Lowrance XOG Bedienungsanleitung

Pub. 988-0160-461

Mapping GPS and Multimedia Player

Quick Start Guide

Power Cable

The Lowrance XOG™GPS operates on an internal rechargeable battery. Bat-

tery charge is probably low at time of purchase. The first time you use

XOG you should connect it to power. XOG can be powered in several ways:

•Cigarette lighter cable, using

12-volt vehicle power. Shown

at right.

•USB-PC cable, using power

supplied by personal com-

puter.

•Optional AC adaptor, using

120-volt AC household power.

Battery charge status is displayed

on the Main Menu. See page 6.

Power On and Off

To turn XOG on, press the power button on

the top of the unit. To turn off, press and hold

the button for three seconds.

To acknowledge the warning messages that

appear during startup, press the on-screen X

button that appears in the top right corner of

the display. Follow the on-screen instructions

to select your country and language.

Power

button

Lowrance XOG GPS, side views. Protective rubber covers are pulled

back to show details.

Registering XOG

When you connect XOG to a computer the first time, you can register

the unit at the on-line MapSelect store in order to purchase and

download additional maps.

XOG comes pre-loaded with turn-by-turn road maps to guide you while

driving. The MapSelect store provides additional content for your out-

SD card slot

Reset button

Headphone

socket

USB-to-PC/External

power socket

(mini-USB)

Left side Right side

door travels. You can also purchase pre-programmed maps on an SD

card from your Lowrance dealer.

To access the MapSelect store, you must

first insert an SD card in XOG's card

slot. When connected to a PC, XOG adds

a file to the card that automatically

sends your web browser to the MapSelect

store. If you prefer, you can manually

log-on at www.mapselect.com. You can also

log on manually after you register.

To connect XOG to a PC and register

online:

1. Insert an SD card in XOG's card slot.

2. Connect the USB-to-PC cable to a

USB port on your PC.

3. Connect the other end of this cable to

the mini-USB port on XOG.

4. Power XOG on as described above.

When using Microsoft®Windows®,

your PC will recognize XOG and as-

sign it a drive letter.

5. A Windows dialog box will ask if you

want to connect to the internet and

visit the Lowrance online map store. Click on this link to access the

MapSelect store and registration site.

6. Follow the on-screen prompts to register your XOG and set up a

MapSelect account. More information about the MapSelect store can

be found on-line using the Help function.

Menus and Main Functions

You can tap on-screen buttons or other menu items on XOG to quickly

access features. Most features are accessed from XOG's Main Menu.

To access the Main Menu, tap the on-screen MAIN MENU button.

XOG's map page control tools.

To access the cursor and Map Display Toolbar, tap anywhere on the

map page. With the cursor displayed, you can press and "drag" to pan

the map.

Map Display Toolbar

Overlay Data Hide

button

Map Orientation

button

Auto Zoom button

Speak button

Cursor

Main Menu button Location-POI

Information button

Main Menu.

Map button displays your current position on a moving

map, including information on your current route.

Music button lets you to choose the audio play list, ad-

just volume and set various music play controls.

Options button has three pages with settings that con-

trol operations and provide additional information.

Find button has three pages of search options designed

to help you find destinations quickly and easily.

Main Menu also contains power and battery indicators.

attach unit, engage bottom edge to

bottom of mount. Push back on unit

until it snaps into place.

A power plug symbol appears when external power is connected. It

flashes while the battery charges. Charging is complete when flashing

stops. Disconnect external power and a battery symbol appears. Four

green cells show a full battery. A single red cell warns that the battery

is low.

Mounting Instructions

The mount secures the unit to

glass or other smooth sur-

faces.

To attach the mount:

1. Press the suction cup against a

clean surface.

2. Push the locking lever to-

ward the base of the mount.

3. To remove it, disengage the

locking lever and pull on

the suction release tab.

4. To dismount XOG, push the release tab at top of unit up slightly.

Then, lift the unit forward and out of the bracket.

CAUTION

Do not leave the unit unattended on an automobile dashboard.

When the GPS is not in use, protect it from theft and heat by

storing it in an unobtrusive location away from direct sunlight.

In warm seasons the temperature can become hot enough to pre-

vent the GPS unit from operating. When the GPS is not in use

for an extended period of time we recommend bringing it indoors

and storing it at room temperature.

WARNING

When mounting a GPS unit in an automobile you must avoid

any installation that obscures instruments and controls or re-

stricts the driver's view through the windows. Avoid placing

the GPS where it could be propelled by an airbag. Some areas

may restrict mounting any electronic device in any location on

an automobile dash or windshield. Check local laws before us-

ing these mounts. Check the suction mount for adhesion each

time you use the unit and reinstall it. This is a portable mount-

ing device and the normal heating and cooling cycle of a car's

interior can loosen the seal. A loose seal could allow the unit to

fall or come loose during vehicle operations.

Determine Your Position Before Traveling

XOG must lock-on to multiple GPS satellites to determine your current

position and navigate. This requires a clear view of the sky, unob-

structed by structures or heavy foliage.

When you begin a trip, make sure XOG can "see" the sky and wait for it

to determine a position before you start driving or walking. A question

mark flashes over the current position arrow to indicate the unit has

not calculated its position.

XOG usually has good satellite reception through automobile windows.

Some windshields have heat reflective properties or defrosters that

block GPS signal reception. Consult your vehicle manufacturer to de-

termine if your car has this special glass installed. If so, you may need

to mount the unit near another window.

Map Page

The unit’s map page displays where you are as well as your surround-

ings.

A black arrow icon indicates your position on the map page. The map

displays the route with a magenta line, with colored dots at each turn.

Overlay data

boxes

Speak button

Black a

row icon

Map Orientation

button

Auto Zoom

button

Use the Speak button to control the volume level of spoken, turn-by-

turn instructions.

A black arrow icon represents your position on-screen. The arrow

always points in the direction you are traveling.

Use the Map Orientation button to toggle between three different

map views:

North Up always shows the map with North at the top of the screen.

Track Up rotates the map so that the direction you are traveling is al-

ways at the top of the screen. In Track Up, the button rotates to show

which way is North. 3D View displays the map from a position above

and slightly behind the black arrow icon.

Overlay Data boxes provide information about your route. Overlay

data appears in semi-transparent boxes on the map screen. The trans-

parency level of overlay data boxes can be controlled from the Interface

Options screen on Menu 2 in the Options feature.

Use the Auto Zoom button to toggle automatic zoom on and off. As

the map screen moves to track your position, Auto Zoom will enlarge

the map based on your speed and the distance to the next turn. For

manual zoom control, turn off Auto Zoom and launch the Map Display

Toolbar.

North Up Track U

3D View

Andere Handbücher für XOG

Inhaltsverzeichnis

Andere Lowrance GPS Handbücher

Lowrance

Lowrance iWAY 250C Bedienungsanleitung

Lowrance

Lowrance Lowrance IWAY 350C Bedienungsanleitung

Lowrance

Lowrance LCX-15 MT Bedienungsanleitung

Lowrance

Lowrance GlobalMap 4000M Abmessungen

Lowrance

Lowrance iFINDER GO Bedienungsanleitung

Lowrance

Lowrance LMS-522c iGPS Bedienungsanleitung

Lowrance

Lowrance GlobalMap 12 Bedienungsanleitung

Lowrance

Lowrance GlobalMap 4000M Bedienungsanleitung

Lowrance

Lowrance GlobalMap 4000M Bedienungsanleitung

Lowrance

Lowrance Endura Out&Back Bedienungsanleitung

Lowrance

Lowrance GlobalMap 7000C Bedienungsanleitung

Lowrance

Lowrance LGC-12S Bedienungsanleitung

Lowrance

Lowrance Endura Out&Back Bedienungsanleitung

Lowrance

Lowrance Lowrance IWAY 350C Bedienungsanleitung

Lowrance

Lowrance iWAY 100M Bedienungsanleitung

Lowrance

Lowrance GlobalMap 5200C Bedienungsanleitung

Lowrance

Lowrance HDS Gen3 Polaris Bedienungsanleitung

Lowrance

Lowrance AirMap 2000c Handbuch

Lowrance

Lowrance LCX-17M Bedienungsanleitung

Lowrance

Lowrance Lowrance IWAY 350C Bedienungsanleitung

Lowrance

Lowrance GlobalMap 5000C Bedienungsanleitung

Lowrance

Lowrance Mapping GPS & MP3 Player Bedienungsanleitung

Lowrance

Lowrance Point-1 Bedienungsanleitung

Lowrance

Lowrance HDS Live Bedienungsanleitung

Beliebte GPS Handbücher anderer Marken

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung

Garmin

Garmin GPSMAP 78 series Bedienungsanleitung