Logik LDR V3 Bedienungsanleitung

User Guide

Digital TV Receiver

LDR V3

Important Information

Before using your new Digital TV Receiver, please take a minute to

read the following safety information:

Only use the supplied power supply.• Do not cut off the supplied power supply’s plug.• Do not allow the Digital TV Receiver to get wet.• Do not use the Digital TV Receiver in hot, humid or excessively• dusty places.

Do not place any objects on the Digital TV Receiver.• Allow for adequate ventilation around the Digital TV Receiver.• To clean the Digital TV Receiver, use a lightly dampened, soft cloth.• Do not use any kind of abrasive cloth, sponge or cleaner.

Do not attempt to open the Digital TV Receiver. Refer all servicing• to qualiﬁed service personnel.

To help prevent Screen Burn on Plasma and LCD screens, use the• Saver feature whenever possible.

This symbol on the product or in the instructions means that your

electrical and electronic equipment should be disposed at the end of its

life separately from your household waste. There are separate collection

systems for recycling in the EU.

For more information, please contact the local authority or your retailer

where you purchased the product.

Important Information ....................................................................... 2

Table of contents .............................................................................. 3

Package contents............................................................................. 4

Inserting batteries into the remote control........................................ 5

Attaching the supplied rubber feet.................................................... 5

Connecting to a TV with a SCART socket........................................ 6

Connecting to a TV without a SCART socket................................... 7

Automatically tuning ......................................................................... 8

Everyday use.................................................................................... 9

The remote control ......................................................................... 12

The front panel buttons................................................................... 14

Common on screen symbols.......................................................... 14

The Help pages.............................................................................. 15

The Channel List ............................................................................ 16

The Info display.............................................................................. 17

The TVGuide...........................................................................................................18

The Timers screen.......................................................................... 20

The Main Menu............................................................................... 22

Main Menu options......................................................................... 23

General problem solving................................................................. 26

Helpline details............................................................................... 27

Spares and accessories................................................................. 27

Product technical speciﬁcations ..................................................... 28

Important care and safety advice ................................................... 29

Notes.............................................................................................. 31

Table of contents

Package contents

1Digital TV Receiver 2Rubber Feet (2)

3Remote Control 4Batteries (2)

5Power Supply 6Quick Start Guide

7User Guide 8SCART Lead

9RF Lead

Inserting batteries into the remote control

Always check the positive/negative symbols on the batteries to• ensure they are inserted correctly.

Don’t forget to dispose of old batteries in an environmentally• friendly way.

Attaching the supplied rubber feet

Connecting to a TV with a SCART socket

1To your TV (supplied SCART lead).

2From your aerial.

3To your TV or VCR/DVD Recorder (supplied RF lead).

4To your VCR or DVD Recorder (SCART lead not supplied).

5To the mains power outlet (supplied power supply).

(Do not cut off the supplied power supply’s plug.)

Connecting to a TV without a SCART socket

1From your aerial.

2To your TV (supplied RF lead).

3To the mains power outlet (supplied power supply).

(Do not cut off the supplied power supply’s plug.)

You will now need to tune a spare channel on your TV. The

Digital TV Receiver automatically outputs a signal on RF

Channel 38.

If Channel 38 is already in use, or interference lines appear on the picture,

set the Digital TV Receiver’s “RF Output” option to a different RF Channel

(between channel 22 and channel 69) and retune your TV. Refer to page 24

for details on “RF Output”.

Automatically tuning

The ﬁrst time you switch on your Digital TV Receiver you will see a

screen like the one below:

Start up screen

Press the [OK] button on the remote control to begin automatic

tuning.

When the automatic tuning has ﬁnished, a summary screen, like the

one below, is displayed.

Automatic tuning summary screen

Press the [OK] button to remove the summary screen and start

watching digital TV.

Everyday use

Changing channels

Press [CH. U]or [CH. u]on the remote control to “hop” through the

channels.

To choose a particular channel

Press one of the [0-9] buttons, then press the [OK] button. If you do

not press the [OK] button, the Digital TV Receiver will change to the

selected channel after approximately 2 seconds.

To select 2 or 3 digit channels (10 to 999), press the required [0-9]

buttons in succession, then press the [OK] button. If you do not press

the [OK] button, the Digital TV Receiver will change to the selected

channel after approximately 2 seconds.

Channel hopping

The [ ] button lets you keep an eye on two channels by switching

between the current channel and the last channel you watched - so

you can hop between the channels.

Using standby

When you’re not watching TV, you should set the Digital TV Receiver

to standby. Press the [1]button to switch between ON (green

POWER light on) and STANDBY (red POWER light on).

If you plan to leave the Digital TV Receiver unattended for a long

period, put the Digital TV Receiver into standby and wait 20 seconds

Everyday use continued

before switching it off at the mains. (Don’t worry - all of your settings

will be saved.)

Automatic standby

Every day, at 3.30am, the Digital TV Receiver will automatically

switch to standby mode to help reduce the amount of electricity

it uses. If you are still watching TV at this time, a screen will be

displayed allowing you to stop the Digital TV Receiver entering

standby mode. It is also possible to deactivate this automatic

standby mode by setting the “Update Channels” option to “Off”. Refer

to page 24 for more details on the “Update Channels” option.

Standby retune

When the Digital TV Receiver is in standby mode it will automatically

search and add any new channels found to the channel list. In

some cases, existing channels may be removed (e.g. when you

are receiving your TV signal from 2 different transmitters). If this

happens, you can stop the Digital TV Receiver searching for new

channels in standby mode by setting the “Update Channels” option

to “Off”. Refer to page 24 for more details on the “Update Channels”

option.

Screen saver in radio mode

When you are listening to a radio channel, the screen saver will

automatically start if no button is pressed for 15 minutes. To remove

the screen saver, press any button on the remote control.

Inhaltsverzeichnis

Andere Logik Fernsehempfänger Handbücher

Logik

Logik LSTB665 Bedienungsanleitung

Beliebte Fernsehempfänger Handbücher anderer Marken

Edision

Edision Piccollino Bedienungsanleitung

Matsui

Matsui DTR1 Bedienungsanleitung

Dyon

Dyon Raptor Bedienungsanleitung

Strong

Strong SRT 2401 Betriebsanleitung

TerraTec

TerraTec CINERGY DT USB XS DIVERSITY Gebrauchsanweisung

Haier

Haier 34F9K Bedienungsanleitung

TechniSat

TechniSat DigiCom 1 Bedienungsanleitung

Haier

Haier LT19A1 Bedienungsanleitung

Triax

Triax CR 317 Bedienungsanleitung

DirecTV

DirecTV D10-300 Bedienungsanleitung

Motorola

Motorola VIP2502W Bedienungsanleitung

Motorola

Motorola VIP1200 Series Bedienungsanleitung

Xoro

Xoro HRT 1300 Bedienungsanleitung

Motorola

Motorola DH6200 Bedienungsanleitung

Manhattan

Manhattan Plaza DS-100 Bedienungsanleitung

Micro Prose

Micro Prose MPI-500 Bedienungsanleitung

TechniSat

TechniSat DIGIT ISIO S Gebrauchsanweisung

Rextor

Rextor 3488 Bedienungsanleitung