3、Peak values, real-time values, and test curves can be displayed on the same
screen; enabling procedural monitor and reproduction of the test.
4、Free setting of fracture alarm value, fracture alarm dead zone, and
upper/lower offset; selection of fracture alarm, alarm for not excess of limit,
and alarm for excess of limit. When alarm values are exceeded, the buzzer
acts while the display shows alarm information. The two SC open-collector
level outputs drive the DC 12V relay or the solenoid to act, each output
being 50mA. To use output ports, connect the power adapter first.
5、Enable automatic unit conversion: N, kg, and lb; pressure unit MPa can be
converted as well.
6、Peaks can be held or cleared; clearing time can be set.
7、A maximum of 100 groups of test reports can be saved permanently. The
saved content includes test time, peak, and average valley. One group of test
curves can be saved(Automatically cleared after shutdown) as well for
reproducing the test procedure.
8、Material strength can be calculated based on sectional area input.
9、Shutdown and backlight can be set to perform automatically.
10、Chinese/English switchover; pictures and literary descriptions make various
operations easy to understand and learn.
11、Relying on the PC dedicated test software, the force gauge can realize
unlimited storage, transmission, and reproduction of test curve data.
12、Installed on different test benches, the force gauge can implement various
tests.
- 8 -
