Luxul XAP-1030 Bedienungsanleitung

luxul.com

Simply Connected

User Guide

XAP-1030

Luxul Xen™ Commercial Grade Omni

802.11b/g/n Wireless Access Point

Use the XAP-1030 to:

XProvide a Centrally Located High Performance Wi-Fi Network

XDeliver “Whole Home” or Ofﬁce 802.11n Wi-Fi Coverage With

a Single Access Point

XIncrease Mobile Client Device Network Sensitivity

and Performance

XSimplify Installation While Minimizing Setup Time and Expense

XEliminate Client Device Roaming Issues

User Guide

COMMERCIAL GRADE OMNI

802.11b/g/n Wireless Access Point

Model Number: XAP-1030

FCC ID: W59XAP103X

IC: 8584A-XAP103X

USER GUIDE

No part of this publication may be modiﬁed or adapted in any way, for any

purposes without permission in writing from Luxul. The material in this manual

is subject to change without notice. Luxul reserves the right to make changes to

any product to improve reliability, function, or design. No license is granted, either

expressly or by implication or otherwise under any Luxul intellectual property rights.

An implied license only exists for equipment, circuits and subsystems contained in

this or any Luxul product.

This product is covered by one or more U.S. and foreign patents Patents: 7,379,717,

6,606,075, 6,373,448, other patents pending

DOCUMENT CONVENTIONS

The following graphical alerts are used in this document to indicate notable situations:

NOTE: Tips, hints, or special requirements that you should take note of.

CAUTION: Care is required. Disregarding a caution can result in data

loss or equipment malfunction.

WARNING!: Indicates a condition or procedure that could result in

personal injury or equipment damage.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

User Guide

CONTENTS

1 INTRODUCTION 4

1.1 Warnings 5

1.2 Site Preparation 5

2 XAP-1030 SPECIFICATIONS 6

3 GETTING STARTED 7

3.1 System Requirements 7

3.2 Package Contents 7

3.3 Safety Information 7

4 HARDWARE FEATURES AND INSTALLATION 8

4.1 Front View 8

4.2 Top View 10

4.3 Rear View 10

4.3 Environmental Requirements 11

4.4 Hardware Installation 11

5 CONFIGURATION 15

5.1 Login 15

5.2 Quick Setup 16

5.3 Wireless 19

5.4 Maintenance 22

5.6 Status 24

6 REGULATORY COMPLIANCE 26

6.1 Health and Safety Recommendations 26

6.2 RF Exposure Guidelines 26

6.3 Radio Frequency Interference Requirements—FCC 27

6.4 Radio Transmitters (Part 15) 28

6.5 Industry Canada (RSS-Gen Issue 2) 28

APPENDIX 1: TECHNICAL SUPPORT 28

User Guide

1 INTRODUCTION

Congratulations on your purchase of the Luxul Xen™ Commercial Grade Omni

802.11n Wireless Access Point (XAP-1030). The XAP-1030 provides superior

Omnidirectional Wi-Fi coverage in a sturdy and versatile metal enclosure for

deployment in post-construction residential and commercial Wi-Fi installations.

The XAP-1030 is designed to be placed inconspicuously in a centrally located utility

closet or other non-public indoor location. It can be mounted on a wall or simply

placed on a shelf or cabinet. Powered by Luxul’s Xen3D™ Technology, the XAP-1030

enhances data throughput and coverage by as much as 400% over traditional Wi-Fi

gear, providing for whole home or small ofﬁce coverage with a single access point.

With this high performance wireless access point, computers and wireless devices

that are compatible with 802.11b/g and/or 802.11n can sustain maximum data rates

and improved overall performance at signiﬁcantly greater distances.

The XAP-1030 features Luxul’s XenSmart™ web based management interface.

XenSmart provides a powerful, yet simple method for setting up and optimizing

the wireless network. The XAP-1030 is also XenConnect™ enabled for optimal per-

formance and installation simplicity when deployed together with Luxul Routers,

Gigabit Switches, and other Luxul products.

XAP-1030 Features:

XImplements Patented Xen3D™ Technology for Enhanced Throughput and

Coverage

XHighest FCC Approved Performance (Effective EIRP 36dBm) for Farther Reaching

Signal and Maximum Data Rates

X18dB of Receive Gain Increases Client Device Network Sensitivity and

Performance

XComplies with 2.4 GHz IEEE 802.11n Standard. Backward Compatible with IEEE

802.11g/b

XSupports WMM QoS Functionality to Prioritize Multimedia Trafﬁc

XEnhanced Multi-Level Security with WPA-PSK (TKIP, AES, TKIP & AES), WPA2-PSK

(AES), WPA-PSK/WPA2-PSK Personal (TKIP & AES) and 128-bit WEP

XSupports up to 8 SSIDs with Individual Security Settings

XMultiple SSIDs Support VLAN Tagging (1 VLAN per SSID)

XSingle Cable Installation with PoE (supports both IEEE 802.3af and Legacy)

XFirmware Upgradeable

XEasy 3 Step Setup through Web-based XenSmart™ User Interface

User Guide

XInstalls Directly on a Wall or Shelf; or Can be Placed Discreetly in a Closet or

Other Non-Public Area

XXenConnect™ Enabled for Maximum Compatibility and Performance with Other

Luxul Xen Products

1.1 Warnings

XRead all installation instructions and site survey reports, and verify correct equip-

ment installation before connecting the XAP-1030 to its power source.

XRemove jewelry and watches before installing this equipment.

XVerify that the unit is grounded before connecting it to the power source.

XVerify that any device connected to this unit is properly wired and grounded.

XConnect all power cords to a properly wired and grounded electrical circuit.

XVerify that the electrical circuits have appropriate overload protection.

XAttach only approved power cords to the device.

XVerify that the power connector and socket are accessible at all times during the

operation of the equipment.

XDo not work with power circuits in dimly lit spaces.

XDo not install this equipment or work with its power circuits during thunder-

storms or other weather conditions that could cause a power surge.

XVerify there is adequate ventilation around the device, and that ambient tem-

peratures meet equipment operation speciﬁcations.

XProducts outside the approved conﬁgurations may be in violation of Part 15 of

the FCC Rules.

1.2 Site Preparation

XConsult your site survey and network analysis reports to determine speciﬁc

equipment placement, power drops, and so on.

XAssign installation responsibility to the appropriate personnel.

XIdentify and document where all installed components are located.

XProvide a sufﬁcient number of power drops for your equipment.

XEnsure adequate, dust-free ventilation to all installed equipment.

XIdentify and prepare Ethernet and console port connections.

XVerify that cable lengths are within the maximum allowable distances for optimal

and certiﬁed signal transmission.

User Guide

2 XAP-1030 SPECIFICATIONS

Standards IEEE 802.11n

IEEE 802.11b/g

IEEE 802.3af

Hardware LAN Port: 1 RJ45 10/100 Mbps data and power input

5dBi Omnidirectional Dipole Antenna

System LEDs: Power, WLAN active, LAN link/activity,

Bridge mode active.

RJ45 Connection LEDs: The RJ45 connection on the top

of the unit has two LEDs that indicate power and LAN

link/activity.

RF Information Frequency Band: 2.401 – 2.473GHz

Operating Channels: 11

Available Transmit Power 2.401 – 2.473GHz (IEEE802.11g/n):

Up to 36dBm EIRP

w30dBm @ 6~9Mbps / MCS0

w29dBm @ 12~18Mbps / MCS1-2

w27dBm @ 24~36Mbps / MCS3-4

w26dBm @ 48~54Mbps / MCS5-7

2.401 – 2.473GHz (IEEE802.11b):

Up to 36dBm EIRP

w30dBm @ 1~11Mbps

Available Receive Gain  2.401 – 2.473GHz (IEEE802.11g/n):

Up to 18dBm

2.401 – 2.473GHz (IEEE802.11b):

Up to 18dBm

Receive Sensitivity

(Typical)

2.401 – 2.473GHz (IEEE802.11n): Up to -91dBm

2.401 – 2.473GHz (IEEE802.11g): Up to -92dBm

2.401 – 2.473GHz (IEEE802.11b): Up to -93dBm

Wireless Operation Modes Access Point

Point-to Point Wireless Bridge

Point-to-Multipoint Wireless Bridge

Management and Security XenSmart™ Remote Web-based Management

WEP (128 bit)

WPA-PSK (TKIP, AES, TKIP&AES)

WPA2-PSK (AES)

WPA-PSK/WPA2-PSK Auto (TKIP&AES)

Web Based Firmware Upgrade

QoS: Wireless Multi-Media (WMM) Extensions

Certiﬁcations FCC Part 15, Class B

User Guide

Power Requirements Ethernet POE in: 48VDC/0.375A for IEEE 802.3af

Compliance

Power Consumption: 5W Nominal, 13W Max

Temperature Range Operating: -4°F to 140°F (-20°C to 60°C)

Storage: -40°F to 158°F (-40°C to 70°C)

Operating Humidity 5% to 95% (Non-condensing)

Mechanical Access Point Dimensions WxHxD: 7”(177.8mm) x

4”(101.6mm) x 1.25”(31.75mm)

Weight Item: 1.2 lbs

With Packaging: 2 lbs

3 GETTING STARTED

3.1 System Requirements

XDevices Supporting 802.11b, 802.11g or 802.11n

XWeb Browser (Microsoft IE 7.0 and up, Mozilla Firefox 1.0 and up, Safari 1.0 and up,

Google Chrome 5.0 and up)

XCAT5 Ethernet Cable

XAC Power Socket (100 – 240 V, 50/60 Hz)

XInternet Connection to View Documentation Online

3.2 Package Contents

XXAP-1030 Wireless Access Point

X5dBi Dipole Antenna

XPOE Injector, Power Adapter, Noise Suppresser

XFour Rubber Feet for Desktop Mounting

XQuick Install Guide

NOTE: If any of the listed items are missing or damaged, please contact

the reseller from whom you purchased for return/replacement.

3.3 Safety Information

To maintain the safety of users and property, follow these safety instructions:

XThe XAP-1030 wireless access point is designed for indoor use only. DO NOT

place this access point outdoors. If you require an outdoor access point, please

consider the Luxul XAP-1040.

XDO NOT install this access point in or near hot or humid places, such as a kitchen

or bathroom. Take care to minimize exposure to excessive heat or moisture.

User Guide

XDO NOT pull any connected cable with force. When disconnecting cables, do so

by disconnecting ﬁrst from the access point. When reconnecting, connect the AP

ﬁrst and then the Power/data source.

XWhen installing the access point, be sure it is ﬁrmly secured.

XAccessories of this access point, such as mounting screws, the POE injector and

power supply may be dangerous to small children under 3 years of age. KEEP All

ACCESSORIES OUT OF THE REACH OF CHILDREN!

XThe access point may become hot when in use for extended time periods. This is

normal and is not a malfunction. DO NOT install this access point where it will

be exposed to paper, cloth or other ﬂammable materials. If not using the electri-

cal box included with the unit, ALWAYS use a properly shielded and UL listed

electrical box for installation.

XThe XAP-1030 contains no user-serviceable parts. If the access point is not

working properly, contact your dealer and ask for help. DO NOT attempt to

disassemble the access point.

4 HARDWARE FEATURES AND INSTALLATION

The XAP-1030 high powered access point is designed for optimal performance as

well as for simple and efﬁcient installation and setup. It implements Luxul’s Xen3D™

high performance technology and is packaged for installation on a shelf or wall. It

can also be placed discreetly in a closet, attic or other non-public area. Note that

the signal generated by the XAP-1030 is Omnidirectional and the unit should be

placed in a location that is central to the desired coverage area. The XAP-1030 is

optimal for use in single level or two level installations where the network access is

centrally located, the desired coverage area is substantially the same distance on all

sides (i.e. square) and the total area does not exceed 5,000 square feet.

