Lincoln Electric P223 FLUX Bedienungsanleitung

P223 FLUX AWS A5.17-97: F7A4-EM12K and A5.23-97: F8A2-EA1-A2

Publication C5.10.1 12/03

www.lincolnelectric.com

Lincolnweld®P223 lux is an industry

standard or spiral pipe welding on

up to X80 grade pipe, especially

where good impact properties are

required. It is also well-suited or

longitudinal seam welding on pipe,

producing a low bead pro ile with

very straight edges, while minimizing

undercuts. Its ast reezing slag

makes it ideal or even small diame-

ter pipe. In most cases, the slag is

sel -peeling. For these same rea-

sons, P223 is an excellent choice or

many two-pass welding applications.

While designed or two-pass welding

applications, P223 is a neutral lux

which is also suitable or use in mul-

tiple pass welding with mild steel

and low alloy electrodes.

ADVANTAGE LINCOLN

• The weld deposits o neutral

P223 lux are extremely resistant

to procedural variations.

• Fast solidi ication o weld metal

and slag or excellent bead

appearance.

• Low dust levels make handling at

the work station clean and easy.

• Excellent weld pro iles with straight

and consistent weld bead edges.

• Fast reezing slag makes P223

suitable or smaller diameter pipe.

• Slag is sel -peeling on most appli-

cations.

• Designed to deliver Charpy

V-Notch impact properties that

exceed most line pipe require-

ments.

• Low di usible hydrogen levels.

• Manu actured under a quality

system certi ied to ISO 9001.

TYPICAL APPLICATIONS

• Oil and gas line pipe abrication

through X-80 grades.

• Single pass or multiple pass

welding.

• Single arc or multiple arc (up to

3 arc tandem welding).

• Straight seam or spiral seam

welding.

PRODUCT INFORMATION

• Basicity Index: 1.60

• Particle Size:

+12 Mesh 2% max.

-12/+100 Mesh 96% min.

-100 Mesh 2% max.

• Density: 1.3 g/cm3

CONFORMANCES

For Mild Steel:

Lincolnweld®L-61

AWS A5.17-97: F7A4-EM12K

ASME SFA-5.17

For Low Alloy Steel:

Lincolnweld®L-70

AWS A5.23-97: F8A2-EA1-A2

ASME SFA-5.23

RECOMMENDED ELECTRODES

Single Pass or Two-Pass Welds:

Lincolnweld®L-61, AWS EM12K

Lincolnweld®L-70, AWS EA1

(intended or applications requiring

robust Charpy impact properties).

Charpy V-Notch Charpy V-Notch Charpy V-Notch Charpy V-Notch

Flu /Wire ft•lbf (Joules) ft•lbf (Joules) ft•lbf (Joules) ft•lbf (Joules)

Combination @ 0ºF (-18ºC) @ -20ºF (-29ºC) @ -40ºF (-40ºC) @ -60ºF (-51ºC)

Actual Test Results 75 76 87 45

As-welded (101) (103) (117) (61)

P223/L-61

Actual Test Results 113 101 99 82

As-welded (153) (136) (134) (111)

P223/L-70

MECHANICAL PROPERTIES(1) –Two-pass seam weld on 0.688" wall X-65 pipe

AC/AC two-wire tandem arc procedure

(1)Mechanical property results obtained on single pass or two-pass welds will vary with base plate composition,

welding procedure, heat input, etc. These results are shown only to demonstrate the potential or the products

being used.

Tested on Pipe

Tested per AWS

Charpy V-Notch

Yield Strength Tensile Strength Elongation ft•lbf (Joules)

psi (MPa) psi (MPa) (%) @ -40ºF (-40ºC)

Requirements

P223/L-61 58,000 70,000-95,000 22 20

AWS F7A4-EM12K (400) (483-655) (27)

AWS A5.17-97 min. min. min.

As-welded

Actual Test Results 63,400 77,300 31 93

(437) (533) (126)

Requirements @ -20ºF (-29ºC)

P223/L-70 68,000 80,000-100,000 20 20

AWS F8A2-EA1-A2 (469) (552-689) (27)

AWS A5.23-97 min. min. min.

As-welded

Actual Test Results 79,800 93,900 25 39

(550) (647) (53)

MECHANICAL PROPERTIES – As Required per A S A5.17-97/A5.23-97

NOTE: The multiple pass procedure shown above is speci ied in AWS A5.17-97/AWS A5.23-97 and was employed

only or the purpose o AWS classi ication. The testing results and AWS classi ication shown should not be used to

determine the suitability o this lux/wire combination or service in limited pass applications. Actual procedural tests

should be conducted to veri y the mechanical properties obtained on these applications.

DEPOSIT COMPOSITION - As Required per A S A5.17-97/A5.23-97

%C %Mn %Si %S %P %Mo %Cu

Requirements

P223/L-61

AWS F7A4-EM12K Not Speci ied

AWS A5.17-97

Actual Test Results 0.08 1.38 0.43 0.003 0.011 — 0.06

Requirements

P223/L-70 0.12 1.40 .80 0.030 0.030 0.40-0.65 0.35

AWS F8A2-EA1-A2 max. max. max. max. max. max.

AWS A5.23-97

Actual Test Results 0.08 1.33 0.38 0.009 0.014 0.51 0.09

P223 FLUX AWS A5.17-97: F7A4-EM12K and A5.23-97: F8A2-EA1-A2

P223 Flux 12/03

www.lincolnelectric.com

[2]

P223 FLUX AWS A5.17-97: F7A4-EM12K and A5.23-97: F8A2-EA1-A2

P223 Flux 12/03

www.lincolnelectric.com

(mL/100g

weld deposit)

Requirements

AWS F7A4-EM12K Not Speci ied

Actual Test Results

P223/L-61 3.7

Requirements

AWS F8A2-EA1-A2 Not Speci ied

Actual Test Results

P223/L-70 4.2

DIFFUSIBLE HYDROGEN

- As Tested per AWS A4.3-93

Lincolnweld®50 lb. (23 kg)

Flu Paper Bag

P223 EDS30636

PACKAGING

Diameter Appro .

Polarity Wire Feed Arc Travel

CTWD(1) Speed Voltage Current Speed

Lead/Trail Spacing in/min (m/min) (volts) (amps) in/min (m/min)

Side 1

Lead Arc – P223/L-61 or L-70 90 (2.3) 35 920 41 (1.04)

5/32" (4.0 mm)

1-1/2" (38.1 mm)

5/8" (15.88 mm)

Trail Arc – P223/L-61 or L-70 50 (1.3) 36 640 41 (1.04)

5/32" (4.0 mm)

1-1/2" (38.1 mm)

5/8" (15.88 mm)

Side 2

Lead Arc – P223/L-61 or L-70 100 (2.5) 36 980 38 (.97)

5/32" (4.0 mm)

1-1/2" (38.1 mm)

5/8" (15.88 mm)

Trail Arc – P223/L-61 or L-70 48 (1.2) 41 620 38 (.97)

5/32" (4.0 mm)

1-1/2" (38.1 mm)

5/8" (15.88 mm)

(1) CTWD (Contact Tip to Work Distance). Subtract 1/4" to calculate Electrical Stickout.

[3]

TYPICAL OPERATING PROCEDURES – Two-run seam weld on 0.688" wall X-65 pipe AC/AC two-wire tandem

arc procedure. 0.25" centered land, 90˚ included angle each side, 5˚ push lead arc, 20˚ push angle trail arc.

THE LINCOLN ELECTRIC COMPANY

22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lin olnele tri . om

CUSTOMER ASSISTANCE POLICY

The business of The Lin oln Ele tri Company is manufa turing and selling high quality welding equipment, onsumables, and utting equipment. Our hallenge is to meet the

needs of our ustomers and to ex eed their expe tations. On o asion, pur hasers may ask Lin oln Ele tri for advi e or information about their use of our produ ts. We respond

to our ustomers based on the best information in our possession at that time. Lin oln Ele tri is not in a position to warrant or guarantee su h advi e, and assumes no liability,

with respe t to su h information or advi e. We expressly dis laim any warranty of any kind, in luding any warranty of fitness for any ustomer’s parti ular purpose, with respe t to

su h information or advi e. As a matter of pra ti al onsideration, we also annot assume any responsibility for updating or orre ting any su h information or advi e on e it has

been given, nor does the provision of information or advi e reate, expand or alter any warranty with respe t to the sale of our produ ts.

Lin oln Ele tri is a responsive manufa turer, but the sele tion and use of spe ifi produ ts sold by Lin oln Ele tri is solely within the ontrol of, and remains the sole responsibility

of the ustomer. Many variables beyond the ontrol of Lin oln Ele tri affe t the results obtained in applying these types of fabri ation methods and servi e requirements.

Subje t to Change – This information is a urate to the best of our knowledge at the time of printing. Please refer to www.lin olnele tri . om for any updated information.

TEST RESULTS

Test results for me hani al properties, deposit or ele trode omposition and diffusible hydrogen levels were obtained from a weld produ ed and tested a ording to pres ribed

standards, and should not be assumed to be the expe ted results in a parti ular appli ation or weldment. A tual results will vary depending on many fa tors, in luding, but not limited

to, weld pro edure, plate hemistry and temperature, weldment design and fabri ation methods. Users are autioned to onfirm by qualifi ation testing, or other appropriate means,

the suitability of any welding onsumable and pro edure before use in the intended appli ation.

P223 FLUX AWS A5.17-97: F7A4-EM12K and A5.23-97: F8A2-EA1-A2

Andere Lincoln Electric Schweißsystem Handbücher

Lincoln Electric

Lincoln Electric CV 425 Bedienungsanleitung

Lincoln Electric

Lincoln Electric LF 5D ADVANCED Bedienungsanleitung

Lincoln Electric

Lincoln Electric 11379 Bedienungsanleitung

Lincoln Electric

Lincoln Electric WELD-PAK 100 PLUS Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWERPLUS 1000HD Bedienungsanleitung

Lincoln Electric

Lincoln Electric handy core Bedienungsanleitung

Lincoln Electric

Lincoln Electric Idealarc 250 Bedienungsanleitung

Lincoln Electric

Lincoln Electric Eagle 10,000 Plus Bedienungsanleitung

Lincoln Electric

Lincoln Electric BESTER Magster 401 Bedienungsanleitung

Lincoln Electric

Lincoln Electric IDEALARC CV-400 Bedienungsanleitung

Lincoln Electric

Lincoln Electric FLEXTEC 450 CE Bedienungsanleitung

Lincoln Electric

Lincoln Electric outback 185 Bedienungsanleitung

Lincoln Electric

Lincoln Electric BULLDOG TM 140 IM10005 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWER ARC 5000 Bedienungsanleitung

Lincoln Electric

Lincoln Electric LINC FEED 33S Bedienungsanleitung

Lincoln Electric

Lincoln Electric COOL ARC 24 Bedienungsanleitung

Lincoln Electric

Lincoln Electric Invertec V205 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWER WAVE 345 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWER MIGTM 200 IM693 Bedienungsanleitung

Lincoln Electric

Lincoln Electric MAGNUM 200FM Bedienungsanleitung

Lincoln Electric

Lincoln Electric RANGER 250 Bedienungsanleitung

Lincoln Electric

Lincoln Electric CLASSIC 300 D PERKINS Bedienungsanleitung

Lincoln Electric

Lincoln Electric RANGER 305D AU Bedienungsanleitung

Lincoln Electric

Lincoln Electric K113 Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

ESAB

ESAB Buddy Arc 145 Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung

Everlast

Everlast POWER MTS 221STi Bedienungsanleitung

Kipor

Kipor KDE180XW Bedienungsanleitung

OrienTek

OrienTek T40 Bedienungsanleitung