Lightolier Soli ADA Series Bedienungsanleitung

Instruction Sheet Number IS:48021

Page For Assembly and Installation of Soli ADA Series Wall/Ceiling Mounted T-5 Fluorescent

Lightolier a Genlyte Thomas Companywww.lightolier.com

631 Airport Road, Fall River, MA 02720 (508) 679-8131 Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

A. FOR OCTAGONAL OUTLET BOX (J-BOX), GEM BOX OR

SWITCH OUTLET BOX MOUNTING

1. Pull supply wires from OUTLET BOX through hole in

MOUNTING PLATE (Fig.1). Secure MOUNTING PLATE to

OUTLET BOX using screws provided with OUTLET BOX.

2. Insert tabs from OUTLET BOX COVERS into slots on

MOUNTING PLATE to enclose OUTLET BOX.

3. Pull supply wires through center hole in BACK PLATE . Align

BACK PLATE and mark holes for DRYWALL ANCHORS

(supplied), screw DRYWALL ANCHORS into wall.

4. Secure BACKPLATE to MOUNTING PLATE and DRYWALL

ANCHORS using screws provided.

5. While supporting BALLAST HOUSING, Make electrical

connections: Black lead or lead without tracer marks to

hot (Black) supply lead; White lead or lead with tracer

marks to neutral (White) supply lead. Uninsulated wire is

a ground wire and must be connected to grounding

terminal or ground lead inside OUTLET BOX. Use WIRE

NUTS.

6. Carefully push connections back into the OUTLET BOX.

7. Align tabs at top of BALLAST HOUSING with slots on BACK

PLATE, snap in and push housing flush with wall.

CAUTION: MAKE CERTAIN THAT NO WIRES ARE

PINCHED BETWEEN MOUNTING PLATE AND FIXTURE

BODY.

8. Insert ALLEN HEAD SCREW (provided) into hole at bottom

of BALLAST HOUSING and fasten BALLAST HOUSING to

BACK PLATE (Fig. 1)

B. FOR DIFFUSER ATTACHMENT

Glass Diffuser: Secure DIFFUSER to BALLAST HOUSING

with Philips head glass mounting screws

(provided)

See Figs. 1 & 2.

Acrylic Diffuser:

1. Press PROTECTIVE BUSHINGS (supplied) through holes in

ACRYLIC DIFFUSER.

2. Proceed as above Glass Diffuser instructions.

NOTE: If fixture is to be mounted without DIFFUSER, insert

gray plastic push-in plugs (supplied) to cover glass mtg.holes in

BALLAST HOUSING.

C. FOR FRONT COVER ATTACHMENT

1. After inserting Lamp, Snap the FRONT COVER onto end caps

of BALLAST HOUSING (Fig. 1).

2. Insert ALLEN HEAD SCREWS into the holes at both ends of

the fixture to secure front cover to BALLAST HOUSING.

D. To remove glass / acrylic for cleaning

1. Remove FRONT COVER by unscrewing ALLEN HEAD

SCREWS at both end caps and unsnap FRONT COVER from

end caps.

2. Remove lamp by rotating 90 degrees and gently pulling it out of

the sockets.

3. Unfasten DUFFUSER (if used) from the BALLAST HOUSING.

Glass: clean with a small amount of glass cleaner on soft

cloth to remove hand oils and dirt.

Acrylic: clean with mild soap and water.

FOR ELECTRICAL CONDUIT MOUNTING- see diagram and

instructions on page two.

1 of 2

PROTECTIVE BUSHING

INSTALLATION FOR

ACRYLIC DIFFUSER

Read and understand these instructions before installing luminaire.

This luminaire is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance

with local codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity

at fuse box before proceeding.

Retain these instructions for maintenance reference.

Figure 2

Figure 1

Instruction Sheet Number IS:48021

Page For Assembly and Installation of Soli ADA Series Wall/Ceiling Mounted T-5 Fluorescent

Lightolier a Genlyte Thomas Companywww.lightolier.com

631 Airport Road, Fall River, MA 02720 (508) 679-8131 Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

2 of 2

E. ELECTRICAL CONDUIT MOUNTING ( Fig. 3 )

1. Insert electrical conduit connector through CONDUIT

PLATE (supplied) and secure with LOCK NUT (by

others).

2. Pull supply wires through center hole in BACK PLATE.

Align BACK PLATE and mark holes for DRYWALL

ANCHORS (supplied), screw DRYWALL ANCHORS

into wall.

3. Secure BACKPLATE to CONDUIT PLATE and

DRYWALL ANCHORS with screws provided.

4. While supporting BALLAST HOUSING, Make electrical

connections: Black lead or lead without tracer marks to

hot (Black) supply lead; White lead or lead with tracer

marks to neutral (White) supply lead. Uninsulated wire

is a ground wire and must be connected to grounding

terminal or ground lead. Use WIRE NUTS.

5. Carefully push connections back into the BALLAST

HOUSING.

6. Align tabs at top of BALLAST HOUSING with slots on

BACK PLATE, snap in and push housing flush with

wall.

CAUTION: MAKE CERTAIN THAT NO WIRES ARE

PINCHED BETWEEN BACK PLATE AND FIXTURE

BODY.

7. Insert ALLEN HEAD SCREW (provided) into hole at

bottom of BALLAST HOUSING and secure BALLAST

HOUSING to BACK PLATE.

For DIFFUSER & FRONT COVER attachment

proceed as per Sections B & C on first page of

these instructions.

F. 2-FOOT SOLI ELECTRICAL CONDUIT MOUNTING

Note: 2 foot version cannot be wired through the center

hole but must use one of the KNOCK OUT HOLES.

(Fig.4)

1. Insert electrical conduit connector through CONDUIT

PLATE (supplied) and secure with LOCK NUT (by

others).

2. Select KNOCK-OUT HOLE on BACK PLATE. Pull

supply wires through center hole in BACK PLATE.

Align BACK PLATE and mark holes for DRYWALL

ANCHORS (supplied), screw DRYWALL ANCHORS

into wall. Proceed as per items 3 through 7 above.

For DIFFUSER & FRONT COVER attachment

proceed as per Sections B & C on first page of

these instructions.

Figure 4

Figure 3

Dieses Handbuch passt für folgende Modelle

Andere Lightolier Leuchte Handbücher

Lightolier

Lightolier Brisa FB9314UDA Bedienungsanleitung

Lightolier

Lightolier Lytespan 22GR6 Bedienungsanleitung

Lightolier

Lightolier 12" PENDALYTE SERIES Bedienungsanleitung

Lightolier

Lightolier Lytecaster 1128 Bedienungsanleitung

Lightolier

Lightolier Lytespan 8655 Bedienungsanleitung

Lightolier

Lightolier Lytecaster 1004IC Bedienungsanleitung

Lightolier

Lightolier Lytespan 7178 Bedienungsanleitung

Lightolier

Lightolier WIRING OF AGILI-T FIXTURES Gebrauchsanweisung

Lightolier

Lightolier Calculite C6E17OHW Bedienungsanleitung

Lightolier

Lightolier Prismalyte Plus PRA1GRFVA232 Bedienungsanleitung

Lightolier

Lightolier Calculite ProSpec PB2T4 Bedienungsanleitung

Lightolier

Lightolier VTS2GPK3FT Bedienungsanleitung

Lightolier

Lightolier Lytecaster 1004F18ES Bedienungsanleitung

Lightolier

Lightolier V611 Bedienungsanleitung

Lightolier

Lightolier Lytecaster 1100FTUES Bedienungsanleitung

Lightolier

Lightolier Lytecaster 1100DAICM Bedienungsanleitung

Lightolier

Lightolier ProSpec 37224 Bedienungsanleitung

Lightolier

Lightolier Wal-Lyter WLRN244120SB Bedienungsanleitung

Lightolier

Lightolier Calculite ProSpec PB1A1175 Bedienungsanleitung

Lightolier

Lightolier ProSpec 26038 Bedienungsanleitung

Lightolier

Lightolier Calculite DR Bedienungsanleitung

Lightolier

Lightolier Lytecaster 1090 Bedienungsanleitung

Lightolier

Lightolier Lytecaster 1022 Bedienungsanleitung

Lightolier

Lightolier Lytecel LL4MF8LR254 Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

ArtFox

ArtFox Beam 15R extreme Bedienungsanleitung

GLG

GLG multispot 330 Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday TY052-1924-1 Bedienungsanleitung

SELF Electronics

SELF Electronics FLEX Bedienungsanleitung