4.1 Front View

On the front of the XAP-1030 are 4 LEDs. LEDs indicate 1) Power, 2) LAN Link/

Activity, 3) WLAN Status and 4) Bridge Mode.

User Guide

XAP-1030 Front View

Status Indicators:

The XAP-1030 has four LEDs, positioned horizontally on the bottom right side of

the front of the access point. When viewed left to right, LEDs are as follows: 1)

Power (Green); 2) LAN Link/Activity (Amber); 3) WLAN Status (Blue); and 4) Bridge

Mode (Green).

The following table describes the LED functionality:

Indicator

Name

Description

PWR

(Power)

On The wireless radio is active and wireless access is

enabled an active connection to the internet

Off The wireless radio is not active and wireless

access is disabled

LAN

(LAN Status

Link/Activity)

On There is an active Ethernet connection

Flashing Indicates Ethernet activity

Off There is no active Ethernet connection

User Guide

Indicator

Name

Description

WLAN

(Wireless

LAN Status)

On The wireless radio is active and wireless access is

enabled an active connection to the internet

Off The wireless radio is not active and wireless

access is disabled

BRG

(Bridge Mode)

On Bridge Mode is enabled

Off The AP is in default “Access Point” mode.

At startup, the Green Power LED will stay on while the amber LAN Link light

ﬂashes. The blue LED will come on once the XAP-1030 radio is active.

4.2 Top View

The Top of the XAP-1030 provides one SMA antenna connector and one RJ-45 con-

nection that is used to deliver both power and data to the access point.

XAP-1030 Top View

4.3 Rear View

The Rear of the XAP-1030 has two key holes to allow for easy and ﬂexible mounting

on a wall or other solid surface. For desktop or shelf mounting, it also has guides

for placement of the four rubber feet provided.

XAP-1030 Rear View

Andere Handbücher für XAP-1030

Inhaltsverzeichnis

Andere Luxul Drahtloser Zugangspunkt Handbücher

Luxul

Luxul XAP-1020 Bedienungsanleitung

Luxul

Luxul XWO-BKT1 Bedienungsanleitung

Luxul

Luxul XAP-1030 Bedienungsanleitung

Luxul

Luxul XAP-1020 Bedienungsanleitung

Luxul

Luxul XAP-810 Bedienungsanleitung

Luxul

Luxul XAP-1030 Bedienungsanleitung

Luxul

Luxul Xen XAP-1040 Bedienungsanleitung

Luxul

Luxul XAP-1030 Bedienungsanleitung

Luxul

Luxul XAP-1500 Bedienungsanleitung

Luxul

Luxul XWO-BAP1 Bedienungsanleitung

Luxul

Luxul XAP-1020 Bedienungsanleitung

Luxul

Luxul XWO-BAP1 Bedienungsanleitung

Luxul

Luxul Xen XAP-1040 Bedienungsanleitung

Luxul

Luxul XAP-1510 Bedienungsanleitung

Luxul

Luxul Xen XAP-1040 Bedienungsanleitung

Luxul

Luxul XAP-1010 Bedienungsanleitung

Luxul

Luxul XAP-1500 Bedienungsanleitung

Luxul

Luxul Xen XAP-1230 Bedienungsanleitung

Luxul

Luxul XAP-1240 Bedienungsanleitung

Luxul

Luxul Xen XAP-103 Bedienungsanleitung

Luxul

Luxul XAP-1240 Bedienungsanleitung

Luxul

Luxul XWS-1310 Bedienungsanleitung

Luxul

Luxul Xen XAP-1040 Bedienungsanleitung

Luxul

Luxul XAP-310 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung