Lutron Electronics Vt-8204 Bedienungsanleitung

3 in

IBRATION

TACHOMETE

Model : VT-8204

our purchase of this

VIBRATION TACHOMETER

marks a step forward for

you into the field o

precision measurement.

lthough this VIBRATION

TACHOMETER is a

complex and delicate

instrument, its durable

structure will allow many

years of use if proper

operating techniques are

developed. Please read

the following instructions

carefully and always keep

this manual within easy

reach.

OPERATION MANUAL

TABLE OF CONTENTS

1 FEATURES................................................................

2 SPECIFICATIONS......................................................

3 FRONT PANEL DESCRIPTION.....................................7

3-1 Display....................................................................

3-2 Power button ( vibration ).........................................7

3-3 Hold/ESC/Zero button...............................................7

3-4 Eenter/REC button....................................................7

3-5 Function/Send button...............................................

3-6 Unit/Logger button................................................... 7

3-7 Operation button ( tachometer )................................7

3-8 Surface speed wheel ( contact tach. )........................7

3-9 RPM adapter ( contact tach. )....................................7

3-10 Protection cover ( contact tach. )..............................7

3-11 Screw for protection cover.......................................

3-12 BNC plug ( vibration sensor )....................................7

3-13 Vibration sensor.......................................................7

3-14 Magnetic base.........................................................

3-15 BNC socket ( vibration sensor ).................................7

3-16 Laser light beam ( photo tach. )...............................

3-17 Photo tach. detecting sensor....................................

3-18 IR probe input socket...............................................7

3-19 RS-232 output terminal............................................7

3-20 Battery cover/battery compartment..........................

3-21 Cone rubber ( RPM adapter )....................................7

3-22 Funnel rubber ( RPM adapter ).................................

4 VIBRATION MEASURING PROCEDURE........................9

5 TACHOMETER MEASURING PROCEDURE....................

6 IR TEMP. MEASURING PROCEDURE............................24

7 RS232 PC SERIAL INTERFACE....................................24

8 BATTERY REPLACEMENT...........................................

9 OPTIONAL ACCESSORIES..........................................

10 CLASSIFICATION RANGES ( Vibration ).....................

11 SENSITIVITY RELATIVE TABLE ACCORDING

ISO 2954 ( Vibration ).............................................

1. FEATURES

Vibration function :

* Applications for industrial vibration monitoring :

All industrial machinery vibrates. The level of vibration

is a useful guide to machine condition. Poor balance,

misalignment & looseness of the structure will cause

the vibration level increase, it is a sure sign that the

maintenance is needed.

* Acceleration range : 200 m/s^2.

* Velocity range : 200 mm/s.

* Displacement ( p-p ) range : 2 mm.

* Metric and imperial display unit .

* RMS measurement for Acceleration and Velocity.

* Peak to peak measurement for Displacement.

* Peak function for Acceleration and Velocity.

* Max. hold function for Acceleration ( peak ),

Velocity ( peak ) and Displacement ( peak to peak ).

* Frequency range 10 Hz - 1 kHz, sensitivity relative

meet ISO 2954.

* Zero function, executed by front buttons.

* Data logger function with flexible sampling time

selection, can save max. 1000-point data into the

memory circuit.

* Data hold button to freeze the desired reading.

* Memory function to record maximum and minimum

reading of RMS value ( Acc., Vel. ) or Displacement ( p-p ).

* Auto shut off saves battery life.

* Professional vibration meter supply with separate

vibration sensor & magnetic base, full set.

Tachometer ( photo, contact ) function :

* Laser light detecting source, long measuring range up

to 1.5 meters, it is useful in the RPM measurement

application where the machine would be a risk to the

operator or close access is difficult or not possible.

* The best Tachometer in the world. 2 in 1, one

instrument combine Photo Tachometer & Contact

Tachometer.

* Wide measuring range from 0.5 to 100,000 RPM, 0.1

RPM resolution for the measured value < 1000 RPM.

* Microprocessor based circuit, crystal time base, high

precision with 0.05% accuracy.

* Memory with recall function, the last value, max., value,

min. value will be stored into the memory automatically.

* Patent patented.

General function :

* Super large LCD display.

* No contact infrared temperature measurement via

optional IR temp. probe.

* RS 232 computer interface.

* Optional data acquisition software and data logger

software.

* Microcomputer circuit, high performance.

* Built-in low battery indicator.

* Heavy duty & compact housing case.

* Complete set with the hard carrying case.

2. SPECIFICATIONS

2-1 Vibration function

Velocity 0.5 to 199.9 mm/s

range 0.05 to 19.99 cm/s

0.02 to 7.87 in/s

Remark

Velocity peak range :

1.0 to 199.9 mm/s

Acceleration 0.5 to 199.9 m/s^2

range 0.05 to 20.39 g

2 to 656 ft/s^2

Remark

Acceleration peak range :

1.0 to 199.9 m/s^2

Displacement 0.005 to 1.999 mm

( p-p ) 0.002 to 0.078 inch

* p-p : Peak to Peak

Frequency 10 Hz to 1 KHz

range

* Sensitivity relative during the

the frequency range meet ISO 2954

Refer to table 1, page 28.

Function Velocity RMS, Peak, Max. hold (peak).

Acceleration RMS, Peak, Max. hold (peak).

Displacement p-p, Max. hold (p-p).

* Peak : To measure the peak value.

Note : Peak function is available when the

measuring value > 25 digits only.

* p-p : Peak to peak value.

* Max. hold : To hold the max. peak or p-p value.

Accuracy ± ( 5 % + 5 d ) reading , 160 Hz, 80 Hz.

* 23 ± 5 ℃

Calibration Velocity 50 mm/s ( 160 Hz )

point Acceleration 50 m/s^2 ( 160 Hz )

Displacement ( p-p ) 0.14 mm ( 160 Hz )

Data hold Freeze the desired reading.

Memory Maximum & Minimum value.

Memory function are only available for

RMS ( Acc., Vel. ) and Displacement (p-p).

Sampling time Approx. 1 second.

Data logger Data logger function with flexible

sampling time selection, can save max.

1000-point data into the memory circuit.

Sampling Time Manual Push the data logger button

of Data Logger once will save the data one

time.

Auto 1, 2, 10, 30, 60, 600, 1800,

3600 seconds.

Sampling time Approx. 1 second.

Power off Auto shut off, saves battery life,

or manual off by push button.

2-2 Tachometer ( photo, contact ) function

Range Photo Tachometer : 10 to 99,999 RPM

Contact Tachometer : 0.5 to 19,999 RPM

Surface Speed ( m/min. ) :

0.05 to 1,999.9 m/min.

Surface Speed ( ft/min. ) :

0.2 to 6,560 ft/min.

Accuracy ± ( 0.05 % + 1 digit ).

Resolution 0.1 RPM < 1,000 RPM

1 RPM 1,000 RPM≧

0.01 m/min. < 100 m/min.

0.1 m/min. 100 m/min.≧

0.1 ft/min. < 1000 ft/min.

1 ft/min. 1,000 ft/min.≧

Time base Quartz crystal

Sampling Time Photo Tachometer - 1 sec. ( 60 RPM ).≧

Contact Tachometer - 1 sec. ( 6 RPM ).≧

Photo 50 - 1,500 mm typically.

Tachometer

* Spec. of detecting distance are that under

detecting

the size of reflecting tape is 10 mm square

distance

& the measuring RPM value is 1,800 PPM.

The max. & min. detecting distance may

change under different environment,

different reflecting tape or the measuring

RPM beyond 1800 RPM.

Laser light * Less than 1 mW.

source * Class 2 laser diode. Red. Wave length

* Photo Tach.

is 645 nm approximately.

Memory Last value, Max. value, Min. value.

2-3 General function

Display 45 mm x 48 mm LCD size.

Circuit Exclusive microcomputer circuit.

Data output RS 232 serial output.

Operating 0 to 50 ( 32 to 122 ).℃℉

temperature

Operating Less than 80% RH.

humidity

Power supply 1.5 V battery x 4 PCs

UM-3, AA, R6

Alkaline or heavy duty type,

Power Vibration Approx. 18 mA

consumption Contact Tach. Approx. 20 mA

Photo Tach. Approx. 31 mA

Weight Meter 397 g/0.87 LB

Probe with 110 g/0.24 LB

magnetic base

Dimension Meter :

46.8 x 75.5 x 188 mm

( 1.8 x 3.0 x 7.4 inch ).

Vibration sensor probe:

Round 18 mm Dia. x 40 mm.

Accessories Instruction manual......................... 1 PC.

included Vibration sensor ( VB-82 )..............

1 PC.

Magnetic base...............................

1 PC.

Reflecting tape marks (600 mm)..... 1 PC.

RPM cone rubber, AS-35A............... 1 PC.

RPM funnel rubber, AS-35B............

1 PC.

Carrying Case................................

1 PC.

Optional *Data Acquisition software,

accessories ................................SW-U801-WIN

*Data Logger software, SW-DL2005

*RS232 cable..............UPCB-02

*USB cable.................

USB-01

*IR Temp. probe.........IR-962

3. FRONT PANEL DESCRIPTION

Fig. 1

3-1 Display

3-2 Power button ( vibration )

3-3 Hold/ESC/Zero button

3-4 Eenter/REC button

3-5 Function/Send button

3-6 Unit/Logger button

3-7 Operation button ( tachometer )

3-8 Surface speed wheel ( contact tach. )

3-9 RPM adapter ( contact tach. )

3-10 Protection cover ( contact tach. )

3-11 Screw for protection cover

3-12 BNC plug ( vibration sensor )

3-13 Vibration sensor

3-14 Magnetic base

3-15 BNC socket ( vibration sensor )

3-16 Laser light beam ( photo tach. )

3-17 Photo tach. detecting sensor

3-18 IR probe input socket

3-19 RS-232 output terminal

3-20 Battery cover/battery compartment

3-21 Cone rubber ( RPM adapter )

3-22 Funnel rubber ( RPM adapter )

Andere Handbücher für vt-8204

Inhaltsverzeichnis

Andere Lutron Electronics Messgerät Handbücher

Lutron Electronics

Lutron Electronics WA-2015 Bedienungsanleitung

Lutron Electronics

Lutron Electronics GCO-2008 Bedienungsanleitung

Lutron Electronics

Lutron Electronics UV-340A Bedienungsanleitung

Lutron Electronics

Lutron Electronics YK-2005LX Bedienungsanleitung

Lutron Electronics

Lutron Electronics CM-9942G Bedienungsanleitung

Lutron Electronics

Lutron Electronics MMA-386SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics LM-8000A Bedienungsanleitung

Lutron Electronics

Lutron Electronics Radio Powr Sav LRF2-DCRB Montage- und Bedienungsanleitung

Lutron Electronics

Lutron Electronics TU-2016 Bedienungsanleitung

Lutron Electronics

Lutron Electronics SL-4112 Bedienungsanleitung

Lutron Electronics

Lutron Electronics SP-82AM Bedienungsanleitung

Lutron Electronics

Lutron Electronics SL-4023SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics YK-2001PHA Bedienungsanleitung

Lutron Electronics

Lutron Electronics DW-6064 Bedienungsanleitung

Lutron Electronics

Lutron Electronics SL-4011 Installationshandbuch

Lutron Electronics

Lutron Electronics SL-4033SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics DO-5512SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics PCE-228 Bedienungsanleitung

Lutron Electronics

Lutron Electronics CT-2012 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PH-321M Bedienungsanleitung

Lutron Electronics

Lutron Electronics ARW 4220 Bedienungsanleitung

Lutron Electronics

Lutron Electronics MG-3OO2 Bedienungsanleitung

Lutron Electronics

Lutron Electronics HT-3007SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics PM-9100HA Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung

Lutron Electronics vt-8204 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken