Lutron Electronics CD-4322 Bedienungsanleitung

1,600 point data logger, RS232, AC/DC adapter

2,000 uS 20 mS, 100 mS, auto range, auto calibration

CONDUCTIVITY

METER

Model : CD-4322

Your purchase of this

CONDUCTIVITY METER

marks a step forward for

you into the field of

precision measurement.

Although this METER is

a complex and delicate

instrument, its durable

structure will allow

many years of use if

proper operating

techniques are

developed. Please read

the following

instructions carefully

and always keep this

manual within easy

reach.

OPERATION MANUAL

TABLE OF CONTENTS

1. FEATURES....................................................................... 1

2. SPECIFICATIONS............................................................. 2

3. FRONT PANEL DESCRIPTION...........................................

3-1 Display...................................................................... 4

3-2 Power/ESC/Send button.............................................

3-3 FUNC/HOLD button ( Send quit/ button ).................

▲4

3-4 REC/Enter button....................................................... 4

3-5 Settin

/Lo

er button ( button ).............................▼4

3-6 Probe input socket.....................................................

3-7 DC 9V adapter socket.................................................4

3-8 RS-232 output terminal..............................................

3-9 Battery compartment/Cover........................................4

3-10 Battery cover screws................................................

3-11 Probe Handle........................................................... 4

3-12 Sensin

Electrode.....................................................4

3-13 Probe Plu

............................................................... 4

4. MEASURING PROCEDURE.................................................6

4-1 Conductivity Measurement..........................................6

4-2 TDS Measurement......................................................6

4-3 Data Hold..................................................................7

4-4 Data Record ( Max., Min. readin

)..............................7

4-5 Data Lo

er...............................................................8

5. ADVANCED ADJUSTMENT PROCEDURE.............................10

5-1 Temp. compensation factor settin

.............................

5-2 Chan

e the Temp , unit......................................℃℉ 11

5-3 Auto power ON/OFF...................................................12

5-4 Chan

e the data lo

er samplin

time........................

5-5 To show the balance data numbers in the memory......

5-6 Clear the existin

savin

data from the memory..........

5-7 Code enterin

for the further calibration usa

e............

6. SEND THE DATA OUT FROM THE METER.......................... 13

7. RS232 PC SERIAL INTERFACE..........................................

8. BATTERY REPLACEMENT..................................................17

9. CALIBRATION..................................................................17

10. OPTIONAL ACCESSORIES...............................................19

1. FEATURES

* * 3 measurement range, 2,000 uS, 20 mS, 100 mS with

auto range.

* Function : Conductivity, TDS.

* Separate probe, easy for operation of different

measurement environment.

* Automatic temperature compensation range : 0 to 50 .℃

* Carbon rod electrode for long life.

* Innovative feature with built-in automatic temperature

compensation factor adjustable between 0 to 5.0% per .℃

* Selecting " 0% per " of Temp. Coefficient Adjust,℃

allows you to take uncompensated conductivity

readings ( absolute conductivity measurement ).

* Microprocessor circuit assures high accuracy and provides

special functions and features.

* Multi-display, show Conductivity and Temp. value at the

same time.

* Data hold function for freezing the desired value.

* Records max. and min. value with recall.

* Build in temperature , measurement with default.℃℉

*Manual and auto data logger, with flexible sampling

time selection, can save max. 1,600 reading data.

*Power function can default to auto off or manual off.

*Build in the input socket for DC 9V power adapter.

* Use the durable, long-lasting components, including a

heavy duty & compact ABS-plastic housing case.

* RS232/USB PC serial interface.

* Applications for Aquarium, Medical research, Agriculture,

Fish hatcheries, Laboratory, Water conditioning, Mining

industry, Schools & Colleges, Quality control...

industry, quality control, school & college, water

conditioning.

2. SPECIFICATIONS

Display LCD size : 44 mm x 29 mm.

Dual function LCD

Circuit Custom one-chip of microprocessor LSI

circuit.

Function : Conductivity, TDS.

Ran

es and

Conductivity ran

e :

Resolution 2000 uS/20.00 mS/100 mS.

Conductivity resolution :

* three ran

1 uS/0.01 mS/0.1 mS.

* auto ran

DS ran

e :

1200 ppm/12,000 ppm/66,000 ppm.

DS resolution :

1 ppm/10 ppm/100 ppm.

Accuracy ± ( 2% FS + 1 d )

* 23 ± 5

℃

* FS : full scal

Temperature Automatic from 0 to 50 (32 - 122 ),℃℉

Compensation with temperature compensation factor

variable between 0 to 5.0% per C.

Conductivity Carbon rod electrode for lon

life.

Probe

Structure

Memory Records Maximum, Minimum readin

s with

Recall recall.

Power of

Auto power off saves battery life, or manual

off by push button.

* Auto power off :

Power will off automatically after 10 min., if no button

be pressed.

Data Output RS 232 PC serial interface.

Sampling Time Manual Push the data logger button once

of Data Logger will save data one time.

* Set sampling time to 0 second.

Auto 1, 2, 5, 10, 30, 60, 600, 1800,

3600 seconds.

Data Logger Max. 1,600-point Data logger

number

Data Hold Freeze the display reading.

Sampling Time Approx. 1 second.

of display

Data Output RS 232/USB PC serial interface.

* Connect the optional RS232 cable

UPCB-02 will get the RS232 plug.

* Connect the optional USB cable

USB-01 will get the USB plug.

Operating 0 to 50 .℃

Temperature

Operating Less than 80% RH.

Humidity

Power Supply 006P DC 9V battery ( Alkaline or Heavy duty

type ) or DC 9V adapter input.

* AC/DC power adapter is optional.

Power Current Approx. DC 5.7 mA.

Weight 295 g/0.65 LB.

* Include probe and batterry.

Dimension

Main instrument :

135 x 60 x 33 mm.

Conductivity Probe :

Round, 22 mm Dia. x 120 mm length.

Accessories Conductivity probe..........................1 PC.

Included Operation manual...........................1 PC.

Optional * 1.413 mS Conductivity Standard

Accessories Solution..............................

CD-14

* RS232 cable........................UPCB-02

* USB cable...........................

USB-01

* Data Acquisition software.....SW-U801-WIN

* Data lo

er software...........

SW-DL2005

* Hard carryin

case...............CA-06

* Soft carryin

case................CA-05A

* AC to DC 9V adapter

3. FRONT PANEL DESCRIPTION

Fig. 1

Fig. 2

3-1 Display

3-2 Power/ESC/Send button

3-3 FUNC/Hold button ( Send quit/ button )▲

3-4 REC/Enter button

3-5 Setting/Logger button ( button )▼

3-6 Probe input socket

3-7 DC 9V adapter socket

3-8 RS-232 output terminal

3-9 Battery compartment/Cover

3-10 Battery cover screws

3-11 Probe Handle

3-12 Sensing Electrode

3-13 Probe Plug

4. MEASURING PROCEDURE

4-1 Conductivity measurement

1)Turn on the meter by pressing the " Power Button "

( 3-2, Fig. 1 ) momentarily.

* Press the " Power Button " ( 3-2, Fig. 1 )

momentarily again will turn off the meter.

Connect the " Probe Plug " ( 3-13, Fig. 2 ) into the

" Probe input socket " ( 3-6, Fig. 1 ).

The " Display " ( 3-1, Fig. 1 ) will show the unit as :

xx,x ℃uS

Now the meter is ready for the conductivity measurement.

2)Hold the " Probe Handle " ( 3-11, Fig. 2 ) by hand and

immerse the " Sensing Electrode " ( 3-12, Fig. 2 )

immersed wholly into the measured solution. Shake the "

Sensing Electrode " to let the electrode's internal air

bubble drift out from the sensing Electrode.

" Display " ( 3-1, Fig, 1 ) will show the conductivity

mS ( uS ) values, at the same time the left bottom

display will show the Temp. value of the measured

solution.

The method to change the Temp. unit from

" " to " " or " " to " ", please refer to :℃℉℉℃

Chapter 5-2 Change the Temp , unit, page 11.℃℉

When make the

measurement should

immerse the " Sensing

Electrode " immersed

wholly into the measured

solution.

4-2 TDS measurement

1)During the above 4-1 Conductivity measurement, if

press the " Hold button " ( 3-3, Fig. 1 ) continuously at

least two seconds will enter into the function of TDS

measurement with default, the display will show as :

xx,x ℃PPM

Other TDS measurement procedures are similar as Conductivity

measurement

2)During the TDS measurement, if press the " Hold

button " ( 3-3, Fig. 1 ) continuously at least two

seconds again will enter into the function of

Conductivity measurement with default, refer

section 4-1.

4-3 Data Hold

During the measurement, press the " Hold button " ( 3-3,

Fig. 1 ) once will hold the measured value & the LCD will

display a " HOLD " symbol.

* Press the " Hold button " once again will release the

data hold function.

4-4 Data Record ( Max., Min. reading )

* The data record function records the maximum and

minimum readings. Press the " REC button " ( 3-4, Fig. 1

) once to start the Data Record function and there

will be a " REC " symbol on the display.

* With the " REC " symbol on the display :

a)Press the " REC button " ( 3-4, Fig. 1 ) once, the

" REC MAX " symbol along with the maximum value

will appear on the display.

If intend to delete the maximum value, press the

" Hold button " ( 3-3, Fig. 1 ) once, the display will

show the " REC " symbol only & execute the

memory function continuously.

b)Press the " REC button " ( 3-4, Fig. 1 ) again, the

" REC MIN. " symbol along with the minimum value

will appear on the display.

If intend to delete the minimum value, press the

" Hold button " ( 3-3, Fig. 1 ) once, then the display

will show the " REC " symbol only & execute the

memory function continuously.

c)To exit the memory record function, just press the

" REC " button for 2 seconds at least. The display will

revert to the current reading.

4-5 Data Logger

The data logger function can save 1,600-point measuring

data.

Inhaltsverzeichnis

Andere Lutron Electronics Messgerät Handbücher

Lutron Electronics

Lutron Electronics GCH-2018 Bedienungsanleitung

Lutron Electronics

Lutron Electronics YK-37UVSD Bedienungsanleitung

Lutron Electronics

Lutron Electronics SOIL PH METER Bedienungsanleitung

Lutron Electronics

Lutron Electronics PCO-350 Bedienungsanleitung

Lutron Electronics

Lutron Electronics EM-1910 Bedienungsanleitung

Lutron Electronics

Lutron Electronics SP-82AC Bedienungsanleitung

Lutron Electronics

Lutron Electronics DW-6095 Bedienungsanleitung

Lutron Electronics

Lutron Electronics LCR-9063 Bedienungsanleitung

Lutron Electronics

Lutron Electronics SL-4022 Bedienungsanleitung

Lutron Electronics

Lutron Electronics CL-2006 Bedienungsanleitung

Lutron Electronics

Lutron Electronics MMA-386SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics LM-81LX Installationshandbuch

Lutron Electronics

Lutron Electronics CO2-9914SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics PH-222 Bedienungsanleitung

Lutron Electronics

Lutron Electronics EMF-819 Installationshandbuch

Lutron Electronics

Lutron Electronics LX-1128SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics VB-8206SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics SP-8001 Bedienungsanleitung

Lutron Electronics

Lutron Electronics WA-2017SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics MG-3OO2 Bedienungsanleitung

Lutron Electronics

Lutron Electronics EMF-839 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PMS-713 Bedienungsanleitung

Lutron Electronics

Lutron Electronics EMF-8218SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics CT-2012 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung