Ltl Acorn Ltl-5210M Series Bedienungsanleitung

Ltl-6630M Series

1080P HD Video

Low Power Consumption Infrared Scouting Camera

Less Than 0.8S Trigger Time in Actual Application

USER’S MANUAL

TABLE OF CONTENTS

General Information.........................................................................................1

1.1 Features .....................................................................................................1

1.2 Application .................................................................................................2

1.3 Illustration...................................................................................................2

1.4 Keypad .......................................................................................................4

Getting Started .................................................................................................5

2.1 Load Batteries ...........................................................................................5

2.2 Insert SD Card...........................................................................................5

2.3 Enter Test Mode ........................................................................................6

2.4 Automatic Infrared Sensing Shooting..................................................... 7

ADVANCED SETTINGS....................................................................................8

3.1 Set up Parameters on Camera ...............................................................8

3.2 File Format...............................................................................................12

3.3 Set up Camera on PC ............................................................................ 12

LTL-6630 Series Products.............................................................................16

4.1 Ltl-6630 series model: ............................................................................16

IMPORTANT INFORMATION..........................................................................17

5.1 Power Supply ..........................................................................................17

5.2 Prevent From Short-Circuits ..................................................................17

5.3 SD Card ................................................................................................... 17

5.4 Auto Adjustment on Video Length......................................................... 17

5.5 850nm and 940nm IR LED ....................................................................18

5.6 Mount on Tripod ......................................................................................18

5.7 Low Battery Alert.....................................................................................18

Precautions.....................................................................................................19

6.1 Battery safety...........................................................................................19

6.2 Use Camera Outdoors ...........................................................................20

FIRMWARE UPGRADES................................................................................21

LIMITED WARRANTY.....................................................................................22

Appendix I: TECHNICAL SPECIFICATION ..................................................23

Appendix II: PACKAGE CONTENTS ............................................................25

Appendix III: Illustration of Battery Box Installation .................................26

Appendix IV: Place and Install Camera .......................................................28

Ver: Ltl-6630M-EN-001

General Information

This manual applies to model Ltl-6630M. The cameras use a high-end image

processor, work with a Japanese 14 megapixels BSI CMOS image sensor and a

130 degrees wide-angle lens (60 degrees lens models optional)that captures up

to FHD 1080P (1920X1080) 30fps HD video with audio and 30 megapixels

high-definition photos, the delicate and clear image offers users different visual

experience.

Low-power PIR sensors with features of high sensing accuracy and

sensitivity to avoid wrong shooting and missed shooting, as well as features of low

standby current and so on when working on the camera. The camera standby

current is about 80uA, far lower than 400 to 2000uA of other brands hunting

camera in the industry, which greatly extends the standby time.

The working principle of the camera is with its highly sensitive passive

infrared sensor (PIR) to sense the signal from animal or human, automatically

triggers to record photo, video. The rest of the time is in standby status, only the

PIR infrared sensing part is working, standby current is only about 80uA.

Please read the USER’S MANUAL in details before starting for better

understanding and operation.

1.1 Features

Picture resolution is up to 30MP.

Real high-definition video of 1080P / 720P / VGA with audio record,

H.264/AVC format.

2.0” TFT color LCD display, easy to set parameters, preview, replay

photos and video.

LTL-6630WMC with 130 degrees 7G high-quality wide-angle lens, can

greatly expands the shooting range(Ltl-6630MC uses 60 degrees lens).

Cam + Video mode enables camera to take both picture and video at

every trigger.

Burst shooting with 1 second interval.

Photo encryption function (need to upgrade software with encryption

function), the photos captured are automatically encrypted and only can

be viewed after decrypted by decryption software.

6 super bright 850nm or 940nm IR LED lights for great night vision.

Ultra-long standby time: more than 3 years with 6 18650 lithium

batteries.

Working temperature: -40℃~ +70℃.

Tight waterproof housing: IP68.

Patent technology of Low Power PIR Pyroelectric Infrared Sensor, the

camera detects animals in advance from wide scope in two stages, then

quickly trigger to shoot, standby current is about 80uA, makes it to be

the pioneer in the industry.

Quick trigger time (0.8 seconds). Two high accuracy timers make the

camera work in two specified periods as request.

Set an ID for the camera, the prefix of file name could be same as the ID,

makes it easy to classify the pictures from different place.

Picture stamp for rich information, shows shooting date, time, latitude

and longitude, temperature and month phase, etc.

Password protected to prevent unauthorized operation.

Optional memory overwrite function: delete the early pictures or videos

automatically to make room for new records.

Security box is optional for purchase.

Support to fix by tripod.

1.2 Application

Wildlife animal and plants observation

Security and surveillance

1.3 Illustration

Figure 1.1 shows the bottom view of the camera

Figure 1.2 shows the front view of the camera

Figure 1.3 shows the camera's battery compartment

Figure 1.2 Bottom View of the Camera

Camera interface: Type-C port, SD card slot, external DC power charging

port. Power/mode switch (switch inward: OFF mode, switch outward ON

External DC

Power in jack

SD card slot

Type -C socket

Power/Mode

switch

mode: boot working mode, press TEST key to enter TEST test mode or ON

auto record mode. )

Figure 1.1Front View of the Camera

•Figure 1.3 shows the camera's battery compartment

CAUTION: If the camera would not be used recently, it is recommended

to remove the batteries from the camera to avoid damage caused by

battery leakage, in which case the damage would void the warranty.

LED display

Keypad

Light Sensor

Mic

IR LED Light

Motion Indicator

Lens

Low Power

PIR Pyroelectric

Infrared Sensor

Lock Hole

Lock Buckle

Lock hole

Electrode contact

Battery

container

1.4 Keypad

Keypad

Function

Power mode

switch

OFF: power off. ON: automatic shooting. In the ON position,

press the TEST key to enter the boot preview test mode.

MENU key

Enter/exit menu.

TEST key

The TEST (test) mode and ON (auto record) mode can be

switched when the power switch is in the ON position.

Left key

Choose submenu setting item of menu (me nu mode). Long

press to zoom in the picture when previewing pictures(replay

mode)

Right key

Take photo (camera mode). Take video (video mode). Exit

enlargement of picture, play or stop recording video(replay

mode)

Up arrow key

Enter video mode (TEST mode). Move upward (menu/replay

mode). Long press to move picture upward, short press to

move picture leftward (when zoom in picture in replay mode).

Down arrow

key

Enter camera mode (TEST mode). Move downward

(menu/replay mode). Long press to move picture downward,

short press to move picture rightward (when zoom in picture in

replay mode). Set the brightness of night picture in

Camera mode.

OK key

Confirm. Enter/exit reply mode.

Working

indication

light

The red light flashes 5 times when the camera enters the ON

automatically shooting mode.

PIR

indication

light

In TEST mode, red and blue indication light will flash

accordingly when the internal left and right PIR detects the

animal.

Getting Started

2.1 Load Batteries

The battery box on the back of the camera can load 6 18650 lithium

batteries.

Please be aware that the battery polarity should correspond to

the mark on the battery box.

Please follow the positive and negative mark on battery box to

load 6x18650 lithium batteries.

Note: When using the battery case to power the camera, please be sure

to install 6 fully charged 18650 lithium batteries in the battery box.

The camera can use an external DC power supply of output current 2A,

12V~18V to charge the battery in the battery box. It is recommended to use

our company’s LTL-SUN-5.5W or LTL-SUN (built-in lithium battery) solar

charger(purchased separately) for long working time. The camera may work

in the field for more than 3 years without replacing battery.

2.2 Insert SD Card

It is recommended to use genuine 32GB Kingston SD card, other SD cards

are not guaranteed to be stable.

Unlock the lock buckles and you will see the SD card slot at the bottom of

the camera, insert SD card as below picture slightly into SD card slot, you

will hear the sound like “click” and the card insertion is finished. Please make

sure the SD card insertion direction is same with the sign aside the SD card

slot.

Insert SD card

The camera does not come with internal memory. It will not work

without a SD (Secure Digital) memory card or SDHC (High Capacity)

card. Before inserting the SD card, please make sure the write-protect

switch is at “OFF” side (NOT at the “LOCK” position), format the SD

card on camera before using.

2.3 Enter Test Mode

After load 6 fully charged 18650 lithium batteries, turn switch outward to ON

mode, close the camera unit with battery box and lock the buckles, when the

working indicator light is flashing, it will enter the ON mode by default for

automatic recording. Press the TEST button in ON mode, the camera screen

will display and enter the preview test mode. In this mode, you can operate

the camera by the buttons on camera operation panel, take photos and

record videos as an ordinary digital camera.

Note: Press the TEST button when the camera is in the ON mode, if it

does not enter the preview test mode immediately, it means that the

work in the ON mode is not completed and camera cannot enter the

test mode in time. Please press the TEST button 1~3 more times (press

once every 3 seconds) then you can enter the test mode normally. In

preview test mode, the camera will automatically enter the ON mode

auto-shooting status when there is no operation for 4 minutes.

Key: when switch is in ON position and camera in ON

automatic shooting mode, press once to switch to the preview

test mode. In the preview test mode, press once to switch to ON

auto-shooting mode.

Press to take video (move upward in menu or replay mode).

Press key to set the camera to take pictures (press down

arrow key in MENU or REPLY mode).Set the brightness of night

picture in Camera mode.

Press SHOT key to manually take picture or video and save

in SD card. Furthermore, press SHOT key to play or stop

playing video when replying.

Press REPLAY key to enter Replay mode (confirmation

function in menu mode). At this moment, press up and down

arrow key to turn page, left and right key to zoom in and restore

the picture.

Press key to enter menu, change parameters setting to

make the camera works as required. To change the camera

parameters, please refer to the Advanced Settings for better

operation.

In the Test mode, you can test the working area of the IR sensor,

especially the sensing angle and the sensing distance. Do the

following:

First please tie the camera to a tree with a strap and aim at the

area as needed.

Walk from one side to another side of the sensing area in front of

the camera,try different distance and angle.

If the indicator light flashes red when moving, it indicates that the

camera will record at your location.

After doing this test, you can find the best shooting position when you

install the camera. In general, we recommend placing the camera at a

height of 3 to 6 feet (1 to 2 meters) from the ground.

2.4 Automatic Infrared Sensing Shooting

After load 6 fully charged 18650 lithium batteries, turn switch outwards to

ON mode, close the camera unit with battery box and lock the buckles, when

the working indicator light is flashing,it enters the ON mode by default to

shoot automatically. After entering this mode, the red indicator light on the

front of the camera will flash 5 times, after the red light is off, the camera

enters the automatic shooting mode. When animal or other objects enter the

sensing range of the PIR, the camera will immediately start recording picture

or video.

Caution: To avoid potential false triggers due to temperature and

motion disturbances, please do not aim the camera at a heat source

(e.g.: the sun, heated stone or metal) or nearby tree branches and

twigs. The ideal direction to aim at is the north and the open place

without heat source.

ADVANCED SETTINGS

3.1 Set up Parameters on Camera

LTL ACORN hunting camera comes with default settings. Users can change

the setting parameters as required. After installing 6 fully charged 18650

lithium batteries in the camera, turn the switch outwards to the ON position,

close the camera unit with battery box and lock the buckles, press the TEST

button when the work indicator is flashing, the camera will enter the preview

after turning on, then you can start setting parameters.

Press MENU key to enter/exit the menu. Press , key to move marker

to select the menu to set, press , key to modify parameters, after the

modification, please must press key to save the changes, or the new

settings would not be saved.

Parameter

Settings

Description

Mode

Camera,

Video, Cam+Video

Select to take photo or video clips. In

Cam+Video mode, camera takes

photos first then video.

Format

Enter

All files will be deleted after

formatting the SD card. Highly

recommended to format the SD card

on the camera at the first using.

Caution: make sure the important

files on the SD card are backed up

before formatting.

Photo Size

30MP,14MP,

10MP, 3MP

Select desired resolution for photo

from 3 to 30 megapixels. Higher

resolution produces higher quality

photo, but occupies more space and

slightly affects the shooting interval.

Video Size

(1080P)1920x1080

(720P)1280x720

(VGA)640×480

Higher resolution produces better

quality of video, but occupies more

space of the SD card.

Set Clock

Setup

Press OK key to set up date and

time.

Andere Handbücher für Ltl-5210M Series

Inhaltsverzeichnis

Andere Ltl Acorn Scouting-Kamera Handbücher

Ltl Acorn

Ltl Acorn Ltl-6210M HD Video Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5210M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn L1l-5210M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn 5210A Bedienungsanleitung

Ltl Acorn

Ltl Acorn Mini30 Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6310M Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6511-4G Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl 5210A Bedienungsanleitung

Ltl Acorn

Ltl Acorn 5310A Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5510 MC Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl 5210 Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5310 Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5310 Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5610 Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5210M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6210MC Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6511-4G Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5210M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6210MC Bedienungsanleitung

Ltl Acorn

Ltl Acorn AG-680M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Acorn Ltl6210 Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl 5210A Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6310-3G Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5511 Series Bedienungsanleitung

Beliebte Scouting-Kamera Handbücher anderer Marken

Nestbox

Nestbox C13 Bedienungsanleitung

Wildview

Wildview STC-TGL1 Bedienungsanleitung

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Bedienungsanleitung

Suntek

Suntek HC-800M Bedienungsanleitung

Spypoint

Spypoint G4 Bedienungsanleitung

Duramaxx

Duramaxx 10029765 Bedienungsanleitung

Brecom

Brecom C2400 Bedienungsanleitung

BlazeVideo

BlazeVideo A280W Bedienungsanleitung

Bestok

Bestok 5210GM Bedienungsanleitung

GardePro

GardePro X60P Bedienungsanleitung

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Bedienungsanleitung

PNI

PNI HUNTING 280C Bedienungsanleitung

Muddy

Muddy Pro-Cam 14 Bedienungsanleitung

Bresser

Bresser 3310006 Bedienungsanleitung

Recon Outdoors

Recon Outdoors HS410 Bedienungsanleitung

Braun

Braun 57660 Bedienungsanleitung

Wildgame

Wildgame Shadow Bedienungsanleitung

Spypoint

Spypoint FLEX Bedienungsanleitung