Lightolier Silhouette T5 Bedienungsanleitung

Lighting Systems

Silhouette®

Combines T5 lamp technology with

one of the smallest luminaire proﬁles

in the industry.

Silhouette, an innovative linear lighting

system that incorporates the latest T5

lamp technology in a compact luminaire.

SA SB SC

The system includes both individ-

ual and joiner luminaires. When

the joiners are connected together

to create a continuous run the

suspension points are on 48" and

96" centers.

All ﬁxtures shown in this matrix

are individual luminaires.

SD SE SF

SG SH

SJ SK

Indirect (Page 4)

Indirect/Direct (Page 8)

Direct (Page 12)

Wall Mount (Page 14)

Lighting Systems

Silhouette – The System

Silhouette installed in continuous rows uses visually appealing and mechanically simple joiners forming hairline joints without visible fasteners.

(Luminaire pictured above shows an 8' joiner module joined with a 4' joiner module and power feed end set.)

Combining minimal scale with elegant shapes, the Silhouette

System offers an unparalleled number of design and light

configuration options. Easily adaptable, the linear lighting

system provides high quality illumination in a choice of ﬂexible

conﬁgurations, with a diminutive proﬁle that adds a new level

of style to interiors.

Silhouette features modular systems that join together to create

a variety of conﬁgurations and patterns. This allows the designer

maximum ﬂexibility in achieving an end result uniquely suited to a

space. The Silhouette System comes with three basic light distribu-

tion options – indirect, indirect/direct and direct.

The Silhouette System allows the designer a wide range of layout

options...whether it be straight runs, rectangles, nested patterns

or ladder conﬁgurations. The combination of minimal housing

dimensions and optical performance provides a level of design ﬂex-

ibility not attainable with many larger luminaires.

The slim dimensions of Silhouette are achieved by a compact extru-

sion which houses the T5 lamp. Precisely engineered reﬂectors

assure high efﬁciency and lighting design integrity. Factory pre-

wired modular sections with quick connectors allow fast and easy

adjustable mounting. Continuous rows and patterns have support

spacing of 48" and 96" allowing ease of installation. A single

screw, draw-tight joiner connection creates a hairline joint for a vir-

tually seamless appearance.

Individual End Detail

Individual luminaires, in 4 and 8 foot lengths, have

a ﬂush end cap where the extruded housing and

shielding are aligned at both ends.

Run End Detail

Joiner luminaires create continuous runs and patterns.

They have a continuous housing with shielding that is

spaced about an inch apart to create a unique look.

Profiles

Architectural

Round

Square

Recessed

Cove

Accent

Custom

Lightolier Lighting Systems

Lightolier Lighting Systems are modular linear lighting systems that offer a wide selection

of geometric shapes, architectural proﬁles, scales and ﬁnishes.

2 3

Perforated steel

and opal diffusers give

Luminaires SA and SB

luminous indirect

lighting. Luminaire SC

is a completely indirect

luminaire providing quality,

glare-free lighting.

Lighting Systems

SA Joiner

Run End Detail

SB Joiner

SC Joiner

4 5

Silhouette Indirect Series creates a soft,

evenly lit environment that’s

ideal for areas where

VDT tasks are

performed.

Silhouette – Indirect

1. Housing: Extruded

aluminum. Die-cast end

plate mechanically

attached with no

exposed fasteners.

2. Lamping: One T5 (28 or

54 watt as speciﬁed)

ﬂuorescent lamp.

Provided by others.

3. Reﬂector: Die-formed

specular aluminum

reﬂector.

4. Shielding: Die-formed

perforated CRS.

5. Diffuser: Translucent

acrylic diffuser.

Finish: Powder-coated

baked white or aluminum

enamel. Custom colors

available, consult factory.

Labels: UL, ULc and IBEW.

Electrical: Specify 120 volt

or 277 volt. Color-coded

quick connectors allow

ease of connection for

joiner modules. For special

circuiting, consult factory.

Ballast is class “P”,

thermally protected,

electronic, class “A” sound

rating, less than 10% THD,

end of lamp life cutoff.

Options & Accessories:

L, T, X, Inline joiner blocks

and emergency battery

pack available.

Luminaire Lengths:

Individual–49" and 97".

Joiner–48" and 96".

Indirect – SA, SB, SC

SA 1-Lamp T5 Luminous Indirect

SB 2-Lamp T5 Luminous Indirect

1. Housing: Extruded

aluminum. Die-cast

end plate mechanically

attached with no

exposed fasteners.

2. Lamping: Two T5 (28

or 54 watt as speciﬁed)

ﬂuorescent lamps.

Provided by others.

3. Reﬂector: Die-formed

specular aluminum

reﬂector.

4. Shielding: Die-formed

perforated CRS.

5. Diffuser: Translucent

acrylic diffuser.

Finish: Powder-coated

baked white or aluminum

enamel. Custom colors

available, consult factory.

Labels: UL, ULc and IBEW.

Electrical: Specify 120 volt

or 277 volt. Color-coded

quick connectors allow

ease of connection for

joiner modules. For special

circuiting, consult factory.

Ballast is class “P”,

thermally protected,

electronic, class “A” sound

rating, less than 10% THD,

end of lamp life cutoff.

Options & Accessories:

L, T, X, Inline joiner blocks

and emergency battery

pack available.

Luminaire Lengths:

Individual–46 3/4" and

94 3/4". Joiner–48" and 96".

SC 2-Lamp T5 Indirect

1. Housing: Extruded

aluminum. Die-cast

end plate mechanically

attached with no

exposed fasteners.

2. Lamping: Two T5 (28

or 54 watt as speciﬁed)

ﬂuorescent lamps.

Provided by others.

3. Reﬂector: Die-formed

specular aluminum

reﬂector.

4. Shielding: Die-formed

CRS.

Finish: Powder-coated

baked white or aluminum

enamel. Custom colors

available, consult factory.

Labels: UL, ULc and IBEW.

Electrical: Specify 120 volt

or 277 volt. Color-coded

quick connectors allow

ease of connection for

joiner modules. For special

circuiting, consult factory.

Ballast is class “P”,

thermally protected,

electronic, class “A” sound

rating, less than 10% THD,

end of lamp life cutoff.

Options & Accessories:

L, T, X, Inline joiner blocks

and emergency battery

pack available.

Luminaire Lengths:

Individual–48 1/2" and 97".

Joiner–48" and 96".

Lighting Systems

Coefﬁcients of

Utilization

% Wall Reﬂectance

70 50 30

080 80 80

172 69 65

266 60 55

360 52 47

454 46 40

550 41 34

645 36 30

742 32 26

838 29 23

936 26 20

10 33 24 18

80% Effective Ceiling

Cavity Reﬂectance

20% Floor Cavity

Reﬂectance

Room Cavity Ratio

81.7% efﬁciency

1 lamp F28T5

Report no. LRL299-1J

10% Direct

90% Indirect

Coefﬁcients of

Utilization

% Wall Reﬂectance

70 50 30

078 78 78

171 68 65

265 59 55

359 52 47

454 46 40

549 40 34

645 36 30

741 32 26

838 29 23

935 26 20

10 33 24 18

80% Effective Ceiling

Cavity Reﬂectance

20% Floor Cavity

Reﬂectance

Room Cavity Ratio

82.3% efﬁciency

2 lamp F28T5

Report No. LRL299-1D

0% Direct

100% Indirect

Coefﬁcients of

Utilization

% Wall Reﬂectance

70 50 30

079 79 79

172 68 65

265 60 55

360 52 47

454 46 40

550 41 34

645 36 30

742 32 26

838 29 23

936 26 20

10 33 24 18

80% Effective Ceiling

Cavity Reﬂectance

20% Floor Cavity

Reﬂectance

Room Cavity Ratio

82% efﬁciency

2 lamp F28T5

Report no. LRL299-1B

7% Direct

93% Indirect

2,000

700

500

400

200

FOOTCANDLE 20 30 50 70 100

1 2 3 4 5 7 10 20 30 40 50 70 100 200

ROOM AREA IN SQUARE FEET

NUMBER OF FIXTURES REQUIRED

300

1,000

100

3 5/8"

2 3/4"

5 3/4"

4 1/16"

5 5/8"

3 1/2"

1. Find room area on

vertical axis.

2. Move across chart to

footcandle curve.

3. Move down to hori-

zontal axis and read

number of luminaires

required.

2,000

700

500

400

200

FOOTCANDLE 20 30 50 70 100

1 2 3 4 5 7 10 20 30 40 50 70 100 200

ROOM AREA IN SQUARE FEET

NUMBER OF FIXTURES REQUIRED

300

1,000

100

1. Find room area on

vertical axis.

2. Move across chart to

footcandle curve.

3. Move down to hori-

zontal axis and read

number of luminaires

required.

2,000

700

500

400

200

FOOTCANDLE 20 30 50 70 100

1 2 3 4 5 7 10 20 30 40 50 70 100 200

ROOM AREA IN SQUARE FEET

NUMBER OF FIXTURES REQUIRED

300

1,000

100

1. Find room area on

vertical axis.

2. Move across chart to

footcandle curve.

3. Move down to hori-

zontal axis and read

number of luminaires

required.

Suspension

18", rows 10',

brightness

ratio 5.5:1

Suspension

18", rows 10',

brightness

ratio 4.3:1

90˚

85˚

95˚

105˚

75˚

65˚

55˚

115˚

125˚

180˚ 175˚ 165˚ 155˚ 145˚ 135˚

0˚ 5˚ 15˚ 25˚ 35˚ 45˚

750

600

450

300

150

90˚

0˚

90˚

85˚

95˚

105˚

75˚

65˚

55˚

115˚

125˚

180˚ 175˚ 165˚ 155˚ 145˚ 135˚

0˚ 5˚ 15˚ 25˚ 35˚ 45˚

1250

1000

750

500

250

90˚

0˚

90˚

85˚

95˚

105˚

75˚

65˚

55˚

115˚

125˚

180˚ 175˚ 165˚ 155˚ 145˚ 135˚

0˚ 5˚ 15˚ 25˚ 35˚ 45˚

750

500

1000

250

1250

90˚

0˚

How to Specify

Finish

Series SA White Aluminum

28 watt SA-28-WH SA-28-AL

54 watt SA-54-WH SA-54-AL

Please refer to the ﬂap at the back of the

brochure for complete ordering instructions.

How to Specify

Finish

Series SB White Aluminum

28 watt SB-28-WH SB-28-AL

54 watt SB-54-WH SB-54-AL

Please refer to the ﬂap at the back of the

brochure for complete ordering instructions.

How to Specify

Finish

Series SC White Aluminum

28 watt SC-28-WH SC-28-AL

54 watt SC-54-WH SC-54-AL

Please refer to the ﬂap at the back of the

brochure for complete ordering instructions.

6 7

Suspension

18", rows 10',

brightness

ratio 6.3:1

Silhouette – Indirect/Direct

Silhouette Indirect/Direct Series pro-

vides a combination of indirect and

direct lighting with high efﬁciency

and visual comfort. The series is

suited to spaces where both indirect

and direct lighting components are

desired. The pierced steel and opal

diffuser give Luminaire SD a visual

accent of 20% direct lighting while

providing all the beneﬁts of indirect

lighting. For applications that require

a higher degree of direct lighting,

Luminaire SE offers 29% direct light.

Opal acrylic combined with the small

extruded housing provides approxi-

mately 53% direct lighting in

Luminaire SF. Whichever indirect/

direct version you specify, you’ll be

impressed not only by the lighting,

but also by the beautiful way in

which the lighting

is delivered.

SE JoinerSD Joiner

SF Joiner

Lighting Systems

Run End Detail

1. Housing: Extruded

aluminum. Die-cast

end plate mechanically

attached with no

exposed fasteners.

2. Lamping: Two T5 (28 or

54 watt as speciﬁed)

ﬂuorescent lamps.

Provided by others.

3. Reﬂector: Die-formed

specular aluminum

reﬂector.

4. Shielding: Die-formed

pierced CRS.

5. Diffuser: Translucent

acrylic diffuser.

Finish: Powder-coated

baked white or aluminum

enamel. Custom colors

available, consult factory.

Labels: UL, ULc and IBEW.

Electrical: Specify 120 volt

or 277 volt. Color-coded

quick connectors allow

ease of connection for

joiner modules. For special

circuiting, consult factory.

Ballast is class “P”,

thermally protected,

electronic, class “A” sound

rating, less than 10% THD,

end of lamp life cutoff.

Options & Accessories:

L, T, X, Inline joiner blocks

and emergency battery

pack available.

Luminaire Lengths:

Individual–46 3/4" and

94 3/4". Joiner–48" and 96".

SD 2-Lamp T5 Pierced Indirect/Direct

SE 2-Lamp T5 Louvered Indirect/Direct

SF 2-Lamp T5 Acrylic Indirect/Direct

Indirect/Direct – SD, SE, SF

1. Housing: Extruded

aluminum. Die-cast

end plate mechanically

attached with no

exposed fasteners.

2. Lamping: Two T5 (28

or 54 watt as speciﬁed)

ﬂuorescent lamps.

Provided by others.

3. Reﬂector: Die-formed

specular aluminum

reﬂector.

4. Shielding: Die-formed

CRS.

5. Louver: Straight blade

louver ﬁnished to match

housing.

Finish: Powder-coated

baked white or aluminum

enamel. Custom colors

available, consult factory.

Labels: UL, ULc and IBEW.

Electrical: Specify 120 volt

or 277 volt. Color-coded

quick connectors allow

ease of connection for

joiner modules. For special

circuiting, consult factory.

Ballast is class “P”,

thermally protected,

electronic, class “A” sound

rating, less than 10% THD,

end of lamp life cutoff.

Options & Accessories:

L, T, X, Inline joiner blocks

and emergency battery

pack available.

Luminaire Lengths:

Individual–46 3/4" and

94 3/4". Joiner–48" and 96".

1. Housing: Extruded

aluminum. Die-cast

end plate mechanically

attached with no

exposed fasteners.

2. Lamping: Two T5 (28

or 54 watt as speciﬁed)

ﬂuorescent lamps.

Provided by others.

3. Shielding: Sandblasted

1/4" thick acrylic.

Finish: Powder-coated

baked white or aluminum

enamel. Custom colors

available, consult factory.

Labels: UL, ULc and IBEW.

Electrical: Specify 120 volt

or 277 volt. Color-coded

quick connectors allow

ease of connection for

joiner modules. For special

circuiting, consult factory.

Ballast is class “P”,

thermally protected,

electronic, class “A” sound

rating, less than 10% THD,

thermally protected, end

of lamp life cutoff.

Options & Accessories:

L, T, X, Inline joiner blocks

and emergency battery

pack available.

Luminaire Lengths:

Individual–46 3/4" and

94 3/4". Joiner–48" and 96".

Lighting Systems

Coefﬁcients of

Utilization

% Wall Reﬂectance

70 50 30

082 82 82

175 71 68

268 62 57

362 54 49

457 48 42

552 43 36

647 38 32

744 34 28

840 31 25

937 28 22

10 35 25 19

80% Effective Ceiling

Cavity Reﬂectance

20% Floor Cavity

Reﬂectance

Room Cavity Ratio

82.2% efﬁciency

2 lamp F28T5

Report No. LRL299-IF

20% Direct

80% Indirect

Coefﬁcients of

Utilization

% Wall Reﬂectance

70 50 30

096 96 96

187 82 78

279 72 66

372 63 56

466 55 48

560 49 42

655 44 37

751 40 32

847 36 28

944 32 25

10 40 29 22

80% Effective Ceiling

Cavity Reﬂectance

20% Floor Cavity

Reﬂectance

Room Cavity Ratio

89.5% efﬁciency

2 lamp F28T5

Report No. LRL299-IH

53% Direct

47% Indirect

Coefﬁcients of

Utilization

% Wall Reﬂectance

70 50 30

081 81 81

174 71 68

268 63 58

363 56 50

457 50 44

553 45 39

649 40 34

745 36 30

842 33 27

939 30 24

10 36 27 22

80% Effective Ceiling

Cavity Reﬂectance

20% Floor Cavity

Reﬂectance

Room Cavity Ratio

79.3% efﬁciency

2 lamp F28T5

Report no. LRL299-IE

29% Direct

71% Indirect

6 1/16"

2 1/4"

6 11/16"

4 1/4"

4 7/16"

2,000

700

500

400

200

FOOTCANDLE 20 30 50 70 100

1 2 3 4 5 7 10 20 30 40 50 70 100 200

ROOM AREA IN SQUARE FEET

NUMBER OF FIXTURES REQUIRED

300

1,000

100

1. Find room area on

vertical axis.

2. Move across chart to

footcandle curve.

3. Move down to hori-

zontal axis and read

number of luminaires

required.

Suspension

18", rows 10',

brightness

ratio 6.8:1

2,000

700

500

400

200

FOOTCANDLE 20 30 50 70 100

1 2 3 4 5 7 10 20 30 40 50 70 100 200

ROOM AREA IN SQUARE FEET

NUMBER OF FIXTURES REQUIRED

300

1,000

100

1. Find room area on

vertical axis.

2. Move across chart to

footcandle curve.

3. Move down to hori-

zontal axis and read

number of luminaires

required.

2,000

700

500

400

200

FOOTCANDLE 20 30 50 70 100

1 2 3 4 5 7 10 20 30 40 50 70 100 200

ROOM AREA IN SQUARE FEET

NUMBER OF FIXTURES REQUIRED

300

1,000

100

1. Find room area on

vertical axis.

2. Move across chart to

footcandle curve.

3. Move down to hori-

zontal axis and read

number of luminaires

required.

Suspension

18", rows 10',

brightness

ratio 3.3:1

90˚

85˚

95˚

105˚

75˚

65˚

55˚

115˚

125˚

180˚ 175˚ 165˚ 155˚ 145˚ 135˚

0˚ 5˚ 15˚ 25˚ 35˚ 45˚

500

250

750

500

1000

250

1250

1000

750

90˚

0˚

90˚

85˚

95˚

105˚

75˚

65˚

55˚

115˚

125˚

180˚ 175˚ 165˚ 155˚ 145˚ 135˚

0˚ 5˚ 15˚ 25˚ 35˚ 45˚

90˚

0˚

750

600

450

300

150

300

450

600

750

90˚

85˚

95˚

105˚

75˚

65˚

55˚

115˚

125˚

180˚ 175˚ 165˚ 155˚ 145˚ 135˚

0˚ 5˚ 15˚ 25˚ 35˚ 45˚

750

600

450

300

150

300

450

600

750

90˚

0˚

How to Specify

Finish

Series SD White Aluminum

28 watt SD-28-WH SD-28-AL

54 watt SD-54-WH SD-54-AL

Please refer to the ﬂap at the back of the

brochure for complete ordering instructions.

How to Specify

Finish

Series SE White Aluminum

28 watt SE-28-WH SE-28-AL

54 watt SE-54-WH SE-54-AL

Please refer to the ﬂap at the back of the

brochure for complete ordering instructions.

How to Specify

Finish

Series SF White Aluminum

28 watt SF-28-WH SF-28-AL

54 watt SF-54-WH SF-54-AL

Please refer to the ﬂap at the back of the

brochure for complete ordering instructions.

10 11

1. Housing: Extruded

aluminum. Die-cast

end plate mechani-

cally attached with no

exposed fasteners.

2. Lamping: One T5 (28

or 54 watt as speci-

ﬁed) ﬂuorescent lamp.

Provided by others.

3. Reﬂector: Die-formed

specular aluminum

reﬂector.

4. Shielding: Die-formed

perforated CRS.

5. Diffuser: Translucent

acrylic diffuser.

6. Louver: Straight blade

louver ﬁnished to

match housing.

Luminaire Lengths:

Individual–46 3/4" and

94 3/4". Joiner–48" and 96".

Lighting Systems

4 1/4"

2 3/4"

Coefﬁcients of

Utilization

% Wall Reﬂectance

70 50 30

063 63 63

158 55 53

254 50 46

350 45 41

446 40 36

543 36 32

640 33 29

737 30 26

834 28 23

932 25 21

10 29 22 18

80% Effective Ceiling

Cavity Reﬂectance

20% Floor Cavity

Reﬂectance

How to Specify

Finish

Series SG White Aluminum

28 watt SG-28-WH SG-28-AL

54 watt SG-54-WH SG-54-AL

Please refer to the ﬂap at the back of the

brochure for complete ordering instructions.

Room Cavity Ratio

55% efﬁciency

1 lamp F28T5

Report No. LRL299-1M

83% Direct

17% Indirect

2,000

700

500

400

200

FOOTCANDLE 20 30 50 70 100

1 2 3 4 5 7 10 20 30 40 50 70 100 200

ROOM AREA IN SQUARE FEET

NUMBER OF FIXTURES REQUIRED

300

1,000

100

1. Find room area on

vertical axis.

2. Move across chart to

footcandle curve.

3. Move down to hori-

zontal axis and read

number of luminaires

required.

SH 2-Lamp T5 Luminous Direct

5 3/4"

5 7/16"

SG 1-Lamp T5 Luminous Direct

90˚

85˚

95˚

105˚

75˚

65˚

55˚

115˚

125˚

180˚ 175˚ 165˚ 155˚ 145˚ 135˚

0˚ 5˚ 15˚ 25˚ 35˚ 45˚

500

750

250

1000

1250

250

90º

0º

Coefﬁcients of

Utilization

% Wall Reﬂectance

70 50 30

063 63 63

158 56 54

254 50 47

350 45 42

446 41 37

543 37 33

640 34 30

737 31 27

835 28 24

932 26 22

10 29 23 19

80% Effective Ceiling

Cavity Reﬂectance

20% Floor Cavity

Reﬂectance

Room Cavity Ratio

54.3% efﬁciency

2 lamp F28T5

Report No. LRL299-1C

85% Direct

15% Indirect

2,000

700

500

400

200

FOOTCANDLE 20 30 50 70 100

1 2 3 4 5 7 10 20 30 40 50 70 100 200

ROOM AREA IN SQUARE FEET

NUMBER OF FIXTURES REQUIRED

300

1,000

100

1. Find room area on

vertical axis.

2. Move across chart to

footcandle curve.

3. Move down to hori-

zontal axis and read

number of luminaires

required.

1. Housing: Extruded

aluminum. Die-cast

end plate mechani-

cally attached with no

exposed fasteners.

2. Lamping: Two T5 (28

or 54 watt as speci-

ﬁed) ﬂuorescent

lamps. Provided by

others.

3. Reﬂector: Die-formed

specular aluminum

reﬂector.

4. Shielding: Die-formed

perforated CRS.

5. Diffuser: Translucent

acrylic diffuser.

6. Louver: Straight blade

louver ﬁnished to

match housing.

Luminaire Lengths:

Individual–46 3/4" and

94 3/4". Joiner–48" and 96".

SH Joiner

SG Joiner

Softly glowing, well-shielded direct

lighting provides generous

illumination for task

environments.

Direct – SG, SH

Run End Detail

For complete speciﬁcations see

individual speciﬁcation sheets.

For complete speciﬁcations see

individual speciﬁcation sheets.

90˚

85˚

95˚

105˚

75˚

65˚

55˚

115˚

125˚

180˚ 175˚ 165˚ 155˚ 145˚ 135˚

0˚ 5˚ 15˚ 25˚ 35˚ 45˚

250

375

125

500

625

90˚

0˚

How to Specify

Finish

Series SH White Aluminum

28 watt SH-28-WH SH-28-AL

54 watt SH-54-WH SH-54-AL

Please refer to the ﬂap at the back of the

brochure for complete ordering instructions.

Available in one and

two lamp versions.

Silhouette Direct

functions well in

work spaces,

retail stores

or libraries.

Lighting Systems

1.Housing: Extruded

aluminum. Die-cast end

plate mechanically

attached with no

exposed fasteners.

2.Lamping: One T5 (28

or 54 watt as speciﬁed)

ﬂuorescent lamp.

Provided by others.

3.Reﬂector: Die-formed

specular aluminum

reﬂector.

4. Shielding: Die-formed

perforated CRS.

5. Diffuser: Translucent

acrylic diffuser.

Luminaire Lengths:

Individual–46 1/2" and

94 3/4". Joiner–48" and 96".

For complete speciﬁca-

tions see individual

speciﬁcation sheets.

2 3/4"

4 1/2"

Coefﬁcients of

Utilization

% Wall Reﬂectance

70 50 30

081 81 81

171 67 63

264 57 52

358 50 44

453 44 37

548 39 32

644 34 28

741 31 24

838 28 21

935 25 19

10 32 23 17

80% Effective Ceiling

Cavity Reﬂectance

20% Floor Cavity

Reﬂectance

Room Cavity Ratio

DISTANCE FROM WALL

DISTANCE ABOVE FIXTURE

0' 1' 2' 3' 4' 5'

87fc 65fc 37fc 22fc 15fc

2'6"

1'6 "

78fc

67fc

196fc

80% ceiling, 50% walls, 11' ceiling

Measurements in “footcandles”

SK 1-Lamp T5 Luminous Indirect

3 3/4"

3 3/8"

SJ 1-Lamp T5 Luminous Indirect

Coefﬁcients of

Utilization

% Wall Reﬂectance

70 50 30

081 81 81

174 70 67

267 61 57

361 54 48

456 47 41

551 42 35

647 37 31

743 33 27

840 30 24

937 27 21

10 34 25 19

80% Effective Ceiling

Cavity Reﬂectance

20% Floor Cavity

Reﬂectance

Room Cavity Ratio

0' 1' 2' 3' 4' 5'

97fc 78fc 54fc 35fc 23fc

101fc

89fc

120fc

DISTANCE FROM WALL

DISTANCE ABOVE FIXTURE

0' 1' 2' 3' 4' 5'

2'6"

1'6"

80% ceiling, 50% walls, 11' ceiling

Measurements in “footcandles”

1. Housing: Extruded

aluminum. Die-cast end

plate mechanically

attached with no

exposed fasteners.

2. Lamping: One T5 (28 or

54 watt as speciﬁed)

ﬂuorescent lamp.

Provided by others.

3. Reﬂector: Die-formed

specular aluminum

reﬂector.

4. Shielding: Die-formed

perforated CRS.

5. Diffuser: Translucent

acrylic diffuser.

Luminaire Lengths:

Individual–46 3/4" and

94 3/4". Joiner–48" and 96".

For complete speciﬁca-

tions see individual

speciﬁcation sheets

81.5% efﬁciency

1 lamp F28T5

Report No. LRL299-1K

17% Direct

83% Indirect

83.6% efﬁciency

1 lamp F28T5

Report No. LRL299-1L

9% Direct

91% Indirect

SK Joiner

SJ Joiner

Wall – SJ, SK

The Silhouette Wall Series is an

elegant solution for wall

mounted indirect lighting.

90˚

0˚

145

155

165

175

165

155

145

135

125

115

105

135

125

115

105

150

600

450

300

150

180˚

750

600

450

300

150

90˚

85˚

95˚

105˚

75˚

65˚

55˚

115˚

125˚

135˚ 145˚ 155˚ 165˚ 175˚ 180˚

45˚ 35˚ 25˚ 15˚ 5˚ 0˚

45˚ 0˚

How to Specify

Finish

Series SJ White Aluminum

28 watt SJ-28-WH SJ-28-AL

54 watt SJ-54-WH SJ-54-AL

Please refer to the ﬂap at the back of the

brochure for complete ordering instructions.

How to Specify

Finish

Series SK White Aluminum

28 watt SK-28-WH SK-28-AL

54 watt SK-54-WH SK-54-AL

Please refer to the ﬂap at the back of the

brochure for complete ordering instructions.

Run End Detail

High quality extruded

housing with perforated

steel shielding and acrylic

diffuser are available in

two distinct proﬁles.

Ordering Information

(under ﬂap)

Lighting Systems

Individual Luminaires

1. Order number of INDIVIDUAL

LUMINAIRES (luminaire comes

complete with mounting hardware,

end caps and power feeds).

Continuous Rows

1. Determine run length.

2. Order the appropriate number

of JOINER MODULES for the

complete run.

3. Order one POWER FEED

END SET per run.

4. Order one CABLE ASSEMBLY

per JOINER MODULE.

5. Maximum run length 88' based on

2-light, 54 watt, 120 volt luminaires.

Mountings

Cable suspension – 4 1/2" diameter ﬂat

canopy ﬁnished white enamel, 1/16" diameter

stainless steel aircraft cable adjustable up

to 36", Grip-Lock™with cable adjustment.

Power Feed End Sets

Cable

Assembly

aircraft cable

adjustable

up to 36":

SC36

How to order

Style Lamps Length Type Wattage Voltage Finish

Power Feed

End Set

SE36WH

(white)

SE36AL

(aluminum)

WH = White

enamel

AL = Aluminum

enamel

1= 120 volt

2= 277 volt

1= 1 T5 lamp

per 4'

section,

available

in SA, SC,

SJ & SK

2= 2 T5 lamps

per 4'

section,

available

in SB, SD,

SE, SF

& SH

4= 4 foot

8= 8 foot

S= Individual

J= Joiner

28 = 28 watt

54 = 54 watt

L Block

SL36WH

(white)

SL36AL

(aluminum)

X Block

SX36WH

(white)

SX36AL

(aluminum)

T Block

ST36WH

(white)

ST36AL

(aluminum)

Inline Block

SI36WH

(white)

SI36AL

(aluminum)

Joiner Blocks

Andere Handbücher für Silhouette T5

Inhaltsverzeichnis

Andere Lightolier Beleuchtungsausrüstung Handbücher

Lightolier

Lightolier CACS series Bedienungsanleitung

Lightolier

Lightolier Calculite C7CS-P38MH Bedienungsanleitung

Lightolier

Lightolier PLA2G9LP32U Bedienungsanleitung

Lightolier

Lightolier Lighting Systems EC2-11 Bedienungsanleitung

Lightolier

Lightolier Lytecel Linear LL4MF8LR154 Bedienungsanleitung

Lightolier

Lightolier DPB2S18DS340 Bedienungsanleitung

Lightolier

Lightolier QVF2SPFOS Bedienungsanleitung

Lightolier

Lightolier Lighting Systems EG2-4 Bedienungsanleitung

Lightolier

Lightolier Calculite Matrix 4X4PL Bedienungsanleitung

Lightolier

Lightolier Lighting Systems EC2-13 Bedienungsanleitung

Lightolier

Lightolier Lytespan 8107 Bedienungsanleitung

Lightolier

Lightolier 1002 Bedienungsanleitung

Lightolier

Lightolier QVS1GPFOS232 Bedienungsanleitung

Lightolier

Lightolier Lytespan 8292WE Bedienungsanleitung

Lightolier

Lightolier Lytecaster 406X Bedienungsanleitung

Lightolier

Lightolier Calculite C7E17OW Bedienungsanleitung

Lightolier

Lightolier Paraplus II PPH2G12FW232 Bedienungsanleitung

Lightolier

Lightolier Lytespan 8105 Bedienungsanleitung

Lightolier

Lightolier CCM-1 Bedienungsanleitung

Lightolier

Lightolier LSC-3 Bedienungsanleitung

Lightolier

Lightolier Lytecaster 2004ICV Bedienungsanleitung

Lightolier

Lightolier Lytecaster 1000LVE Bedienungsanleitung

Lightolier

Lightolier Lytespan 8277 Bedienungsanleitung

Lightolier

Lightolier CALCULITE EVOLUTION TRIMS Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung