Lorex LW2201AC1 Series Bedienungsanleitung

www.lorexcctv.com LW2201AC1 SERIES QSG_EN_R1 Page 1

CONTENTS:

Quick Start Guide

Digital Wireless Color

Camera with Stand

Wireless Antenna

for camera

Power Adaptor

for camera*

• Aim the Cameras to best optimize the viewing

area: Select a location for the camera that

provides a clear view of the area you want to

monitor, which is free from dust, and is not in

line-of-sight to a strong light source or direct

sunlight.

• Avoid installing the cameras where there are

thick walls, obstructions, or interference (i.e.

transformers, microwave ovens or other

electrical equipment) between the Cameras and

the Receiver.

• Select a location for the camera that has an

ambient temperature between 14°F~122°F

(-10°C~50°C)

• Before starting permanent installation, have

another person hold the camera for you while

you verify its performance by observing the

image on a monitor.

INSTALLING THE CAMERA

Before you install the camera, carefully plan where and how it will be

positioned, and where you will route the cable that connects the

camera to the power adaptor.

INSTALLATION WARNINGS

1. Carefully unpack the Camera.

2. Mount the stand to the wall:

• Mark the position of the

screw holes on the wall.

• Drill holes and insert the

drywall plugs as needed.

• Firmly attach the stand

to the wall using the

provided screws.

3. Attach the Antenna to the

Camera prior to mounting.

4. Place the camera in the

desired mounting position.

Tighten the thumbscrews

to secure the camera to the

Stand. Adjust the angle of

the camera until the

desired view is set.

*May not be exactly as shown

NOTE: AVOID INSTALLING IN A

LOCATION WHICH REQUIRES

THE WIRELESS SIGNAL TO PASS

THROUGH CEMENT, CONCRETE

AND METAL STRUCTURES. THIS

WILL REDUCE THE

TRANSMISSION RANGE.

Mounting

Screws

COLOR DIGITAL WIRELESS INDOOR/OUTDOOR

ACCESSORY CAMERA

LW2201AC1 SERIES - QUICK START GUIDE

www.lorexcctv.com LW2201AC1 SERIES QSG_EN_R1 Page 2

COLOR DIGITAL WIRELESS INDOOR/OUTDOOR

ACCESSORY CAMERA

LW2201AC1 SERIES - QUICK START GUIDE

CONNECTING CAMERA POWER ADAPTOR

Connect one end of the camera Power Adaptor to the camera and the other end to an electrical outlet.

It’s all on the Web

For detailed setup information,

please refer to your User’s Manual.

For additional information, please

visit our website

www.lorexcctv.com/support

1. Connect the power cable from the camera to the cable

from the Power Adaptor; plug the Power Adaptor into

an outlet or surge protector.

2. Press the Pair button repeatedly on the Wireless

Receiver to select an empty channel.

3. Press and hold the Pair button for 5 seconds to activate

pairing function. The on-screen displays informs you

that you have 30 seconds to press the pair button on

the camera*.

4. Press and hold the Yellow Pair button extending from

the camera. You must press the Yellow Pair button from

the camera within 30 seconds of pressing the Pair

button on the Wireless Receiver. If pairing is

successful, live video from the camera will immediately

appear on the monitor.

* These are instructions for pairing with the LW2201

receiver. To add this accessory camera to a different

Lorex Ultra Digital Wireless Receiver, check the

Owner’s manual for the receiver you have.

Pairing Button

ADDING THE ACCESSORY CAMERA TO YOUR SYSTEM

The Pairing Function assigns each camera to a different

channel on the wireless receiver (connect up to 4

Cameras), and is necessary for conﬁguring additional

cameras. By default the camera that came with the

LW2201 system is assigned to channel no. 1.

NOTE: It is highly recommended to pair the Accessory

Camera to the Receiver before permanently mounting the

camera. For detailed information, please check the

owners manual for the LW2201 system available at

www.lorexcctv.com

Connect power adaptor to

local 120V AC power outlet

Andere Lorex Sicherheitskamera Handbücher

Lorex

Lorex LNZ3522 Bedienungsanleitung

Lorex

Lorex LNC201 Bedienungsanleitung

Lorex

Lorex SG7550 Bedienungsanleitung

Lorex

Lorex VANTAGE CVC7660 Series Bedienungsanleitung

Lorex

Lorex mCAM DMC2030 Bedienungsanleitung

Lorex

Lorex Vantage CVC7707 Series Bedienungsanleitung

Lorex

Lorex SG7213P Bedienungsanleitung

Lorex

Lorex SG7555BP Bedienungsanleitung

Lorex

Lorex LW3211 SERIES Bedienungsanleitung

Lorex

Lorex LNZ4001 Bedienungsanleitung

Lorex

Lorex Vantage LNC116 Bedienungsanleitung

Lorex

Lorex H871T6D-4BA2 Bedienungsanleitung

Lorex

Lorex LKB383A Series Bedienungsanleitung

Lorex

Lorex L15LD420 SERIES Bedienungsanleitung

Lorex

Lorex W282CA Series Bedienungsanleitung

Lorex

Lorex SG6227 Bedienungsanleitung

Lorex

Lorex W461ASC Series Bedienungsanleitung

Lorex

Lorex SG6185W Bedienungsanleitung

Lorex

Lorex SG4934B Bedienungsanleitung

Lorex

Lorex CVC2274P Bedienungsanleitung

Lorex

Lorex LNW16XF Bedienungsanleitung

Lorex

Lorex LWB5800 Series Bedienungsanleitung

Lorex

Lorex CVC6999U Bedienungsanleitung

Lorex

Lorex CVC6941 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung