MacDon M1 Series Technisches Handbuch

M1 Series

Windrowers

Bluetooth Software Interface Kit (MD #208845)

Software Update Instructions

147867 Revision J

Original Instruction

The Harvesting Specialists.

M1240 Windrower, featuring Dual Direction™and Crossflex™suspension

1016391

Published: March 2020

The information in this publication is based on the information available and in effect at the time of printing. MacDon

Industries, Ltd. makes no representation or warranty of any kind, whether expressed or implied, with respect to the

information in this publication. MacDon Industries, Ltd. reserves the right to make changes at any time without notice.

Introduction

The Bluetooth®Software Interface kit (MD #208845) is required to update the master controller software on

M1 Series Windrowers. This document explains how to use this kit to perform software updates. Once the software has

been updated, the kit can be removed from the windrower and retained for future updates.

A list of parts included in the kit is provided in Chapter 2 Parts List, page 5.

Installation Time

Software update time is approximately 20 minutes.

Conventions

The following conventions are used in this document:

•Right and left are determined from the operator’s position, facing forward with the windrower in cab-forward position.

•Unless otherwise noted, use the standard torque values provided in the windrower operator’s or technical manual.

NOTE:

Keep your MacDon publications up to date. The most current version of this instruction can be downloaded from our

Dealer-only site (https://portal.macdon.com) (login required).

NOTE:

This document is currently available in English only.

147867 iRevision J

List of Revisions

At MacDon, we’re continuously making improvements, and occasionally these improvements affect product

documentation. The following list provides an account of major changes from the previous version of this document.

Section Summary of Change Internal Use

Only

Removed heading topic

Removed Option 1 for updating with Android

3.6.2 Updating Master Controller

Software on an Android Device,

page 38

Updated option 2 for updating with Android Product Support

147867 ii Revision J

147867 iii Revision J

Introduction ................................................................................................................................................i

List of Revisions...........................................................................................................................................ii

Chapter 1: Safety ........................................................................................................................................ 1

1.1 Signal Words .........................................................................................................................................1

1.2 General Safety .......................................................................................................................................2

Chapter 2: Parts List.................................................................................................................................... 5

Chapter 3: Installation Instructions ........................................................................................................... 7

3.1 Formatting USB Drive for Software Installation ............................................................................................7

3.2 Updating Harvest Performance Tracker Software .........................................................................................9

3.3 Installing the IQANsync Application ......................................................................................................... 15

3.3.1 Installing the IQANsync App –iOS ................................................................................................... 15

3.3.2 Installing the IQANsync App –Android............................................................................................. 17

3.4 Installing an IQAN G11 Bluetooth®Module ............................................................................................... 19

3.4.1 Updating Firmware on an IQAN G11 Bluetooth®Module –IOS ............................................................ 20

3.4.2 Updating Firmware on an IQAN G11 Bluetooth®Module –Android ...................................................... 24

3.5 Downloading Master Controller Software Update ...................................................................................... 29

3.6 Updating Master Controller Software....................................................................................................... 31

3.6.1 Updating Master Controller Software –iOS ...................................................................................... 31

3.6.2 Updating Master Controller Software on an Android Device ................................................................ 38

3.7 Removing an IQAN G11 Bluetooth®Module.............................................................................................. 44

TABLE OF CONTENTS

147867 1Revision J

Chapter 1: Safety

1.1 Signal Words

Three signal words, DANGER,WARNING, and CAUTION, are used to alert you to hazardous situations. Two signal words,

IMPORTANT and NOTE, identify non-safety related information. Signal words are selected using the following guidelines:

DANGER

Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury. It may also be

used to alert against unsafe practices.

CAUTION

Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may be used

to alert against unsafe practices.

IMPORTANT:

Indicates a situation that, if not avoided, could result in a malfunction or damage to the machine.

NOTE:

Provides additional information or advice.

147867 2Revision J

1.2 General Safety

1000004

Figure 1.1: Safety Equipment

CAUTION

The following general farm safety precautions should be part of

your operating procedure for all types of machinery.

Protect yourself when assembling, operating, and servicing

machinery, wear all protective clothing and personal safety

devices that could be necessary for the job at hand. Do NOT

take chances. You may need the following:

•Hard hat

•Protective footwear with slip-resistant soles

•Protective glasses or goggles

•Heavy gloves

•Wet weather gear

•Respirator or filter mask

1000005

Figure 1.2: Safety Equipment

•Be aware that exposure to loud noises can cause hearing

impairment or loss. Wear suitable hearing protection devices

such as earmuffs or earplugs to help protect against loud

noises.

1010391

Figure 1.3: Safety Equipment

•Provide a first aid kit in case of emergencies.

•Keep a properly maintained fire extinguisher on the machine.

Be familiar with its proper use.

•Keep young children away from machinery at all times.

•Be aware that accidents often happen when the Operator is

tired or in a hurry. Take time to consider safest way. NEVER

ignore warning signs of fatigue.

SAFETY

147867 3Revision J

1000007

Figure 1.4: Safety around Equipment

•Wear close-fitting clothing and cover long hair. NEVER wear

dangling items such as scarves or bracelets.

•Keep all shields in place. NEVER alter or remove safety

equipment. Make sure driveline guards can rotate

independently of shaft and can telescope freely.

•Use only service and repair parts made or approved by

equipment manufacturer. Substituted parts may not meet

strength, design, or safety requirements.

1000008

Figure 1.5: Safety around Equipment

•Keep hands, feet, clothing, and hair away from moving parts.

NEVER attempt to clear obstructions or objects from a

machine while the engine is running.

•Do NOT modify the machine. Unauthorized modifications

may impair machine function and/or safety. It may also

shorten the machine’s life.

•To avoid injury or death from unexpected startup of the

machine, ALWAYS stop the engine and remove the key from

the ignition before leaving the operator’s seat for any reason.

1000009

Figure 1.6: Safety around Equipment

•Keep service area clean and dry. Wet and/or oily floors are

slippery. Wet spots can be dangerous when working with

electrical equipment. Be sure all electrical outlets and tools

are properly grounded.

•Keep work area well lit.

•Keep machinery clean. Straw and chaff on a hot engine are

fire hazards. Do NOT allow oil or grease to accumulate on

service platforms, ladders, or controls. Clean machines before

storage.

•NEVER use gasoline, naphtha, or any volatile material for

cleaning purposes. These materials may be toxic and/or

flammable.

•When storing machinery, cover sharp or extending

components to prevent injury from accidental contact.

SAFETY

Andere Handbücher für M1 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MacDon Landwirtschaftliche Geräte Handbücher

MacDon

MacDon M1 Series Bedienungsanleitung

MacDon

MacDon R85 Bedienungsanleitung

MacDon

MacDon M205 Bedienungsanleitung

MacDon

MacDon M1240 Bedienungsanleitung

MacDon

MacDon M155 Bedienungsanleitung

MacDon

MacDon CA20 Bedienungsanleitung

MacDon

MacDon D65 Bedienungsanleitung

MacDon

MacDon M155 Bedienungsanleitung

MacDon

MacDon A30-D Bedienungsanleitung

MacDon

MacDon R216 Stücklistenhandbuch

MacDon

MacDon R216 Bedienungsanleitung

MacDon

MacDon R116 Bedienungsanleitung

MacDon

MacDon M205 2012 Bedienungsanleitung

MacDon

MacDon D50 Bedienungsanleitung

MacDon

MacDon M155E4 Bedienungsanleitung

MacDon

MacDon A30-D Bedienungsanleitung

MacDon

MacDon A30-S Bedienungsanleitung

MacDon

MacDon R113 Bedienungsanleitung

MacDon

MacDon D1X Series Bedienungsanleitung

MacDon

MacDon M155 Bedienungsanleitung

MacDon

MacDon FlexDraper FD2 Series Bedienungsanleitung

MacDon

MacDon R85 Bedienungsanleitung

MacDon

MacDon R85 Bedienungsanleitung

MacDon

MacDon A40-D Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung