M-system 15BX-4 Bedienungsanleitung

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN

Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp

EM-0691-4 Rev.5 P. 1 / 3

INSTRUCTION MANUAL

STANDARD RACK

(Fujitsu FCN type I/O connector) MODEL 15BX-4

BEFORE USE ....

Thank you for choosing M-System. Before use, please check

contents of the package you received as outlined below.

If you have any problems or questions with the product,

please contact M-System’s Sales Ofﬁce or representatives.

■PACKAGE INCLUDES:

Standard rack......................................................................(1)

■MODEL NO.

Conﬁrm Model No. marking on the product to be exactly

what you ordered.

■INSTRUCTION MANUAL

This manual describes necessary points of caution when

you use this product, including installation, connection and

basic maintenance procedures.

POINTS OF CAUTION

■POWER INPUT RATING & OPERATIONAL RANGE

• Locate the power input rating marked on the product and

conﬁrm its operational range as indicated below:

24V DC rating: 24V ±10%

■GENERAL PRECAUTIONS

• Before you remove the unit or mount it, turn off the power

supply for safety.

■ENVIRONMENT

• Indoor use.

• When heavy dust or metal particles are present in the

air, install the unit inside proper housing with sufﬁcient

ventilation.

• Do not install the base where it is subjected to continuous

vibration. Do not subject the unit to physical impact.

• Environmental temperature must be within -5 to +55°C

(23 to 131°F) with relative humidity within 30 to 90% RH

in order to ensure adequate life span and operation.

• Be sure that the ventilation slits are not covered with ca-

bles, etc.

■WIRING

• Do not install cables close to noise sources (relay drive

cable, high frequency line, etc.).

• Do not bind these cables together with those in which

noises are present. Do not install them in the same duct.

• Be sure to put the terminal cover on while the power is

supplied.

■AND ....

• The unit is designed to function as soon as power is sup-

plied, however, a warm up for 10 minutes is required for

satisfying complete performance described in the data

sheet.

COMPONENT IDENTIFICATION

Specifications

(side)

Body

MOUNTING REQUIREMENTS unit : mm (inch)

Observe appropriate wiring space over and under the rack.

450 (17.72)

4–M5 SCREW

465 (18.31)

57.2 (2.25)

< EIA >

15 (.59)

50 (1.97)

< JIS >

ANGLE BRACKET

15BX-4

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN

Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp

EM-0691-4 Rev.5 P. 2 / 3

TERMINAL CONNECTIONS

Connect the unit as in the diagram below.

■EXTERNAL DIMENSIONS unit: mm (inch)

168.5 (6.63)

465 (18.31)

99 (3.90)

2 (.08)

15 (.06)

480 (18.90)

435 (17.13)

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

8.5 (.33)

CN1

5-M4 POWER INPUT

TERMINALS

(1.30)

50 (1.97)

57.2 (2.25)

■CONNECTION DIAGRAM

CN1 +

–

POWER

■CONNECTOR PIN ASSIGNMENT

CN1: Fujitsu FCN-365P040-AU

PIN NO. CONVERTER PIN NO. CONVERTER

L O CAT. ASSIGN. LO C AT. ASSIGN.

A 1

B 1

1ch. 1

ch. 2

A11

B11

11 ch. 1

ch. 2

A 2

B 2

2ch. 1

ch. 2

A12

B12

12 ch. 1

ch. 2

A 3

B 3

3ch. 1

ch. 2

A13

B13

13 ch. 1

ch. 2

A 4

B 4

4ch. 1

ch. 2

A14

B14

14 ch. 1

ch. 2

A 5

B 5

5ch. 1

ch. 2

A15

B15

15 ch. 1

ch. 2

A 6

B 6

6ch. 1

ch. 2

A16

B16

16 ch. 1

ch. 2

A 7

B 7

7ch. 1

ch. 2

A17

B17

COM. (–)

A 8

B 8

8ch. 1

ch. 2

A18

B18

Not Used

A 9

B 9

9ch. 1

ch. 2

A19

B19

A10

B10

10 ch. 1

ch. 2

A20

B20

15BX-4

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN

Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp

EM-0691-4 Rev.5 P. 3 / 3

WIRING INSTRUCTIONS

■SCREW TERMINAL

Torque: 0.8 N·m

CHECKING

1) Terminal wiring: Check that all cables are correctly con-

nected according to the connection diagram.

2) Power input voltage: Check voltage across the power ter-

minals.

3) Installation & environment

LIGHTNING SURGE PROTECTION

M-System offers a series of lightning surge protector for

protection against induced lightning surges. Please contact

M-System to choose appropriate models.

Andere M-system E/A-System Handbücher

M-system

M-system R7C-DS4N Bedienungsanleitung

M-system

M-system R7D-TS4 Bedienungsanleitung

M-system

M-system R7F4HML3-D-DAC32B Bedienungsanleitung

M-system

M-system R3-SV16N Bedienungsanleitung

M-system

M-system R3Y-DC16 Bedienungsanleitung

M-system

M-system R7L-SV4 Bedienungsanleitung

M-system

M-system R3-DC64A Bedienungsanleitung

M-system

M-system R7 Series Bedienungsanleitung

M-system

M-system R7E-PA8 Bedienungsanleitung

M-system

M-system R3-SS8 Bedienungsanleitung

M-system

M-system R7L-DC16A Bedienungsanleitung

M-system

M-system R7C-DC8C Bedienungsanleitung

M-system

M-system R7D-RS4 Bedienungsanleitung

M-system

M-system R3-AS8 Bedienungsanleitung

M-system

M-system R8-DCM16ALZ Bedienungsanleitung

M-system

M-system Devicenet R7F4DD-DAC16C-H Bedienungsanleitung

M-system

M-system R3-SV4 Bedienungsanleitung

M-system

M-system Remote I/O R8 Series Bedienungsanleitung

M-system

M-system M5SN-AA Bedienungsanleitung

M-system

M-system R7D-YS2 Bedienungsanleitung

M-system

M-system R7F4HC-DAC32D-K Bedienungsanleitung

M-system

M-system R30SV4 Bedienungsanleitung

M-system

M-system R7C-EC16B Bedienungsanleitung

M-system

M-system R7F4HC-DA32-K Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung

WAGO

WAGO I/O-SYSTEM 750 Bedienungsanleitung