

OK, Let’s Begin!

1.) We will ﬁrst install the headlights to the batmobile. Carefully remove the two

headlight sections, then ﬂip them over and disassemble the right headlight

section as shown below.

Take a Warm White 30cm Large Bit Light and with the LED facing the

opposite side to the sticker, place it inside the trans yellow brick. Bring the cable

down the side where the sticker is, then secure the Bit Light in place by

reconnecting the trans yellow plate over the top.

Repeat this step to install another 2x Warm White 30cm Large Bit Lights to

the other two headlight pieces, then reconnect each one to the right headlight

ensuring the LEDS are facing to the front.

2.) Bring the ends of the three bit light cables together and thread them

through the space behind the headlights. Turn the batmobile onto it’s left side

so we can access underneath. Find the three cables we threaded through

behind the headlight and pull them all the way out at the front of the wheel.

Turn the vehicle back over and reconnect the right headlight ensuring the

cables underneath are laid in between studs.

Inhaltsverzeichnis

Andere Lightmybricks Spielzeug Handbücher

Lightmybricks

Lightmybricks LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT Bedienungsanleitung

Lightmybricks

Lightmybricks 10262 Bedienungsanleitung

Lightmybricks

Lightmybricks 21307 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Star Wars Darth Vader Castle 75251 Lighting... Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO HARRY POTTER HUNGARIAN HORNTAIL DRAGON Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO THE KNIGHT BUS Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Gingerbread House 10267 Lighting Kit Bedienungsanleitung

Lightmybricks

Lightmybricks 123 Sesame Street 21324 Light Kit Bedienungsanleitung

Lightmybricks

Lightmybricks 42056 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO 75304 Bedienungsanleitung

Lightmybricks

Lightmybricks 70657 Bedienungsanleitung

Lightmybricks

Lightmybricks 76178 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO 21054 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Star Wars Yoda 75255 Lighting Kit Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO TITANIC 10294 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO 40426 Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Disney Train Station 71044 Bedienungsanleitung

Lightmybricks

Lightmybricks Lego 10283 LIGHT KIT Bedienungsanleitung

Lightmybricks

Lightmybricks Volkswagen Beetle LED Lighting Kit Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO Winter Village Bakery 10216 Lighting... Bedienungsanleitung

Lightmybricks

Lightmybricks Ecto-1 & 2 LED Lighting Kit Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO GALAXY EXPLORER 10497 LIGHT KIT Bedienungsanleitung

Lightmybricks

Lightmybricks LEGO THE GUARDIANS' SHIP 76193 Bedienungsanleitung

Lightmybricks

Lightmybricks 10290 Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

Canon

Canon PAPER CRAFT Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Handbuch

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

Meccano

Meccano 15103 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung