Lund Interceptor Bedienungsanleitung

Grill mounting nuts

I-819A

Thank you for purchasing a LUND accessory; designed, engineered and built specifically for your vehicle. We have made

every effort to ensure that this hood deflector is top quality in terms of fit, durability, finish and ease of installation.

®

™

Package Contains: 1 Shield Tools Needed: 8mm (5/16”) socket and ratchet

Applications: Dodge Ram, Dodge Dakota

Installation Instructions

Please read carefully and completely before starting.

1. Clean hood of vehicle using hot soapy water, rinse

and dry thoroughly.

RAM: grill support mounts

2. RAM: Open hood and loosen the grill mounting nuts and

the grill support mounting screws. Allow 1/4” to 3/8” gap

between hood and grill.

DAKOTA: Open hood and remove the grill mounting nuts.

Allow 1/4” to 3/8” gap between hood and grill.

3. RAM, DAKOTA: Gently slide shield between hood and grill.

Make sure that the shield is centered left to right on the hood.

4. RAM: Tighten the grill mounting nuts and grill support mount

screws. (NOTE: adjustment of the grill support may be required

to ensure even spacing between the grill and fender. This

adjustment is required for proper fit of the Lund fender shields.)

DAKOTA: Reinstall and tighten grill mounting nuts.

5. RAM, DAKOTA: Inspect fit to make sure shield is aligned

properly with grill. Loosen grill mounts and adjust shield

placement if necessary.

RAM: adjust for even spacing

Proper Alignment

I-819A

®

™

Care & Cleaning

1. Avoid the use of automatic “brush-style” car washes.

2. Do not use cleaning solvents of any kind.

3. To wash, use only a mild soap and dry with a clean cloth or sponge.

4. Do not pull on shield to close the hood.

If painting of the shield is desired:

CHECK FIT BEFORE PAINTING. LUND WILL NOT WARRANT PAINTING ON MISFITTING SHIELDS

1. Prep shield by cleaning with mild soap and water, rinse and dry thoroughly.

DO NOT USE ANY SOLVENTS TO PREP SHIELD!

2. Use only an Acrylic Based Enamel.

3. Apply several light coats of paint as opposed to one thick coat.

4. Let dry for 24 hours.

Andere Handbücher für Interceptor

7

Andere Lund Autozubehör Handbücher

Lund

Lund AVS 37681 Bedienungsanleitung

Lund

Lund Tonno Pro UltraFold Bedienungsanleitung

Lund

Lund AVS Bugflector Bedienungsanleitung

Lund

Lund AVS Bugflector Bedienungsanleitung

Lund

Lund Step Rails 2710 Series Bedienungsanleitung

Lund

Lund AVS Ventvisor Bedienungsanleitung

Lund

Lund REVOLUTION Bedienungsanleitung

Lund

Lund Genesis Bedienungsanleitung

Lund

Lund Genesis Bedienungsanleitung

Lund

Lund SR2 Bedienungsanleitung

Lund

Lund 89122 Bedienungsanleitung

Lund

Lund 84127 Bedienungsanleitung

Lund

Lund REVELATION Bedienungsanleitung

Lund

Lund REVOLUTION BULL BAR Bedienungsanleitung

Lund

Lund Genesis Bedienungsanleitung

Lund

Lund Ventvisor Bedienungsanleitung

Lund

Lund Genesis Bedienungsanleitung

Lund

Lund DEFLECTA-SHIELD EX-935D-03 Bedienungsanleitung

Lund

Lund 34641522 Bedienungsanleitung

Lund

Lund Interceptor Bedienungsanleitung

Lund

Lund Genesis Bedienungsanleitung

Lund

Lund AVS Ventvisor Bedienungsanleitung

Lund

Lund Latitude 26510023 Bedienungsanleitung

Lund

Lund Ventvisor Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung