Lyngdorf Audio SDA-2400 Bedienungsanleitung

Lyngdorf Audio SDA-2400 – Owner’s manual

FORSIDE

LYNGDORF AUDIO SDA-2400

OWNER’S

MANUAL

Lyngdorf Audio SDA-2400 – Owner’s manual

CONTENTS:

WELCOME ................................................................................................................................................................. 3

COMPLIANCE ............................................................................................................................................................. 3

WHAT IS IN THE BOX .................................................................................................................................................. 4

FRONT PANEL ............................................................................................................................................................ 5

REAR PANEL .............................................................................................................................................................. 5

CONNECTION GUIDE .................................................................................................................................................. 6

CLEANING AND MAINTENANCE ................................................................................................................................. 7

TECHNICAL ASSISTANCE ............................................................................................................................................. 7

Lyngdorf Audio SDA-2400 – Owner’s manual

Welcome

Congratulations on your purchase of the SDA-2400 digital stereo power amplifier. With this purchase, you

have joined the ranks of an elite group of people who believe that perfect sound is more than a luxury. It’s a

requirement. The SDA-2400 will deliver an audio experience that will far exceed your expectations. We thank

you for placing your confidence in Lyngdorf.

For more in-depth information about the technologies used in Lyngdorf Audio products, please visit

www.lyngdorf.com.

Compliance

WEEE

The European Parliament and the Council of the European Union have issued the Waste Electrical and

Electronic Equipment Directive. The purpose of the Directive is to prevent waste of electrical and electronic

equipment and to promote reuse, recycling, and other forms of waste recovery. Lyngdorf products and the

accessories packed with them are subject to the WEEE Directive. Please dispose of any waste materials in

accordance with your local recycling regulations. Products and equipment which must be collected for reuse,

recycling, and other forms of recovery are marked with the icon of the crossed-out waste receptacle.

FCC

Lyngdorf products and accessories comply with parts 15 and 68 of the FCC rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept

any interference received, including any interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment. Equipment marketed to a consumer must can comply with the

necessary regulations in the configuration in which the equipment is marketed.

Lyngdorf Audio SDA-2400 – Owner’s manual

What is in the box

SDA-2400

Accessories

Mains cord

Trigger cable

Owner’s manual

Lyngdorf Audio SDA-2400 – Owner’s manual

Front panel

Operate indicates the operational status of the SDA-2400:

• Strong light – The SDA-2400 is operationg normally.

• Flashing – The SDA-2400 is in standby mode.

Rear panel

1. Trigger in and out

In order to control the power state from another product (ex: pre-amplifiers or media players) with trigger

control, the SDA-2400 is equipped with 3.5 mm mono mini jack sockets.

• If there is a plug in the “Trigger In” socket with no voltage applied, the SDA-2400 is in standby mode.

• If a DC voltage of 5-24V or a 50Hz AC voltage of 4-17Vrms is applied, the SDA-2400 will go into

Operate mode.

• “Trigger Out” is for daisy-chaining other SDA-2400s and controlling them all by the same signal.

Connect the control signal to “Trigger In” on the first SDA-2400 and connect its “Trigger Out” to

“Trigger In” on each subsequent unit.

2. Power state

As the SDA-2400 has an extremely low power consumption in standby mode, there is no on/off switch on the

front of the product. Instead, power is controlled automatically by the amplifier (this is bypassed with use of

trigger controls.)

Lyngdorf Audio SDA-2400 – Owner’s manual

“Low Power” means that the SDA-2400 will turn on automatically when it detects a signal on the selected

input. If a signal is not detected for around 30 minutes, the amplifier will go into standby mode. “On” will keep

the SDA-2400 permanently turned on. When a trigger cable is used, the Power State must be “On”.

3-4. Analog unbalanced and balanced input

For connection to products with analog output, you may only connect to one input at a time. The input

sockets are internally connected in parallel, so ALWAYS use EITHER the XLR inputs OR the phono inputs.

Do not use both at the same time, as this will induce noise.

5-6. Coaxial input and optical input

For connection to products with digital output, Coaxial (SPDIF) and Optical (Toslink) inputs are available.

7. Input select

Set the selector to the input in use.

8. Loudspeaker connectors

Connect your speakers to Left and Right connectors. The connectors allow for use of banana plugs and bare

wire up to 5mm2.

9. Voltage selector

The voltage selector must be in the position for your local mains supply.

10. Mains connector and switch

Be sure that the power cord is inserted firmly in the connector. The mains switch will remove the amplifier

from your mains power.

Connection guide

When connecting the speakers, always connect + and - from the

amplifier to the corresponding + and - terminals on the speaker.

Warning: Never run the SDA-2400 in so-called “bridge mode.”

Bridging the speaker output terminals will damage the amplifier.

Never connect speaker cables to ‘high-level’ inputs on a

subwoofer, as this will damage the SDA-2400.

Lyngdorf Audio SDA-2400 – Owner’s manual

Cleaning and maintenance

The SDA-2400 does not require any regular maintenance except to keep its exterior clean. Simply wipe it

with a clean, soft cloth. A small amount of non-abrasive cleaner on the cloth can be used to remove any dirt

or fingerprints. Do not use abrasive cleaners or cleaners containing liquid solvents.

Technical assistance

For the latest version of this manual, please check the Lyngdorf website: www.lyngdorf.com. If you have any

questions regarding your Lyngdorf product, please contact your nearest Lyngdorf representative or:

SL Audio A/S

Ulvevej 28

7800 Skive

Denmark

E-mail: contact@lyngdorf.com

Web: www.lyngdorf.com

Lyngdorf Audio SDA-2400 – Owner’s manual

Andere Handbücher für SDA-2400

Inhaltsverzeichnis

Andere Lyngdorf Audio Verstärker Handbücher

Lyngdorf Audio

Lyngdorf Audio DPA-1 RoomPerfect Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio SDA 2175 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio RoomPerfect TDA 2200 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio Room Perfect TDAI 2200 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio TDAI-2170 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio MkIV Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio TDAI-1120 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio TDAI-1120 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio TDAI-1120 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio SDAI 2175 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio TDAI-2170 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio TDAI-3400 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio SDA-2400 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio MP-60 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio DPA-1 RoomPerfect Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio TDAI-3400 Gebrauchs- und Wartungshandbuch

Lyngdorf Audio

Lyngdorf Audio MXA-8400 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio SDA-2400 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio Millennium MkIV Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio RoomPerfect TDA 2200 Bedienungsanleitung

Lyngdorf Audio

Lyngdorf Audio SDAI 2175 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung