Logik L4SCAN11 Bedienungsanleitung
Portable A4 Scanner
Instruction Manual
L4SCAN11
Contents
Unpacking...........................................................................................................3
System Requirements ........................................................................................4
Product Overview...............................................................................................5
Indicator Signaling.............................................................................................6
Stand Along (for scanning)................................................................................................6
USB Connect (for recharge battery only or read/copy le)............................................6
Installing and Charging Battery........................................................................7
Battery Status.........................................................................................................................7
Operation ............................................................................................................9
Select the Scan File Format ............................................................................................10
Scan an Original ..................................................................................................................11
Power o the Scanner.......................................................................................................12
Connecting to a Computer.............................................................................. 13
Connect the scanner to a computer............................................................................13
Disconnect the scanner from a computer.................................................................14
Arcsoft BizScanner .......................................................................................... 15
Install BizScanner................................................................................................................15
Run BizScanner....................................................................................................................17
Start to Use BizScanner.....................................................................................................18
Maintenance .................................................................................................... 24
Calibrating the scanner ....................................................................................................24
Cleaning the Sensor Glass ...............................................................................................25
Hints and Tips .................................................................................................. 26
Specications................................................................................................... 27
Safety Warnings............................................................................................... 28
3
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose it
please do so according to local regulations.
The following items are included:
Thank you for purchasing your new Logik Portable A4 Scanner.
These operating instructions will help you use it properly and safely.
We recommend that you spend some time reading this instruction manual
in order that you fully understand all the operational features it oers. You
will also nd some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Software Disc
P.N.: 2D1-PS003-D0161A
CIS Cleaning Swab
P.N.: 2AX-PS003-00001
Mains Adapter
P.N.: 060-CAP00-50513
Calibration Card
P.N.: 2P8-PS003-0001
USB Cable
P.N.: 052-USB0A-X0800
Lithium Battery
P.N.: 060-3450A-AGX10
Pouch
P.N.: 2P6-PS003-D0161
If items are missing, or damaged please contact Partmaster (UK
only). Tel: 0844 800 3456 for assistance.
Scanner
4
System Requirements
• Windows® XP / Vista™ / Windows® 7
Support Windows OS only.
• Pentium® IV 2.4 GHz or equivalent AMD Athlon®
• 512 MB DDR RAM or above
• 500MB free hard disk space
• 32-bit color display at 800x600 with DirectX 3D support
• DirectX 9.0c or above
5
Product Overview
6
7
8
9
10
3
1
2
4
5
1. Power Button
2. Custom Button
3. Battery Indicator
4. Function Indicator
5. Feeding Slot
6. SD Slot
7. USB Slot
8. PC Connection Port
9. Battery Cover
10. Roller Releaser
6
Indicator Signaling
Stand Along (for scanning)
Indicator Power LED 1
Battery
LED 2
Function Status
O O O Power O
On O Green Blink Power On Initial
On Green Orange Battery full and ready
for scan. The le format
is JPEG.
On Green Orange Blink Scanning
On Orange Green Battery is medium and
the le format is PDF.
On Red Red Blink Battery low and no SD
card (or lock) / ash disk
or paper jam.
USB Connect (for recharge battery only or read/copy le)
Indicator Power LED 1
Battery
LED 2
Function Status
O Red O Charging battery
O O O Battery fully charged
On Green Orange Battery full and can read
or copy le from PC or
Mac.
On Green Orange Blink Connecting with PC
The battery recharge only when the power is o only.
7
Use only the mains adapter provided for the base unit.
Installing and Charging Battery
1. Slide open the battery compartment cover.
2. Place the lithium battery as indicated. Follow the polarity indicated on the
scanner.
3. Slide the battery compartment cover back on.
4. Plug the mains adaptor to the scanner.
5. Plug the mains adaptor into the mains socket. Charge the scanner for 14
hours the rst time you charge it.
Battery Status
All the battery status will emit in the Battery Indicator.
Battery power indicator
When the scanner power is on:
• Greenlightindicate: Thebatteryisoffullcapacity
• Orangelightindicate: Thebatteryisofmediumcapacity.
• Redlightindicate: Thebatteryisoflowcapacity.
Charging Battery
When the battery power indicator is light red that mean the battery power
almost empty and need to recharge it.
1. Power o the scanner.
2. Connect scanner to PC USB ports or adaptor and the Battery Indicator
show the charge status as below :
• Redlightindicate: Chargingbattery.
• Blanklightindicate: Thebatteryhasfullycharged.
• The adaptor is for recharge only.
• Fully charged it before to use the scanner.
• Please don’t turn on or scan while battery is charging.
8
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or battery
leakage, which could cause personal injury or damage to property.
• Install the batteries correctly by following the polarity (+ and -) indications
in the battery compartment.
• Use only the types of the batteries which are indicated in this manual.
• Do not install new batteries with used ones and do not mix dierent types
of batteries.
• Do not dispose of the used batteries as domestic waste. Dispose of them in
accordance with local regulations.
9
The SD card is the high
priority when you insert
the SD card and ash disk
together.
USB
TO PC
USB
TO PC
SD
CARD
Operation
2. Press and hold the button for
about 0.5 seconds. The Function
Indicator green light blinks.
3. Wait until the Function Indicator
stops blinking then change to
orange and stays on to indicate
the scanner is ready.
1. Insert a memory card into the
memory card slot or a ash disk
into the ash disk slot.
Function Indicator
10
Select the Scan File Format
This scanner support JPG and PDF (B &W) scanned le formats.
1. The default format is JPG and the Function Indicator light orange.
2. Press the button and change the le format to PDF format. The Function
Indicator emit as green.
3. Press the button again and the le format change to JPG and the
indicator emit orange.
The Function Indicator emits patterns represent function status as follows:
Light Function Status
Green Blinks The scanner is power on and initiating.
Orange Steadily on The scanner is ready for use and the le format is JPG.
Green Steadily on The scanner is ready for use and the le format is PDF.
Orange /
Green Blinks
Continuously
• Initializing system and memory card. Please wait
until the initialization process is complete before
using the scanner.
• Busy scanning and storing image les. Please wait
until the process is complete before scanning
another original.
• Sensor cleaning in progress. Please wait until
the process is complete before performing any
operations.
Red Blinks • Paper jam. Press the Custom button for about 0.5
seconds; the scanner will back out the original so
you can remove it from the input slot.
• Memory card error. Remove the memory card to
clear this error status.
• Calibration failed. Error indication only.
No light The scanner is powered o.
Inhaltsverzeichnis
Andere Logik Scanner Handbücher
