Lucent Technologies INDeX 20AT Bedienungsanleitung
Contents
INDeX 20AT Telephone User's Guide 38DHB0002UKDU - Issue 1 February 2000
Introduction...........................................................................................3
20AT Features .......................................................................................6
INDeX Features .....................................................................................8
Making Calls........................................................................................10
Speed Dials, PIN's & Account Codes................................................12
Busy or Unanswered ..........................................................................14
Answering Calls..................................................................................16
Transfer, Park & Hold Calls................................................................18
Diverting Calls.....................................................................................20
Other Features ....................................................................................22
Voice Manager.....................................................................................24
Good Phone Usage.............................................................................26
Index.....................................................................................................27
Contents
Using this Guide – Page 3
38DHB0002UKDU - Issue 1 February 2000 INDeX 20AT Telephone User's Guide
Introduction
Using this GuideThis guide covers the INDeX 20AT telephone. The 20AT is
an analogue telephone for use on standard telephone lines
and on PBX analogue extensions of the INDeX System.
Lamp
Further Help
"Why don't you do
something to help me?"
Stan Laurel 1947.
This guide is also available in several computer formats
(eg. Windows Help, Adobe Acrobat)
. Contact your System
Manager to obtain copies or download them from the
Lucent Technologies at
http://www.sdxplc.com
.
Connecting the 20AT
The 20AT can be connected to most analogue telephone
sockets. If connected to a socket on a private telephone
system check with your System Manager that the socket is
suitable for analogue phones.
– Connect the handset lead to the socket marked
H/SET on the base of the 20AT.
– Connect the phone lead from wall socket to the socket
marked LINE on the base of the 20AT.
Page 4 - Introduction
INDeX 20AT Telephone User's Guide 38DHB0002UKDU - Issue 1 February 2000
MF & Time Break Recall operation
The 20AT uses MF signalling and TB recall signalling only.
Contact your telephone line provider if unsure of the type
of signalling you should be using.
During a call, phones can use a recall signal to indicate to
the exchange that they are about to send more digits.
REN Values To ring properly when a call arrives all phones draw a
small current from the telephone line. All telephone
devices have a REN value, a measure of how many
'current units' they need to ring properly.
Most telephone lines can provide ringing current for a total
REN of 4. If the total REN of all the devices on the line
exceeds that value, then some of the devices may not ring
when calls arrive.
If it is necessary to connect more devices to a line than it
can support, equipment exists that can increase the total
REN provided by the line. Contact your line provider for
details.
–The 20AT has a REN of 1. It can share the same
telephone line as other telephone devices so long as
the total REN does not exceed that of the line (usually
4).
INDeX standard telephone sockets provide a REN of 2.
20AT Approvals – Page 5
38DHB0002UKDU - Issue 1 February 2000 INDeX 20AT Telephone User's Guide
20AT Approvals The apparatus is approved for connection to the PSTN or
suitable PBX supporting DTMF signalling.
The 20AT has been approved for use of the following
facilities:
– DTMF signalling.
– Mute.
– Dual level receive volume control.
Any other usage will invalidate the approval of the
apparatus if as a result it then ceases to comply with the
standards against which the approval was granted.
This apparatus is capable of 999/112 calls to the
emergency services.
Page 6 - 20AT Features
INDeX 20AT Telephone User's Guide 38DHB0002UKDU - Issue 1 February 2000
20AT Features
Redial Last Number
Pressing the REDIAL key dials out the number of the last
manually dialled call.
Changing the Caller Volume
During a call, pressing the VOLUME changes the caller
volume between normal and loud.
Message Waiting Lamp
The 20AT has a message waiting lamp. On systems that
support message waiting, the lamp will flash when a
message has been left. The method for answering the
message and clearing the lamp will vary according to the
system that left the message.
For the INDeX system:
To answer a message waiting lamp:
1. Lift the handset and dial *1. The system rings the
extension that left the message.
To cancel a message waiting lamp:
1. Lift the handset and dial *2. Replace the handset.
The Memory KeyThe 20AT's MEMORY key can store a single number for
quick dialling (ie. lift the handset and press MEMORY).
The number can be up to 21 digits.
Setting the memory number
1. Lift the handset off-hook.
2. Press MUTE and then MEMORY.
3. Dial the number to store.
4. Press MUTE again and replace the handset.
Recall Some telephone systems require a recall signal to initiate
special functions (refer to your System Administrator for
details). Press RECALL to send this signal.
Mute – Page 7
38DHB0002UKDU - Issue 1 February 2000 INDeX 20AT Telephone User's Guide
Mute During a call, press MUTE to stop the caller from hearing
you without ending the call. Press MUTE again to
reconnect the caller.
Changing the Ringer
You can alter the volume and ring of the 20AT's ringer.
1. Lift the handset off-hook.
2. Press MUTE and then #.
3. Press a key between 0and 9.
–1: Quiet tone ring.
–2: Tone ring.
–3: Loud tone ring.
–4: Quiet normal ring.
–5: Normal ring.
–6: Loud normal ring
(the default setting)
.
–7: Quiet rapid ring.
–8: Rapid ring.
–9: Loud rapid ring.
–0: No Ring
(this setting is temporary until the 20AT is
next used, then it returns to its previous setting)
.
4. Press MUTE again and replace the handset.
Stored Numbers The 20AT can store 10 numbers for rapid dialling. Each
number can be up to 21 digits in length. (Also see page 12
for Storing Personal Speed Dials numbers on the INDeX
system.)
Dialling a stored number
1. Lift the handset off-hook.
2. Press STORE and then the associated store number of
the number to dial (0to 9).
Setting a stored number
1. Lift the handset off-hook.
2. Press MUTE and then STORE.
3. Select the store number to use (0to 9).
4. Dial the number to be stored.
(Prefix 9 for external users).
5. Press MUTE again and replace the handset.
Page 8 - INDeX Features
INDeX 20AT Telephone User's Guide 38DHB0002UKDU - Issue 1 February 2000
INDeX Features
Introduction When used on an INDeX telephone system, the 20AT has
access to a wide range of system features. This section of
the guide covers those features. The 20AT telephone
should only be used in the phone sockets indicated by
your System Manager. It will not work in the sockets used
by INDeX 20DS, 20CC, 2010 and 2030/50/60 phones (and
vice versa).
–Network Features
Your phone system may be part of a network linking
several sites. Wherever possible, it treats network calls
as internal calls and offers the same features. However,
this depends on the type of network link and also the
type of system at the other end of the link (ie. some
links may be to non-INDeX telephone systems).
Dialling Timeout After you start dialling, if you do not dial another digit for
several seconds the system assumes that you have
finished dialling. The system then ignores any further digits
that you dial. By default the timeout is 5 seconds, although
this varies between sites.
Since it is your phone that generates the audible dialling
tones, the system's dialling timeout does not affect calls
connected through the system to services that need to
hear additional MF tones (eg. Voice mail systems, BT star
services, etc).
Telephone Tones & Ringing – Page 9
38DHB0002UKDU - Issue 1 February 2000 INDeX 20AT Telephone User's Guide
Telephone Tones & Ringing
The INDeX 20AT uses various tones and ringing to
indicate calls and other events.
Incoming Calls:
– Repeated Double Ring: External call.
– Repeated Single Ring: Internal call.
During Calls:
–Repeated Single Pip: Another extension is about to
intrude or has intruded on your call.
Outgoing Calls:
–Continuous Tone: Number called unobtainable or set
to no calls. Phone locked, no external calls (or phone is
barred).
–Repeated Tone: Busy number.
–Dial Tone: Dial number.
–Repeated Single Pip: Phone on divert or no calls.
Night Service The system can take different areas into and out of night
service automatically. It does this following timetables
setup by the System Manager. The effects of night service
vary, but typically they are as follows:
–Lines: The system directs calls to a night desk number
or answer phone extension.
–Phones: The type of calls you can make becomes
more restricted, eg. no international or long distance
calls.
Page 10 - Making Calls
INDeX 20AT Telephone User's Guide 38DHB0002UKDU - Issue 1 February 2000
Making Calls
Notes on Making Calls
Your phone allows very simple and quick dialling to make
calls. To simplify dialling further, the INDEX system can
store several hundred speed dials for use by any
extension. It can also store personal speed dials for your
own frequently needed numbers.
–Call Barring
On external calls, the INDeX system may bar you from
dialling particular numbers or types of numbers (e.g.
national, international). Typically, call barring increases
when the system puts the phone's area into night
service. Call barring can also change according to time,
date and day of the week. As the call barring settings
vary for each site, this guide cannot fully detail their
effect.
Making External Calls
"E.T. phone home"
Steven Spielberg 1982.
Redial - Alias:
- Last number redial
- Saved number redial.
The method below uses normal dialling to make external
calls. The system may apply call barring to some or all
external numbers. You can also lock your phone by wrong
passcode entry
(see page 22)
.
To dial an external call:
1. Lift the handset and dial 9
(Your System Manager will
inform you if you need to dial a different number)
.
2. If you hear a repeated single pip, the system requires a
PIN code or account code before allowing an external
call
(see page 12)
.
3. Dial the telephone number.
4. During the call you can hold or transfer it
(see page 18)
.
5. To end the call replace the handset.
To redial last external number used:
1. Lift the handset and dial # to repeat the last external
number used (including speed dials).
Inhaltsverzeichnis
Andere Lucent Technologies Telefon Handbücher
Lucent Technologies
Lucent Technologies Definity 8434DX Bedienungsanleitung
Lucent Technologies
Lucent Technologies Definity Callmaster II Bedienungsanleitung
Lucent Technologies
Lucent Technologies 2500 EMGP Bedienungsanleitung
Lucent Technologies
Lucent Technologies 9630 Bedienungsanleitung
Lucent Technologies
Lucent Technologies Voice Terminal 8403 Bedienungsanleitung
Lucent Technologies
Lucent Technologies 4412D+ Bedienungsanleitung
Lucent Technologies
Lucent Technologies Definity 8410 Bedienungsanleitung
Lucent Technologies
Lucent Technologies MDW 9040 Leitfaden
Lucent Technologies
Lucent Technologies INDeX 2010 Bedienungsanleitung
Lucent Technologies
Lucent Technologies INDeX 2030 Bedienungsanleitung
Lucent Technologies
Lucent Technologies ISDN 970 Bedienungsanleitung
Lucent Technologies
Lucent Technologies index 2030 Bedienungsanleitung
Lucent Technologies
Lucent Technologies 6201 Bedienungsanleitung
Lucent Technologies
Lucent Technologies INDEX DT1 Bedienungsanleitung
Lucent Technologies
Lucent Technologies 954 Bedienungsanleitung
Lucent Technologies
Lucent Technologies Voice Terminal 8405 Bedienungsanleitung
Lucent Technologies
Lucent Technologies 4406D Bedienungsanleitung
Lucent Technologies
Lucent Technologies MDW 9030P Kurzanleitung
Lucent Technologies
Lucent Technologies DSS/BLF Bedienungsanleitung
Lucent Technologies
Lucent Technologies 6400 Series Bedienungsanleitung
Lucent Technologies
Lucent Technologies MERLIN LEGEND Release 3.1 Single-Line... Bedienungsanleitung
Lucent Technologies
Lucent Technologies 825 Bedienungsanleitung
Lucent Technologies
Lucent Technologies Definity Callmaster II Bedienungsanleitung
Lucent Technologies
Lucent Technologies 302A Bedienungsanleitung
