7
User manual - True Vision Rusca English
An-reecve glass should be cleaned regularly on both sides. The cleaning frequency depends on the
degree of dirt. If the glass is not cleaned regularly, you run the risk that a clear “white” lm will appear,
that it will be very dicult to remove it and that the glass somemes never nds its original
transparency
Never leave dirt or stains on the glass. It is usually sucient to clean the glass with True Vision Clean
Glass Cleaner and a M-Design microber cloth.
This cleaning set is available from your authorized dealer.
It is also important to clean the window with True Vision Clean before rst use and to remove all traces
of dust and grease and make sure it is completely dry without leaving any marks. Use the M-Design mi-
crober cloth.
• Fingerprints are very visible on the glass, use gloves to hold the window.
• Always wipe the glass perfectly, leaving no trace of cleaning products.
• Brushing should be done with care: use enough liquid, rub gently and avoid pressure (no squeaking
on the glass),
• Be careful when removing dirt. Brush up and down to prevent the cleaning product from standing on
the window.
The following products are prohibited for cleaning an an-reecve glass
• Laundry salt or strong ammonia cleaner, eg toilet cleaner, coppe care product, fabric soener.
• Acids, for example hydrochloric acid.
• Detergents based on hypochloride, for example bleach, household products,
sodium hypochloride, chlorine
• Aggressive cleaning product, eg abrasive powder, abrasives, steel wool, scouring sponges, scrapers,
razor blades, rag with steel wire, scouring cloth, paper.
If the window is very dirty, it is advisable to “pre-clean” with True Vision Cleaner and a so paper towel.
Finish with the M-Design Microber Cloth for a completely dry and streak-free result.
Care of the microber cloth M-Design:
Wash regularly at 90 ° C. Never add bleach or fabric soener. When using bleach and fabric soener, the
specic properes of the M-Design microber cloth will be lost.
2.4.2. INSTRUCTION FOR CLEANING THE ANTI-REFLECTION WINDOW
2.4.1. IINSTRUCTIONS FOR CLEANING THE CERAMIC WINDOW
An appliance equipped with a ceramic glass must be cleaned regularly in accordance with
following instrucons:
• Make sure the device is cold, never clean a hot window.
• Open the window
• Use a so cloth (preferably microber) and a product type Instanet, Glassex
• The glass should be cleaned regularly on both sides. The cleaning frequency depends on the degree
of dirt. If the glass is not cleaned regularly, you run the risk that a clear “white” lm will appear, that
it will be very dicult to remove it and that the glass somemes never nds its original transparency.
• Always wipe the glass perfectly, leaving no trace of cleaning products.
• Fingerprints are very visible on the glass, use gloves to hold the window.
