LINK-MI LM-TV02-4K2K Bedienungsanleitung

4K Video Wall Controller For 2 Displays

LM-TV02-4K2K

User manual

Catalog

1st.Installation Instructions …………… 2

2nd.Product Introduction ………………… 3

3rd.Machine Installed …………………… 4

4th.Remote control settings ………………… 6

5th.Chapter button settings ………………… 7

6th.FAQ ………………………………………… 8

1st. Installation Instructions

For your safety and equipment, please be sure to read the safety instructions carefully

before using this equipment.

If you are in doubt, please read the manual. It has a detailed description of the device

operation. If you still have any questions, please contact us and we will give you a

satisfactory reply as soon as possible.

There is no extra-notice if the specification is changed.

Equipment installation, please note the following:

1.1. Power supply

This device uses 12V/3A power adapter, power adapter support 100-240V AC voltage input,

in order to make the device can work normally, please do not use other power adapter.

1.2. Power off

When you need to move the equipment or other work that needs to be cut off power, turn

off all the power and unplug the power plug to ensure the safety of the equipment.

1.3. Cable

Can not be in power lines, signal lines, communication lines and other cables on the items,

should avoid the cable was trampled or squeezed to prevent leakage or short circuit and other

dangerous.

1.4. Signal line connection

When the device is inserted and pulled out, the equipment needs to be power off to avoid

damage to the equipment. Damage caused by live plug is not within the scope of warranty.

1.5. Cooling hole

The outer surface of the equipment may have a hole for heat dissipation, do not plug the

openings, so as not to heat accumulation, damage to equipment or cause fire hazards.

1.6. Equipment placement

Reasonable placement of equipment, such as the standard frame, chassis, cabinets, or

placed in a stable and smooth work table, to prevent the equipment fall.

1.7. The environment

Equipment working environment should pay attention to dust, moisture, especially to

prevent liquid immersion and splashing into the equipment.

1.8. Maintenance

All maintenance work should be done by professional maintenance personnel. In order to

prevent the risk of electric shock, do not open the cabinet.

2nd. Product Introduction

2.1 Overview :

LM-TV02-4K2K is a high-performance UHD Ultra HD 4K two displays mosaic, its main function

is to 1x2 Tiled display unit displays a 3840x1080@60HZ Super high definition images. Products

using advanced image processing technology, the input signal can support HDMI2.0, that is

3840x2160@60HZ, will not appear, even when playing fast animation no delay,no dropped frames.

Support 1 channel HDMI 2.0 、 1 channel mobile signal 、 1 channel DP 1.2 input,

Maximum resolution support 3840*2160@60Hz. 2 channel HDMI Signal output, the output

resolution is fixed to 1920*1080@60HZ.

Other more detailed feature descriptions, please refer to the product specifications.

2.2 Machine Pictures

2.3 Specification

3rd. Machine Installed

3.1 Open the package

Check host attachments. Include the host, the power cord, remote control, warranty card and

instructions.

3.2 Installation machine

3.2.1 TV sets:

LCD TV or other display device setting input signal to HDMI state. Display unit has

multiple HDMI input ports, make sure that connection splicer HDMI lines corresponding to the

port.

3.2.2 Stitching device connected to the display unit:

When in place of video mosaic, by HDMI Lines connect with the display unit, please note

that the display unit must correspond with the splicing processor is connected to the port.

Name

Spec

HDMI input

Interface

HDMI A type（HDMI2.0 support HDCP2.2）

Resolution

Up to 3840*2160@60Hz

mobile signal input

Interface

HDMI A type（HDMI1.4 support HDCP2.0 and mobile signal）

Resolution

Up to 3840*2160@30Hz

DP input

Interface

DP1.2

Resolution

Up to 3840*2160@60Hz

Audio output

Fit for output video

HDMI output

1920*1080@60Hz

Input Numbers

HDMI*1,mobile signal*1,DP*1

Output Numbers

HDMIx2

Controller

Remote,button

Power supply

DC 12V/3A

Operating Ambient Temperature

0℃~60℃

Storage Temperature

-20℃~70℃

Humidity

＜75%

Dimension

236mm(L)x140mm(W)x30mm(H)

2Display unit through HDMI Line connect 2 OUTPUT ports are connected as shown in the

following figure:

Display unit on the left side ------HDMI (On the right HDMI output Interface, as demonstrated

in)

Right display unit ---HDMI (On the left HDMI output Interface, as demonstrated in)

3.2.3 Input signal connections

Product support 1 channel HDMI 、 1 channel mobile signal 、 1 channel DP Input, all input

embedded audio input, users can access all the signals on demand, or access part of the signal,

interface functions and interface pictures are as follows:

mobile signal : Support HDMI1.4 Signal input, maximum support 3840x2160@30Hz HDMI Signal

input can be downward compatible; through a HDMI Lines can also be compatible with mobile

signal Output image output device, such as mobile signal Enabled mobile phones or Tablet.

HDMI : Support HDMI2.0 Signal input, enter the maximum resolution supported 3840x2160@60HZ.

DP Support maximum resolution support 3840x2160@60HZ.

3.2.4 Audio connection

A-OUT is audio output, can purchase an ordinary computer audio and A-OUT Connections.

3.2.5 Power on boot

After the above cable connection is ok, through the power adapter to the device input

12V DC power supply, the power led shows red, equipment in working condition.

4th. Remote control settings

Stitching device and the display unit are attached, connected to power the red power

light is on, the device works, by remote control or key makes it easy to set up your equipment,

or the chassis configuration.

4.1 Remote control settings:

4.1.1 Menu

Press MENU key,as show below:

4.1.2 Select submenu

Press the MENU key to select the different submenu, the submenu to stay red text, press

OK to enter the sub menu, select menu into the green text function can be set to the

corresponding sub menu.

4.1.3 Change product settings

After the submenu becomes green, change the product parameters or attributes by remote

control or key, press the return key to save the settings and exit the menu.

4.2 signal source selection

LM-TV02-4K2K signal source menu options are: automatic selection, D0: DP, D1:HDMI,

D2:mobile signal

4.2.1 automatic selection:

Through the remote submenu "source" set to "automatic selection", in the original

equipment without access to other signal source, can automatically identify the inserted

signal source and the signal source is automatically displayed in the splicing unit.

4.2.2 manual selection:

The utility model can be used for a single signal source or a plurality of signal sources

and is connected with the equipment at the same time.

4.3 Split mode

Through the submenu can choose a variety of splicing patterns, such as 1x2 or off mode,

as follows:

4.4 Board ID and flip function

By selecting the "ID card" after the ID, whether the image needs to be rotated 180 degrees

set in the menu "flip" two screen splicing device in 1x2 splicing mode of rotating ID 1,

need to output HDMI1 and HDMI2 on the road.

4.5 language

Remote control menu can choose: English, simplified Chinese, traditional Chinese three

different menu display language.

5th. Chapter button settings

Through the chassis key control functions and remote control to achieve the same

function, this section only explain the function of each button, as follows:

Menu/↓key: pop up the following main menu, press the Menu button repeatedly to stop

the cursor in different sub menus;

Select/→: modify the red submenu parameters;

Save/exit: to modify the parameters to save and exit the menu;

HDMI: all keys to the device HDMI port input signal source;

mobile: all keys to the device mobile signal port input signal source;

DP: all keys to the device DP port input signal source.

6th. FAQ

6.1 question: indicator light does not light?

Answer: please confirm whether the power supply is ok.

6.2 question: what is the meaning of the red light and the green light?

Answer: red light on behalf of the machine with electricity but no signal source, the green

light on behalf of the normal operation of the machine and the channel has a signal source

input.

6.3 question: display shows No signal or No cable?

A: first check whether the signal source is selected or the signal source is selected

automatically.

6.4 question: the above two screen 180 degree flip, how to install?

Answer: connected to the first block with the second screen HDMI signal socket should be

in accordance with the instructions of the normal order of reverse connection, and then enter

the menu to select the board ID is 1, then choose to flip.

6.5 question: output interface for the DVI display, can support?

Answer: HDMI and DVI although the data definition is consistent, but the agreement is

different, DVI display may not show.

Andere LINK-MI Controller Handbücher

LINK-MI

LINK-MI LM-TV04M Bedienungsanleitung

LINK-MI

LINK-MI LM-WPS41 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV08-4K2K Bedienungsanleitung

LINK-MI

LINK-MI LM-TV20 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV24 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV08 Bedienungsanleitung

LINK-MI

LINK-MI LM-MSW1 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV15 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV12 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV14 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV09-4K2K Bedienungsanleitung

LINK-MI

LINK-MI LM-TV04P Bedienungsanleitung

LINK-MI

LINK-MI LM-TV04-4K2K Bedienungsanleitung

LINK-MI

LINK-MI LM-TV16 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV25 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV18 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV04U Bedienungsanleitung

LINK-MI

LINK-MI LM-R90U Bedienungsanleitung

LINK-MI

LINK-MI LM-TV06 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV09 Bedienungsanleitung

LINK-MI

LINK-MI LM-TV04H Bedienungsanleitung

LINK-MI

LINK-MI LM-TV09S Bedienungsanleitung

LINK-MI

LINK-MI LM-TV12P Bedienungsanleitung

LINK-MI

LINK-MI LM-TV03-4K2K Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung