Lorell Value Series Bedienungsanleitung

Lateral File

Classeur latéral

Archivero lateral

LLR44521/44522

LLR44521/44522_071904 Page 1 of 27

Instructions:

IF YOU ARE MISSING PARTS OR OTHER CONCERNS PLEASE CALL OUR TOLL FREE

NUMBER: 1-888-436-6881 EXT. 7678

MONDAY - FRIDAY 9:00 AM TO 4:00 PM - EASTERN STANDARD TIME

Please provide the following information:

1. Full Name

2. Physical Address - do not include P.O. Box as our carriers cannot deliver to a P.O. Boxes

3. Phone Number

4. Model Number

5. Part Number

6. Quantity

7. Reason for the request

Note: Our policy is to send all parts requests normal ground transportation, if your requirements are to have these parts via

overnight/next day, please provide your designated carrier and account number.

Before you begin:

Open, identify and count all parts prior to assembly. Lay out the parts on a non-abrasive surface such

as carpet or blanket. You will need the tools identified below:

1. Phillips Head Screw Driver

2. Flat Head Screw Driver

3. Rubber Mallet (recommended)

4. Hammer

LLR44521/44522_071904 Page 2 of 27

HARDWARE IDENTIFICATION

LLR44521/44522_071904 Page 3 of 27

PANEL IDENTIFICATION

LLR44521/44522_071904 Page 4 of 27

ASSEMBLY INSTRUCTIONS

Step 1

With the Right Side Panel laying on a

non-abrasive surface insert with a Phillips

Screw Driver 6 each Cam Screw (1) in the

positions shown on the drawing.

In the positions shown on the drawing

insert 2 each Cam Lock (2). When

inserting the cam lock make sure that the

arrow is facing toward the cam screw

entry.

Place the Lock Bar (22) into the slot

provided. Note that the two pins located

on the one end of the Lock Bar (22) are to

at the top of the Right Side Panel (B).

With the Lock Bar (22) in place, attach 2

each File Drawer Suspension - Case Slide

(21) to the Right Side Panel (B) in the

position shown. Secure in place with 3

each M4X10 Screw (16) per slide. NOTE

SCREW POSITION PER DRAWING.

Attach 2 each Adjustable Foot (19) into

the base of the Right Side Panel (B).

Insert 2 each Wood Dowel (5) in the other

end of the Right Side Panel (B). Tap

securely into position with a Rubber

Mallet or Hammer.

Step 2

In the Bottom Panel (D), Front Panel (E)

and Back Panel (C) insert 15 each Cam

Lock (2) in the position shown on the

drawing. Note that on the Back Panel (C),

some of the Cam Locks (2) are located on

the opposite side on of the panel.

On the Front Panel (E), insert 2 each

Wood Dowel (5) in the hole position

shown on the drawing.

LLR44521/44522_071904 Page 5 of 27

Step 3

Attach the Back Panel (C) to the Right

Side Panel (B) so that 3 each Cam Screws

(1) located on the Right Side Panel (B)

engage with the Cam Locks (2). With a

Phillips Screw Driver rotate the cam locks

1/2 turn clockwise until snug. DO NOT

OVERTIGHTEN.

Attach the Bottom Panel (D) to the Right

Side Panel (B) in the position shown on

the drawing. Ensure that the 2 each Cam

Screws (1) properly engage with the Cam

Locks (2). With a Phillips Screw Driver

rotate the cam locks 1/2 turn clockwise

until snug. DO NOT OVERTIGHTEN.

Attach the Front Panel (E) to the Right

Side Panel (B) in the position shown on

the drawing. Ensure that the Wood Dowel

(5) securely seat into position and that the

Cam Screw (1) properly engage with the

Cam Lock (2). With a Phillips Screw

Driver rotate the cam lock 1/2 turn

clockwise until snug. DO NOT

OVERTIGHTEN.

Step 4

On the Left Side Panel (A) insert 6 each

Cam Screws (1) into the positions shown on

the drawing with a Phillips Screw Driver.

On the Left Side Panel (A) insert 2 each

Cam Locks (2) in the position shown on

the drawing. When inserting the cam lock,

make sure that the arrow is facing toward

the cam screw entry.

With a Phillips Screw Driver and 6 each

M4X10 Screw (16) install 2 each File

Drawer Suspension - Case Slide (21) to

the Left Side Panel (A) in the position

shown in the drawing. NOTE THE HOLE

LOCATION TO BE UTILIZED FOR

THE FIRST SCREW. In the Left Side

Panel (A) insert 2 each Adjustable Foot

(19) in the location shown on the drawing.

Insert by tapping lightly with a Rubber

Mallet or Hammer 2 each Wood Dowel

(5) into the top of the Left Side Panel (A)

as shown on the drawing.

LLR44521/44522_071904 Page 6 of 27

Drawer Side Panel

(Left Side View)

Drawer Side Panel

(Right Side View)

Step 5

Attach the Left Side Panel (A) to the

partially assembled unit containing the

Back Panel (C), Bottom Panel (D) and

Front Panel (E). Make sure that the Cam

Screws (1) located on the Left Side Panel

properly engage with the Cam Locks (B).

With a Phillips Screw Driver rotate the

cam lock 1/2 turn clockwise until snug.

DO NOT OVERTIGHTEN.

Step 6

On the 4 each Drawer Side Panel (I)

attach the File Drawer Suspension Drawer

Slide (20) using 3 each M4X10 Screw

(16) per slide. NOTE: TWO OF THE

SLIDES ARE LEFT SIDE ATTACHED

AND TWO NEED TO BE RIGHT

SIDE ATTACHED. SEE DRAWING

FOR POSITIONS.

NOTE DRAWING FOR INITIAL

SCREW PLACEMENT AS THIS

DETERMINES THE PROPER

ALIGNMENT OF THE SLIDE

On the 2 each Right Side Drawer Side

Panel (I) attach a Lock Clip (7) with 2

each M4X10 Screw (16) in the position

shown on the drawing.

LLR44521/44522_071904 Page 7 of 27

Step 7

Inserting the Drawer Bottom Panel (K) into the groove provided on the Drawer Front and Back Panel (J), attach

the left side Drawer Side Panel (I) as shown. Make sure that the Drawer Bottom Panel also fits securely into the

groove on this panel as well.

Secure in place with 6 each M4X40 Screw (4).

In the same manner, attach the right side (with lock clip) Drawer Side Panel (I) as shown and secure in place

with 6 each M4X40 Screw (4).

Repeat the above steps to make another drawer unit.

Attach the Upper Drawer Face Panel to the Drawer Front Panel with 4 each M6X21 Bolt (17) and Washer D16 (18).

Attach the Lock & Key Unit (6) with 2 each M4X10 Screw (16) by inserting the lock through the hole located

in the Upper Drawer Face Panel (G) so that the screw enters the back of the Upper Drawer Face Panel (G) and

only the lock cylinder is exposed on the outside of the panel.

On the second drawer attach the Lower Drawer Face Panel with 4 each M6X21 Bolt (17) and Washer D16 (18).

With both drawers closed test the Lock Unit (6) to make sure that both drawers are locked when the key is in

the locked position. Adjust the Lock Clip as necessary. If the top drawer is locking but not the bottom, make

sure that the Lock & Key Unit (6) is properly engaging with the Lock Bar (22). The Lock Bar (22) should move

vertically when the lock is rotated.

LLR44521/44522_071904 Page 8 of 27

Step 8

Using Pliers, screw the Innerlock

Eyehook (8) into the Back Panel (C) in

the hole located in the center of the panel.

Insert the completed Lower Drawer into

the cabinet ensuring that the File Drawer

Suspensions lock securely in place.

On the back of the Lower Drawer attach

the Innerlock Strip (9) with M4X26 Bolt

(12), Washer D12 (11) and Nut M4 (10).

Note the proper position of the washer in

the drawing.

Step 9

Insert the completed Upper Drawer into

the cabinet ensuring that the File Drawer

Suspension locks securely in place.

On the back of the Upper Drawer attach

the other end of the Innerlock Strip (9)

with a M4X26 Bolt (12), Washer D12 (11)

and Nut M4 (10). Note the proper position

of the washer in the drawing.

LLR44521/44522_071904 Page 9 of 27

Step 10

Roll out the Bottom Drawer and insert the

2 each Hangrail (13) onto the Drawer Side

Panel (I).

With the use of a Hanging File Folder,

attach the File Bracket (14) so that when

the File Support (15) is attached the

proper spacing to support the folder is

correct.

Repeat the above steps for the Top

Drawer.

Step 11

Insert 7 each Cam Screws into the Top

Panel (F) with a Phillips Screw Driver.

Install the Top Panel (F) onto the cabinet

so that the Cam Screws (1) and Wood

Dowels (5) properly engage with the Cam

Locks (2) and holes provided. With a

Phillips Head Screw Driver rotate the cam

locks on the back of the unit 1/2 turn

clockwise until snug. Open the top

drawer of the cabinet and rotate the two

cam locks 1/2 turn clockwise until snug.

DO NOT OVERTIGHTEN.

You have now successfully completed the assembly of this unit.

Thank you for your purchase!

Andere Handbücher für Value Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Lorell Inneneinrichtung Handbücher

Lorell

Lorell LLR84390 Bedienungsanleitung

Lorell

Lorell 59606 Bedienungsanleitung

Lorell

Lorell BOOKCASES Bedienungsanleitung

Lorell

Lorell 59647 Bedienungsanleitung

Lorell

Lorell Managerial Mid-Back Chair LLR86209 Bedienungsanleitung

Lorell

Lorell LLR68571 Bedienungsanleitung

Lorell

Lorell 69372 Bedienungsanleitung

Lorell

Lorell LLR54865 Bedienungsanleitung

Lorell

Lorell Value LLR60060 Bedienungsanleitung

Lorell

Lorell LLR44311 Bedienungsanleitung

Lorell

Lorell LLR68572 Bedienungsanleitung

Lorell

Lorell LLR50194 Bedienungsanleitung

Lorell

Lorell LLR34414 Bedienungsanleitung

Lorell

Lorell 59632 Bedienungsanleitung

Lorell

Lorell LLR49509 Bedienungsanleitung

Lorell

Lorell LLR69930 Bedienungsanleitung

Lorell

Lorell LLR47920 Bedienungsanleitung

Lorell

Lorell LLR86202 Bedienungsanleitung

Lorell

Lorell LLR25959 Bedienungsanleitung

Lorell

Lorell LLR60338 Bedienungsanleitung

Lorell

Lorell LLR68573 Bedienungsanleitung

Lorell

Lorell LLR99552 Bedienungsanleitung

Lorell

Lorell LLR20018 Bedienungsanleitung

Lorell

Lorell 87263 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung