Lumberjack BGS125 Installationshandbuch
BGS125
250W Wet & Dry Bench Grinder
BGS125
SAFETY AND OPERATING MANUAL
O
RIGINAL INSTRUCTIONS
BGS125
TABLE OF CONTENTS
Welcome to Lumberjack!
Dear Customer, Congratulations on your purchase. Before using the
product for the first time please be sure to read these instructions for use.
They provide you with all the information necessary for using the product safely
and to ensure its long service life.
Closely observe all safety information in these instructions!
General Power Tool Safety Warnings………………………………….…......01
Symbols & Machine Details……….…………………………………….…....……05
What's Included.......... ............. ........……….…………………………….…..06
Assembly…………………………………………………………………………………….7-9
Maintenance and Service………………………………....................…….....13
Lumberjack Guarantee………….………………………………………………..14-15
Declaration of Conformity……………………………………………………………16
Parts List…………..………………………………………………………………………...17
Parts Diagram………………………………………………………………………………18
Operating..................………………………………....................…….....10 - 12
BGS125
01
GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings and
all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for
future reference. The term "power tool" in
the warnings refers to your electric (corded)
power tool or battery-operated (cordless) power
tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with grounded power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with grounded surfaces,
such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
BGS125
02
GENERAL POWER TOOL SAFETY WARNINGS
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4. Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions, taking
into account the working conditions and the work
to be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
5. Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
b) If the replacement of the supply cord is
necessary, this has to be done by the
manufacturer or its agent in order to avoid a
safety hazard.
BGS125
03
GENERAL POWER TOOL SAFETY WARNINGS
6 Additional Warnings for Bench Grinder
a) Firmly bolt the grinder to a work bench orleg
stand at approximately hip height.
b) Never reach topick upa workpiece, a piece of
scrap, oranything else that is inor near the
grinding path ofthe wheel.
c) Avoid awkward operations and hand
positions where a sudden slip could cause your
hand tomove into the wheel. Always makesure
you have good balance.
d) Never stand or have any part of your body in
line with the path ofthe wheel.
e) Do notturn the motor switch on and off
rapidly. This could cause thewheel toloosen
and couldcreate a hazard. Should this ever
occur, stand clear and allow the wheel tocome
to a complete stop. Disconnect your grinder
from the power supply and securely retighten
the wheelnut.
f) Use only flanges furnished with this bench
grinder.
g) If any part of this grinder ismissing or should
break, bend, orfail in anyway, or should any
electrical component fail toperform properly,
shut off the power switch, remove the machine
plug fromthe power source andhave damaged,
missing, orfailed parts replaced before resuming
operation.
h) Do notovertighten the wheel nut. Excessive
tightening can cause the wheel tocrack during
operation.
i)
Always use the grinder’s wheel guards and
safety shields.
j ) Inspect grinding wheel for visible defects. Check
the wheel for fissures and cracks, and test for
normal operation prior to use. Replace cracked
wheel immediately.
k) Adjust distance between wheel and work rest
to maintain 1/16".or less separation as the
diameter ofthe wheel decreases with use. The
value ofseparation used in the marking is tobe the
separation recommended by the manufacturer but
shall not be more than 1/8".
l) Always ease the workpiece against the abrasive
wheel when starting togrind. A harsh impact can
break the wheel. Use light pressure when starting
to grind; too much pressure on a cold wheel can
cause the wheel to crack.
m) Never start the grinder when the wheel isin
contact with the workpiece.
n) Secure work. Always hold workpiece firmly
against the work rest.
o) Do not use the bench grinder if the flange nut
or clamp nut is missing or if the spindle shaft is
bent.
p) Frequently clean grinding dust from beneath
the grinder.
q) Secure long hair so it is above shoulder level to
prevent entanglement in any rotating parts.
r) Stay alert and exercise control. Watch what
you are doing and usecommon sense. do not
operate tool when you are tired. do not rush.
BGS125
04
GENERAL POWER TOOL SAFETY WARNINGS
s) Do nottouch the cut material until it cools.
t) If the power supply cord is damaged, it must
be replaced only bythe manufacturer or by an
authorisedservice centre to avoid risk.
u)Make sure the grinder issecurely mounted as
described in the assembly instructions before
connecting the tool to apower supply.
w) Save these instructions. Refer to them
frequently and use to instruct other users. If you
loan someone this tool, loan them these
instructions also.
7. Using an Extension Cable
.
a) If an extension cable is required, use an
approved triple core extension cable suitable for
the power input of the tool.
b) Grounded tools always require a three wire
extension cable.
c) As the distance from the supply outlet
increases you must use a heavier gauge extension
cable. Using extension cables with inadequately
sized wire causes a serious drop in voltage,
resulting in loss of power and possible tool
damage.
d) The smaller the gauge number of the wire the
greater the capacity of the cord.
f) When using a cable reel, always unwind the
cable completely.
BGS125
05
SYMBOLS AND MACHINE DETAILS
Danger! – Read the operating
instructions to reduce the risk of
injury.
Caution! Wear safety goggles.
Caution! Wear eardefenders.
Caution! Risk of Injury! Do
not reach into the running
saw blade.
Caution! Wear a dust mask.
Machine Details
Specifications:
Mains Voltage - 230V / 50Hz
Power Consumption - 250W
320rpm 200 x
25mm 125 x
50mm
16.7kg
17kg
No load Speed - Wet
Stone Diameter - Dry
Stone Diameter -
Gross Weight -
Nett Weight -
Package Includes:
Dry Stone
Wet Stone
Eye Shield Water
Bath Tool Rest
01010101
06
WHAT'S INCLUDED
BGS125
BD
I
J
E
FG
C
K
L
AN
M
Q
Quantity Item Part
1 Wet & Dry Grinder A
1 Eye shield & fixing screws, nuts B
1 Spark guard bracket & fixing screws C
1 Eye shield mounting bar D
1 Eye shield mounting bracket E
1 Threaded bolt F
1 Mounting bar square bracket G
1 Tool rest, nut & washer H
Quantity Item Part
1 Wet stone grinding stone I
1 Wet stone locking clamp J
1 Wet stone locking spanner K
1 Water container & regulator L
1 Universal support bar M
1 Square edge jig N
1 Universal support bar holder O
1 Support bar P
1 Water trough drain hose Q
BGS125
07
ASSEMBLY INSTRUCTIONS
08
ASSEMBLY INSTRUCTIONS
BGS125
Inhaltsverzeichnis
Andere Lumberjack Schleifer Handbücher
