SAFETY INSTRUCTIONS
General
This machine is equipped with various safety devices protecting both the operator
and the machine. Nevertheless, this cannot cover all safety aspects and therefore the
operator, before putting the machine into operation. Furthermore, the operator must
also take into account other aspects of danger relating to the surrounding conditions
and material.
Basic safety requirements
Before connecting the machine to the mains, make sure that all safety items are in their
active positions and check their functioning. If it is necessary to remove the doors or
protective covers, turn o the switch and disconnect the plug from its socket.
Kick-back catchers must be freely movable and their functioning must be checked regularly,
even several times a day.
Do not connect the machine to the mains while the door or protective cover is removed.
In order to avoid improper operation, get acquainted with the location of switches before
switching the machine on.
Remember the position (location) of the emergency stop switch so that you can use it
promptly at any time.
Be careful and do not touch any switches while the machine is being operated.
Do not touch any rotating tool by hands or with any other object under any circumstances.
In the case that you are not going to work on the machine, turn o the machine by the switch
and disconnect the plug from the supply socket.
Before cleaning the machine, switch o the machine and disconnect the plug of the machine.
Before doing any maintenance work inside the machine, switch o the machine and
disconnect the plug of the machine.
Do not alter the machine in any manner which might cause any risk to safety and operation.
If you have any doubts on the procedure, please contact a qualied professional for advice.
Do not neglect performance of regular inspections in accordance with the instructions for use.
Check and make sure that no disturbances occur on the machine caused by the user.
After the work is nished, adjust the machine so that it is ready for another series of operations.
Should a failure in power supply occur, switch o the machine immediately
Do not paint, Dirty, cause any damage to, alter or remove safety plates. If they become
illegible or lost, contact the manufacturer and replace the plates.
Keep work area clear. Cluttered areas and benches cause injuries.
Consider work area’s environment. Do not expose tools to rain. Do not use tools in damp or wet
location. Keep work area well lit. Do not use tools in the presence of ammable liquids or gases.
PG 4
