LINSHANG LS108A Bedienungsanleitung

Shenzhen Linshang Technology Co., Ltd.

9-7-2020 Page 1 of 6

LS108A/LS108D

Lens Transmission Meter

(2nd)

User Manual V9.0

Please read this manual carefully before using and reserve it for reference.

Note: Test hole diameter: LS108A is 1mm, LS108D is 0.5mm

Shenzhen Linshang Technology Co., Ltd.

9-7-2020 Page 2 of 6

I. Product Introduction

Lens transmission meter use infrared light sources of 850nm and 940nm and a visible light source of

550nm to illuminate the transparent material under test. The sensor detects the incident light intensity of

the three light sources and the light intensity after passing through the transparent material under test.

The ratio of the transmitted light intensity to the incident light intensity is the transmission, expressed as

a percentage.

II. Parameters

1. IR peak wavelength: 850nm and 940nm

2. VL peak wavelength: 550nm

3. Test hole diameter: ￠1mm/￠0.5 mm

4. Resolution: 0.1%

5. Measurement accuracy: ±2% (colorless and uniform transparent material，0-90% transmission)

6. Display:480*270 dot matrix color screen

7. Power input: DC5V/1A

8. Dimensions: 170mm ×180mm ×144mm (L*W*H)

9. Weight: about 1570g

III. Operation

1. Power on self-test

Power on: Plug in the power supply and ensure there is no test sample under testing. Short press the "

" button to turn on the meter. The boot interface displays the version number and serial number of the

meter and then enters into the measurement interface.

Power off: Short press the “ ” button to turn off the meter in the measurement interface; Long press

the “ ” button for 3s to turn off the meter in the setting interface.

2. Setup

Long press the “ ” button for 3s in the off state to enter into the Setup interface.

1) In the Setup interface, the " " button is used to confirm the setting; the "Operation" button is used

Shenzhen Linshang Technology Co., Ltd.

9-7-2020 Page 3 of 6

for selection.

2) Short press the "Operation" button to select the setting item:

A. Select "Language", short press " " button to enter the setting item you selected:

Short press the "Operation" button to select Chinese/English:

Select "Chinese": the measurement interface will switch to Chinese;

Select "English": the measurement interface will switch to English;

Short press " " button to confirm the setting and return to the Setup interface.

B. Select "Display Item"(Take the English as an example), short press " " button to enter the

setting item you selected. Short press the "Operation" button to select “850nm/550nm/940nm”,

“550nm/850nm”, ”550nm/940nm”.

Select “850nm/550nm/940nm”, the measurement interface displays the 850nm infrared

transmission, 550nm visible light transmittance, 940nm infrared transmission;

Select “550nm/850nm”, the measurement interface display 550nm visible light transmittance,

the 850nm infrared transmission;

Shenzhen Linshang Technology Co., Ltd.

9-7-2020 Page 4 of 6

Select “550nm/940nm”, the measurement interface display 550nm visible light transmittance,

the 940nm infrared transmission;

Short press the " " button to confirm the setting and return to select the setting item.

C. Select "Exit", short press the " " button to exit the setting mode and enters into the

measurement mode.

3. Measurement and operation

After powering on, the meter enters into the measurement interface, all transmission data is displayed as

100%. The test sample is placed on the test hole, the LCD screen displays the visible light of 550nm,

infrared light of 940nm and 850nm of the test sample;

As shown in the figure below: The infrared transmission of 850nm is 69.5%, the visible light

transmittance of 550nm is 18.6% and the infrared transmission of 940nm is 74.4%.

Shenzhen Linshang Technology Co., Ltd.

9-7-2020 Page 5 of 6

4. PC software counting statistics function

The meter has a USB interface and provide PC software to complete the functions such as the

inspection quantity counting, pass rate, pass and fail judgment during the production testing process. For

details, please refer to the PC software and software user manual in the attached U disk.

5. Abnormal voltage prompt

Voltage> 5.7V or <4.7V, the meter enters into the abnormal voltage interface. The meter automatically

turn off after 2s; when the interface prompt appears, please follow the prompts to replace the appropriate

power supply.

IV. Features

1. Brand new wavelength synthesis technology, measure transmission data of 3 wavelength

simultaneously.

2. Obtain the visible light transmission of 550nm, infrared light transmission of 850nm and 940nm at the

same time by aligning the test hole just once, which greatly improves the test efficiency.

3. The test hole has an alignment indicator LED, which is used to help the alignment of the tested lens

hole during the testing process.

4. Suitable for testing infrared transmission and visible light transmittance of mobile phone lens.

5. The meter has real-time dynamic self-calibration function, which automatically calibrates to 100%

transmittance after powering on.

6. Large LCD display. Three Chinese display interfaces or three English display interfaces can be

selected.

Shenzhen Linshang Technology Co., Ltd.

9-7-2020 Page 6 of 6

V. Notes

1. The meter is self-testing and self-calibrating when it is turned on. Please don’t place any test sample

in the test position, otherwise the self-calibration cannot be completed.

2. Avoid contact with corrosive materials and keep away from high temperature and high humidity

environment.

3. When there is no test sample, the display data occasionally cannot return to "100%". Just shut down

and restart the meter immediately for normal use，it does not affect the measurement accuracy.

4. When the meter is not in use, please turn it off.

5. When the interface displays abnormal voltage, please replace the power supply.

VI. Standard Packing List

No.

Description

Quantity

Unit

Lens Transmission Meter (2nd)

set

User manual

pcs

Certificate / warranty card

pcs

DC5V adapter

pcs

PC software U disk

pcs

USB extension cable

pcs

VII. Service

1. The meter has one-year warranty. If the meter works abnormally, please send the whole meter to the

company for maintenance.

2. Provide users with spare parts and lifelong maintenance services.

3. Provide the users with the meter inspection service for free.

4. Free technical support for long term.

Manufacturer: Shenzhen Linshang Technology Co., Ltd.

Website: www.linshangtech.com

Service hotline: 086-755-86263411

Email: sales21@linshangtech.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LINSHANG Messgerät Handbücher

LINSHANG

LINSHANG LS192 Bedienungsanleitung

LINSHANG

LINSHANG LS213 Bedienungsanleitung

LINSHANG

LINSHANG LS108A Bedienungsanleitung

LINSHANG

LINSHANG LS251D Bedienungsanleitung

LINSHANG

LINSHANG LS163 Bedienungsanleitung

LINSHANG

LINSHANG LS126C Bedienungsanleitung

LINSHANG

LINSHANG LS120 Bedienungsanleitung

LINSHANG

LINSHANG LS300 Bedienungsanleitung

LINSHANG

LINSHANG LS108H Bedienungsanleitung

LINSHANG

LINSHANG LS126A Bedienungsanleitung

LINSHANG

LINSHANG LS191 Bedienungsanleitung

LINSHANG

LINSHANG LS197 Bedienungsanleitung

LINSHANG

LINSHANG LS133 Bedienungsanleitung

LINSHANG

LINSHANG LS108 Bedienungsanleitung

LINSHANG

LINSHANG LS236 Bedienungsanleitung

LINSHANG

LINSHANG LS162A Bedienungsanleitung

LINSHANG

LINSHANG LS123 Bedienungsanleitung

LINSHANG

LINSHANG LS182 Bedienungsanleitung

LINSHANG

LINSHANG LS170 Bedienungsanleitung

LINSHANG

LINSHANG LS193 Bedienungsanleitung

LINSHANG

LINSHANG LS190 Bedienungsanleitung

LINSHANG

LINSHANG LS160A Bedienungsanleitung

LINSHANG

LINSHANG LS233 Bedienungsanleitung

LINSHANG

LINSHANG LS195 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung