Lutron Electronics AM-4206M Bedienungsanleitung

metal vane + air flow

ANEMOMETER

Model : AM-4206M

Your purchase of this ANEMOMETER marks a step forward for

you into the field of precision measurement. Although this

METER is a complex and delicate instrument, its durable structure

developed. Please read the following instructions carefully and

always keep this manual within easy reach.

OPERATION MANUAL

TABLE OF CONTENTS

1. FEATURES............................................................... 1

2. SPECIFICATIONS.....................................................

2-1 General Specifications........................................

2-2 Electrical Specifications.......................................3

A. Air velocity.......................................................3

B. Air flow............................................................3

C. Temperature....................................................3

3. FRONT PANEL DESCRIPTION....................................4

3-1 Display............................................................ 4

3-2 Power Off/On Button........................................4

3-3 Data Hold Button.............................................

3-4 / conversion Button..................................℃℉ 4

3-5 MAX/MIN/ Record Button...........................

3-6 Unit/ Conversion Button...............................

3-7 VEL./FLOW Selection Button............................. 4

3-8 Button.......................................................4

3-9 Button.......................................................4

3-10 FLOW MODE Selection Button..........................4

3-11 AVG. START Button......................................... 4

3-12 ENTER/RESET Button......................................

3-13 SAMPLE AREA Settin

Button...........................4

3-14 PROBE INPUT TERMINAL.................................4

3-15 RS232 Output Terminal...................................

3-16 Battery Compartment/Cover............................

4. MEASURING PROCEDURE.........................................5

4-1 Air Velocity Measurement...................................

4-2 Air Flow Measurement........................................6

5. RS232 COMPUTER INTERFACE.................................

6. BATTERY REPLACEMENT..........................................10

1. FEATURES

* Metal vane pobe, heavy duty, wide range measurement.

* Air flow : CMM ( m^3/min. ) and CFM ( ft^3/min. ).

Air velocity : m/s, ft/min, km/h, knots, mile/h.

Air temperature:

*3 air flow mode: instant, 2/3 V.max, Average.

* Low-friction ball vane wheels make sure high accuracy in

high & low velocities.

* Large LCD with dual display.

*Record maximum and minimum reading with recall.

* Data hold.

* Microcomputer circuit provides special function & offer

high accuracy.

* Auto shut off saves battery life.

* Thermistor sensor for Temp. measurement, fast response time.

* Build-in low battery indicator.

* Operates with 006P DC 9V battery.

* RS232 PC serial interface.

* Separate probe, easy for operation of different measurement

environment.

* Used the durable, long-lasting components, including a

strong, light weight ABS-plastic housing case.

*Wide applications: use this anemometer to check air

conditioning & heating systems, measure air velocities, wind

temperature...etc.

SPECIFICATIONS

2-1 General Specification

Circuit Exclusive one-chip of microcomputer

LSI circuit.

Display * 13 mm (0.5") Super large LCD

display.

* Dual functions display.

Measurement Air velocity:

m/s (meters per second)

km/h ( kilometers per hour ),

ft/min ( feet per minute ),

knots ( nautical miles per hour ),

mile/h ( miles per hour ),

Air flow:

CMM ( m^3/min. )

CFM ( ft^3/min. ).

Air temperature:

/℃℉

Data hold.

Sensor

Air velocity & Air flow

Structure Metal structure, Conventional

twisted van arm and low friction

ball bearing design.

Temperature :

Thermistor.

Memory Record maximum & minimum

Recall reading value with recall.

Power off Auto shut off saves battery life

or manual off by push button.

Sampling Approx. 1 sec.

Time

Operating Less than 80% RH.

Humidity

Operating

Meter

0 to 50 ( 32 to 122 )℃℃℉ ℉

Temperature

Probe

0 to 80 /32 to 176℃℃℉ ℉

Data Output RS 232 PC serial interface.

Power Supply Alkaline or heavy duty type DC 9V battery,

006P, MN1604 (PP3) or equivalent.

Power Current Approx. DC 8.3 mA.

Weight 381 g/0.84 LB, main instrument

Dimension Main instrument : 180 x 72 x 32 mm

Sensor head: Round, 72mm Dia.

Accessories Instruction manual.....................

1 PC.

Included Sensor probe.............................

1 PC.

Carryin

case............................. 1 PC.

Optional Data acquisition software........

SW-U801-WIN

Accessories USB cable..............................

USB-01

RS232 cable...........................UPCB-01

2-2 Electrical Specifications

A. Air velocity

Measurement Ran

e Resolution Accuracy

m/s 0.4 - 35.0 m/s 0.1 m/s ±(2%+0.2m/s)

0.01m/s,<10m/s

km/h 1.4 - 126.0 km/h 0.1 km/h ±(2%+0.8km/h)

mile/h 0.9 - 78.3 mph 0.1 mile/h ± (2%+0.4mile/h)

knots 0.8 - 68.0 knots 0.1 knots ±(2%+0.4knots)

ft/min 79 - 6890 ft/min 1 ft/min ± (2%+40 ft/min)

Remark : For prolon

ed life and safe operation, if

measurin

ran

e > 30 m/s please do not make th

operation over 5 minutes continuously.

B. Air flow

Measurement Ran

e Resolution Area

CMM ( m^3/min. ) 0-999,900 m^3/min. 0.001-100 0.001-9,999 m^2/min.

CFM ( ft^3/min. ).0-999,900 ft^3/min. 0.001-100 0.001-9,999 ft^2/min.

C. Air temperature

Measuring Range 0 to 80 /32 to 176℃℃℉ ℉

Resolution 0.1 /0.1℃℉

Accuracy 0.8 /1.5 ( < 60 )℃℉ ℃

3. FRONT PANEL DESCRIPTION

Fig. 1

3-1 Display 3-11 AVG.START Button

3-2 Power Off/On Button 3-12 ENTER/RESET Button

3-3 Data Hold Button 3-13 SAMPLE AREA Button

3-4 / conversion Button℃℉ 3-14 Probe Input Socket

3-5 MAX/MIN/. Record Button 3-15 RS232 Output Terminal

3-6 UNIT/ conversion Button 3-16 Battery/Compartment/

3-7 VEL./FLOW Button Cover

3-8 Button 3-17 Vane Probe Head

3-9 Button 3-18 Vane Probe Handle

3-10 FLOW MODE Button

MEASURING PROCEDURE

4-1 Air Velocity Measurement

1)Install the " Probe Plu

" into the " Probe Input Terminal "

( 3-14, Fi

. 1 ).

2)Power on the meter by pressin

the " Power OFF/ON

Button " ( 3-2, Fi

. 1 ).

3)Select VELOCITY measurin

mode by pressin

" VEL./FLOW Button " ( 3-7, Fi

. 1 ) to

et into velocity

measurin

mode.

4)Select the desired temperature units, by pressin

the " /℃℉

Conversion Button " ( 3-4, Fi

. 1 ).

5)Select the desired air velocity measurement units,

( mph, ft/min, knot, Km/h, m/s ) by pressin

the " Unit/

Button " ( 3-6, Fi

. 1 ).

It is ready to measure air velocity when you finish abov

settin

. Re

ardin

other functions relative to Velocity

Mode please refer to followin

description.

Data Hold Function:

Durin

the measurin

procedure, pressin

the " Data

Hold Button " ( 3-3, Fi

. 1 ) will hold the measured value

and the LCD will indicate " HOLD " symbol on the left.

Press the "Data Hold Button" a

ain to release th

data hold function.

Data Record( Max., Min.

)

* Press the " MAX/MIN/. Button " ( 3-5, Fi

. 1 ) once a

while to

et into Data Record mode. A "REC" symbol

appears on the LCD display. At the same time meter

records value received by probe.

* Press a

ain, " Max " symbol appears on the left down

corner of the LCD and the Maximum value durin

recordin

procedure will displayed on the LCD at the

same time.

*Press a

ain, " Min " symbol appears on the left down

corner of the LCD and the Minimum value during

recording procedure will displayed on the LCD at the

same time.

Press the MAX/MIN/. Button for around 3 seconds

to exit Data Record mode.

4-2 Air Flow Measurement

1)Install the "Probe Plu

" into the " Probe Input Terminal "

( 3-14, Fi

. 1 ).

2)Power ON the meter by pressin

the " Power OFF/ON

Button " ( 3-2, Fi

. 1 ).

3)Select FLOW measurin

mode by pressin

" VEL./FLOW

Button " ( 3-7, Fi

. 1 ) to

et into flow measurin

mode.

4)Select the desired air velocity measurement units,

( CMM or CFM ) by pressin

the " Unit/ Button "

( 3-6, Fig. 1 ).

Note :

Under Air Flow Mode, meter is without Temp. function.

5)Press " SAMPLE AREA Button " ( 3-13, Fi

. 1 ) to set

the measurin

area ( m 2 ft 2) The more accurate area　　

setting is the more accurate air flow value measured.

When you press the button you may see a " " symbol

appears and the fist di

it sparklin

. Now you can continue

the area settin

procedure.

6)Area settin

producre uses four buttons " ", "UNIT/ ",

" " and " MAX/MIN/. ". ( please refer to Fig. 1 page 4 )

Note :

" " button

Press one time to add one of the sparkled digit.

" UNIT/ " button

Press one time to decrease one from the sparkled digit.

* " " button

Press one time to select next digit.

* "MAX/MIN/. " button

Setting the decimal point.

After you set the number you need, please press

"ENTER/RESET" button to finish the settin

procedure.

For instance, if you want to set the sample area 120.3

square feet, please press " UNIT/ " button to make

sure " ft 2" appears on the display. Then press　

" SAMPLE AREA " button to get into the measuring area

setting procedure. Press " " button one time to set 1

and press " " button to select the next digit. Press " "

button two times to set 2 then press " " button and press

" MAX/MIN/. " button to set the decimal point. Press " "

button three times to set 3 and press "ENTER/RESET" button

to finish the sample area settin

procedure.

7)Under air flow measurin

, we provide 3 kinds of flow mode

for you to apply by pressin

the "FLOW MODE" button.

. 2/3V Max mode :

Selectin

this mode you can

et the 2/3 of the Max.

measured value. For instance Max. value is 300 CFM

but under 2/3V Max mode you can see 200 CFM only.

VG mode :

Under this mode you can avera

e maximum 20 records

by pressin

the " AVG.START " button manually. You

can see the avera

e number from the ri

ht-bottom o

LCD. The AVG formula listed as below:

1st Records +.........+ Nth Records

C.INSTANT mode :

LCD display shows measured number directly.

8)Under " 2/3V Max " and " AVG " mode, press

" ENTER/RESET " button to reset the previous settin

and restart measurin

ain.

Data Hold Function :

Durin

the measurin

procedure, pressin

the " Data

Hold Button " ( 3-3, Fi

. 1 ) will hold the measured value

and the LCD will indicate " HOLD " symbol on the left.

Press the "Data Hold Button" again to release the

data hold function.

)

Data Record( Max., Min. )

*Press the MAX/MIN/. Button to

et into Data Record

mode. A "REC" symbol appears on the LCD display. At

the same time meter records value received by probe.

*Press a

ain, " Max " symbol appears on the left down

corner of the LCD and the Maximum value durin

recordin

procedure will displayed on the LCD at the

same time.

Measuring Consideration:

he " " mark on the sensor head indicates the

mark need to face against the direction of air flow.

Inhaltsverzeichnis

Andere Lutron Electronics Messgerät Handbücher

Lutron Electronics

Lutron Electronics vt-8204 Bedienungsanleitung

Lutron Electronics

Lutron Electronics AM-4233SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics SL-4011 Installationshandbuch

Lutron Electronics

Lutron Electronics PDO-519 Bedienungsanleitung

Lutron Electronics

Lutron Electronics VC-9200 Bedienungsanleitung

Lutron Electronics

Lutron Electronics CM-9930R Bedienungsanleitung

Lutron Electronics

Lutron Electronics SP-8001 Bedienungsanleitung

Lutron Electronics

Lutron Electronics AM-4220 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PM-1063SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics DW-6064 Bedienungsanleitung

Lutron Electronics

Lutron Electronics DW-6063 Bedienungsanleitung

Lutron Electronics

Lutron Electronics SL-4112 Bedienungsanleitung

Lutron Electronics

Lutron Electronics EM-9300SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics CM-9942G Bedienungsanleitung

Lutron Electronics

Lutron Electronics PWA-301 Bedienungsanleitung

Lutron Electronics

Lutron Electronics CT-2012 Bedienungsanleitung

Lutron Electronics

Lutron Electronics LM-8010 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PCD-431 Bedienungsanleitung

Lutron Electronics

Lutron Electronics SL-4010 Bedienungsanleitung

Lutron Electronics

Lutron Electronics AM-4201 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PE-21 Bedienungsanleitung

Lutron Electronics

Lutron Electronics VB-8213 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PCO-350 Bedienungsanleitung

Lutron Electronics

Lutron Electronics SPM-1116SD Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung