LINKIND LS28001 Bedienungsanleitung
1
Smart LED Solar Pathway Lights
User Manual
Scan the QR code
to watch the How-To
videos
2
PACKAGE CONTENTS
SPECIFICATION
A Lamp body
B Plastic Rod1
C Plastic Rod2
D Plastic Spike
E User Manual
*Note: If 2 Pack, content A-D will double,
If 4 Pack, content A-D will quadruple.
Housing material ABS
Induction mode Light control
+ Motion sensor
Detecting Angle 120°
Detecting Distance 8m/26ft
LED 36 LEDs
-10-40°CWorking temperature
Location Type Wet location
The solar path light can automatically detect the changes in the brightness of
the external environment. When the brightness is low enough, it will automati-
cally switch from energy-saving mode to lighting mode without motion detection
(Auto on at night / Auto off at sunrise).
INTRODUCTION
A 1PCS B 1PCS C 1PCS D 1PCS E 1PCS
14.3in
Φ5.11in
3
INSTALLATION
(1) Take out the lamp body, connect the rods and spike in different combinations
based on the height you need.
(2) Insert the assembled light into the ground vertically.
button switch
1.The default mode of the product is OFF mode. Press the button to adjust
modes when using the light.
OPERATION GUIDE
2. This product is not only solar powered but rechargeable with Type-C connection.
Please follow below steps to charge the light:
Pull out the rubber protective port cover, connect the light with your own Type-C
cable and adapter (both not included). The indicator will turn to orange while
charging and turn off when charged to the full. Then unplug the cable and fit tight
the rubber cover against water and dust.
Suitable Adapter Output: 5V, 500mA(or above)
Type-C
4
1. It is recommended to turn off the light and charge it under direct sunlight for
1-2 days before the first use. Make sure the product has enough power.
2. During the installation, please make sure the path light is installed
under direct sunlight where there is no shade or eave to shelter the solar panel.
Otherwise, the lighting time will be shorter.
3. Whether the solar path light can produce the best lighting
effect or not depends on sunlight intensity, geographical location, weather
conditions, seasons and other conditions.
WARM TIPS
Click the button to switch colors
Devices already connected to APP: Click the button to switch the following colors
- 6500K / RGB gradient / RGB breathing / red / yellow / green / cyan / blue /
magenta.
Devices in factory state (devices not connected to the APP): click the button to
switch the following colors - RGB gradient / 6500K flashes 2 times / RGB
gradient / RGB breathing / red / yellow / green / cyan / blue / magenta
LIGHTING MODES
APP Bluetooth mesh control:
1.The distance of AiDot APP to control Smart solar pathway lights is 30m/98ft in
open area.
2.After the smart pathway light is connected to the AiDot APP, the default
detection mode of the smart solar pathway light is motion detection (30s lighting
time). In the setting center of the smart solar pathway light, you can choose
Motion Detection or Luminance Detection according to your needs, and edit 2
detections of lighting time.
Pairing Tutorial & If the Solar Pathway Light is Offline from the App
1.Light up the lights, and keep your phone and lights no more than 98ft(in open
area) away, make sure your phone's Bluetooth is turned on.
2.Long press the red button of the 10s light until the solar pathway light enter the
color cycle and it is in pairing mood. After resetting, please re-add the light to
APP.
5
For more information , please visit www.linkind.com or contact our support
team.
Solar Path Light
Nearby
Manually
Brand
Lighting
Add Devices
If the light failed to turn on, please
a) check if there is any light source around;
b) charge the light for a while and then cover the solar panel to have a test;
c) make sure you hear a clear "click" sound when you press the button.
TROUBLE SHOOTING
Our goal is to bring you the best shopping
experience on Amazon. If you have any
questions about our product, please feel free
to contact us. Our customer service is right
here to resolve the case.
App Control
1. Scan the QR code below
to download the AiDot APP. Or search for“AiDot” in App Store or Google Play.
2. Create an account and sign in.
3. Press ‘+’ - “devices”, select Solar Path Light,
and follow the instructions in the app.
http://www.linkind.com
Why not share your stories
to help other buyers?
1877-770-5727
(Mon.- Fri.9 to 5 PST)
@linkind.lights
@linkindoicial
@linkindoicial
Inhaltsverzeichnis
Andere LINKIND Außenleuchte Handbücher
Beliebte Außenleuchte Handbücher anderer Marken
LIGMAN
LIGMAN BAMBOO 3 Bedienungsanleitung
Maretti
Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung
Maxim Lighting
Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung
urban ambiance
urban ambiance UQL1273 Bedienungsanleitung
TotalPond
TotalPond 52238 Bedienungsanleitung
Donner & Blitzen
Donner & Blitzen 0-02661479-2 Bedienungsanleitung