LR DM 80-S Bedienungsanleitung

OPERATING INSTRUCTIONS

Digital

Pressure Gauge

DM 80-S

- 2 - DM80-S_V1.1_0720

Manufacturer

LEITENBERGER GmbH, Bahnhofstraße 33

72138 Kirchentellinsfurt, Germany

Legal notice

This work is protected by copyright. All associated rights remain with LEITENBERGER GmbH.

Reproduction of the work or parts thereof is permitted only within the limits of the statutory provisions

of copyright law. Any modication, abridgement or translation of the work without the express written

consent of LEITENBERGER GmbH is prohibited. We reserve the right to make product changes with

respect to appearance, dimensions, weights, functionality, properties and performance in the course

of improvement and adaptation to the state of the art. No right to correction or subsequent delivery of

already delivered products is thereby implied. Deletions may be made at any time without any right to

a legal claim arising. All information on use and safety are non-binding. They do not replace any legal

provisions or regulations of the employers' liability insurance association. The brand names mentioned in

this document are the property of their respective owners.

translation of the original LEITENBERGER GmbH document.

Described product

- 3 -

DM80-S_V1.1_0720

Table of Contents

1. Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1 Safety notes and regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.2 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.3 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.4 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.5 Ambient conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2. Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.1 Geräteansicht, Tasten und Funktionen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.2 Delivery content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3. Prior to commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.1 Battery replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.2 Setting the measurement unit, attach stickers . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.3 Connect the digital pressure gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4. Handling instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.1 Care and storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.2 Environmentally friendly disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5. Technicaldata,specications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

- 4 - DM80-S_V1.1_0720

1. Safety

1.1 Safety notes and regulations

To ensure safe and reliable work with the digital pressure gauge and to protect the user from

injuries, the following points are to be observed:

- Read the operating instructions carefully.

- The digital pressure gauge may only be operated and installed in systems by

trained specialists who possess the necessary expertise and qualications

to perform these tasks, and who are familiar with the applicable standards,

regulations and requirements of the eld of application.

- The operating instructions are an integral part of the digital pressure gauge.

Store the operating instructions in a safe location so that you can quickly nd the

desired information if necessary.

- The legal provisions and regulations as well as those of the system/vehicle

manufacturer are generally to be observed.

- Prior to commissioning, perform a check to ensure that the digital pressure gauge

is in faultless condition. Do NOT operate the digital pressure gauge if damaged.

No technical modications to the digital pressure gauge may be made.

- Protection class according to DIN 60529: The ambient conditions at the place

of use must not exceed the requirements for the specied protection class (see

Technical data).

- Do not subject the digital pressure gauge to any extreme temperatures, direct

sunlight, extreme humidity or wet.

- Observe the measurement range limits and temperature ranges.

- Do not exceed the maxim measurement range limits and temperature ranges of

the digital pressure gauge at any time.

- The maximum pressure/load range of the system or component with the lowest

value is the decisive maximum value for the overall pressure/load range.

- Do not exceed the maximum pressure/load value of the smallest component of

the system at any time.

- Always observe the nominal pressure specications of the built-in measuring

connections and lines as well as the specied safety factors.

- Repairs to the digital pressure gauge may only be performed by the

manufacturer. Use only original spare parts and accessories.

- Non-specied use of the product or failure to observe the safety and operating

notes may lead to severe malfunctions as well as personal injury and property

damage.

- The discharge of media or hot liquids that are under pressure may cause injuries.

Pressurised systems may burst and cause parts to be ejected.

- Wear personal protective equipment, such as protective goggles, gloves, safety

shoes, etc. when working on pressurised systems and components.

- 5 -

DM80-S_V1.1_0720

1.2 Explanation of symbols

Warning notices and important information are marked in this document with symbols for better

identication.

The notices begin with signal words that indicate the extent of the danger. You must absolutely comply

with these notices and information and handle the device with care to prevent accidents and avoid

personal injury and property damage.

DANGER

Notice indicating a dangerous situation which, if not avoided, will result in death or severe

injury.

WARNING

Notice indicating a dangerous situation which, if not avoided, could result in death or severe

injury.

CAUTION

Notice indicating a dangerous situation which, if not avoided, could result in minor to

moderate injury.

Attention

Notice indicating a dangerous situation which, if not avoided, could result in property

damage.

Note

Notice including useful tips, recommendations and information for efcient and trouble-free

operation of the digital pressure gauge.

1.3 Intended use

The DM 80-S digital pressure gauge is used for the mobile and stationary measurement of pressures.

Warning

Danger from improper use.

Any improper use and failure to observe safety and operating notices can result in serious

malfunctions as well as personal injury and property damage.

– Only use the DM 80-S digital pressure gauge as intended.

– All information in the operating instructions and safety data sheets must be strictly complied with.

1.4 Disclaimer

Failure to comply with the intended use will immediately void any warranty and guarantee claims against

the manufacturer. No liability is accepted for damage or malfunctions caused by improper use, assembly

errors or failure to observe the operating instructions.

1.5 Ambient conditions

The DM 80 UMS digital pressure gauge is only intended for use in commercial workshops.

The climatic requirements correspond to the conditions typically prevailing in Central Europe. Optimum

function is ensured between -10 °C and +50 °C. The device must be stored within a temperature range

of -20 °C to + 50 °C.

The DM 80-S digital pressure gauge must be secured against falling down.

Rear panel

(battery compartment

and measuring unit)

see Point 3.1 / 3.2

⑤

③

④

- 6 - DM80-S_V1.1_0720

2. Product description

The DM 80-S is a digital pressure gauge with actual value display, MIN/MAX display and accuracy class

0.5 FSO and manually adjustable in the measuring units bar or PSI.

2.1 Device view, keys and functions

Display:

3½ digit display with backlight. Display of the measured values.

Pos. Designation Function

1 Actual value display Displays the actual value.

If the battery is too weak, the LOBAT indicator lights up

2 Sticker measurement unit Bar/PSI

3 ON/OFF button briey key press: switching device on/off

4 Rubber protective cap Protection against damage to the device

5 Pressure connection G1/4"

6 LOBAT display Appears when the battery is low

- 7 -

DM80-S_V1.1_0720

2.2 Delivery content

– 1 Pressure gauge

–2 Sticker (1 x Bar / 1 x PSI)

– 4 Rubber protective cap, blue

If the device displays "OFL" (overow), this means that the existing pressure is too high.

The device switches off automatically after 5 minutes if there is a maximum pressure change

of 2 % of the respective end value.

3. Prior to commissioning

Check scope of delivery.

To be able to start up the DM 80-S with the desired unit (bar/PSI), the unit must be opened and adjusted

by hand.

The pressure gauge is set to bar at delivery.

If necessary, check switch position for measuring unit before use. (point 3.2)

The batteries are included in the delivery condition and are not in the instrument.

The batteries must be inserted before use.

3.1 Battery replacement

– Switch the device off and push the rubber cap towards the rear over the housing.

–Open the rear side of the device: Loosen and remove the 3 screws (hexagon socket 2.5 mm), lift the

cover off.

–Replace the batteries. Pay attention to the polarity! Batteries 2 x 1.5 V (LR6 - AA).

The power supply cables are designed to be placed over the upper anchorage of the screw.

–Restore the original state.Then the corresponding unit label (bar/PSI) must be attached to the front

side next to the digital display. These stickers are included in the delivery.

The DM 80-S is now completely ready for use.

- 8 - DM80-S_V1.1_0720

3.2 Setting the measurement unit, attach stickers

– Open the back of the housing (see point 3.1)

– Set the measuring unit via the switch position

BAR: PSI:

Both switchs (1 and 2) Switch 1 to the lower position and

in the upper possition ON switch 2 in the upper possition ON

– Attach correct sticker with measuring unit to display

– Close rear side of housing (see point 3.1)

3.3 Connect the digital pressure gauge

CAUTION

Risk of injury due to leaking liquids or gases.

The discharge of media or hot liquids that are under pressure may cause injuries.

Risk of injury due to ejected parts.

Pressurised systems may burst and cause parts to be ejected.

Do not exceed the maximum pressure/load value of the smallest component of the system at

any time.

Never open pressurised ttings.

Wear personal protective equipment, such as protective goggles, gloves and safety shoes

when working on pressurised systems.

Attention

Follow the instructions and specications of the system manufacturer regarding the

tightening torques for ttings, adapters, etc.

Install the pressure gauge at the measuring point of the system. To do so, loosen or open the tting and

install the pressure gauge. Tighten ttings to the specied torque. Do not exceed the maximum torque of

the pressure gauge connection.

- 9 -

DM80-S_V1.1_0720

4. Handling instructions

4.1 Care and storage

To enable effective working, we designed the digital pressure gauge to be low maintenance. Never-

theless, you should still observe a few notes. This helps to ensure trouble-free operation and to preserve

the value of the technology.

Note:

Aggressive cleaning agents or solvents may damage the digital pressure gauge or individual

components.

Do not use aggressive or abrasive cleaning agents, solvents or similar chemicals for cleaning.

– Keep dust and dirt away from the digital pressure gauge.

– Clean the digital pressure gauge with a soft, slightly moistened cloth.

–Pay attention to the self-discharging of the battery. (We recommend charging the battery every 8

weeks).

– Battery warranty 6 months / device warranty 12 months.

– Store your product in a dry, dust-protected environment. Avoid places with higher temperatures and

moisture or places which can become wet, also for maintenance.

– Keep the original packaging to avoid damage during transportation.

4.2 Environmentally friendly disposal

Recycling according to WEEE (EU Directive 2002/96 EC)

You can optionally return the digital pressure gauge to us for disposal.

This digital pressure gauge or its components must not be disposed of as normal waste.

If you prefer not to return the digital pressure gauge to us for disposal, you are required to bring the

device to a specialised centre for the separate collection and disposal of hazardous and special waste.

The digital pressure gauge contains an electronic circuit board and a battery. These parts must be

removed before the device is scrapped.

- 10 - DM80-S_V1.1_0720

5. Technicaldata,specications

Feature Unit Measurement range / description

Pressure range - versions bar

0…+3

0…+4

0…+25

0…+60

-1…+3

-1…+16

Ambient temperature °C -10…+50

Storage temperature °C -20…+60

Media temperature °C -20…+120

Maximum relative humidity % r.F 85

Standard pressure connection - brass

Materials Membrane - Ceramics

Seal - H-NBR

Compensated range °C +10…+40

Error in compensated range % FS / °C ±0.02

Load cycles minimum -10 x 106

Power supply - 2 x 1,5 VDC LR6-AA

Max. battery life h 1500

Display bar/PSI LCD

Pressure connection - 1/4"

Weight g ca. 390

Diameter with rubber cap mm ca. 95…100

without rubber cap mm ca. 80

Inhaltsverzeichnis

Andere LR Messgerät Handbücher

LR DM 80-UMS Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung