Mainstays BH18-084-097-45 Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2018-04-09 Rev. 0001-A Factory: KONRIC

Steele Open AV Tower

Stock # BH18-084-097-44 Expresso

# BH18-084-097-45 White

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store

where it was purchased. Please call our customer service number and have your instructions and parts list

ready to provide the model name, part name or factory number:

866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenstyle.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASED: / /

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Steele Open AV Tower

MODEL # BH18-084-097-44 / BH18-084-097-45

MADE IN CHINA

1. Please read the Assembly Instructions prior to assembling the unit.

2. To avoid damage, assemble the unit on a sturdy, level and non-abrasive surface.

3. Keep all hardware part out of reach of children.

4. Please wait until all steps are completed before tightening bolts.

5. Make sure all bolts are tightly fastened before the unit is used.

MAXIMUM RECOMMENDED WEIGHT LOADS

MAXIMUM LOAD 50 lb (22.7 kg)

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE

MAXIMUM WEIGHTS INDICATED. USE WITH HEAVIER THAN THE MAXIMUM

WEIGHTS INDICATED MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.

GENERAL INFORMATION, TIPS

AND

TRICKS

MAXIMUM LOAD 20 lb (9.1 kg)

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert the Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making

sure Cam Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of

Cam Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.

You are now ready to assemble the unit.

FINAL

1 2 43

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (Qty. 1) B- Side Panel (Qty. 2)

C-Bottom Panel (Qty. 1) D- Partition Panel (Qty. 5)

E- Fixed Shelf (w/o cam lock) (Qty. 2) F- Fixed Shelf (with cam lock) (Qty. 2)

G- Bottom Back Support (Qty. 1) H- Bottom Left Support (Qty. 1) I- Bottom Right Support (Qty. 1)

Parts and Hardware List

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel (4) M10 x 40 mm Wood Dowel

(Qty. 16+1 extra) (Qty. 16+1 extra) (Qty. 4+1 extra) (Qty. 68+2 extra)

(5) M15 x 60 mm Wood Dowel (6) 1-3/4” Bolt

(Qty. 8+1 extra) (Qty. 8+1 extra)

(7) Lock Washer (8) Flat Washer (9) Plastic Cap

(Qty. 8+1 extra) (Qty. 8+1 extra) (Qty. 4)

(10) Small Plastic Cap Hex Wrench Glue

(Qty. 14+1 extra) (Qty. 1) (Qty. 1)

Touch-up Pen (Qty. 1) Tipping Restraint Hardware Kit (Qty.1)

(Not included for BH18-084-097-45) (Inside Plastic Bag)

Tools required: Hex wrench (provided) and Phillips screwdriver

and hammer

(not provided).

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts.

Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw 16 Cam Bolts (2) into the designated small holes on the Side Panels (B), Bottom Panel

Cam Bolt

(16 used in this step)

②

M8 x 30 mm Wood Dowel

(

2 used in this step

)

Assembly Instructions

3. Connect the Bottom Back Support (G) between the Bottom Side Supports (H and I) by engaging one

Wood Dowel (3) and one Cam Lock (1) in each end.

Cam Lock

(2 used in this step)

①

③

Assembly Instructions

4. Connect the Partition Panel (D) between the Fixed Shelves (F) by engaging four M10 Wood Dowel (4) in

each side.

M10 x 40 mm Wood Dowel

(

8 used in this step

)

④

Assembly Instructions

5.Attach the Partition Panel (D) to the previous assembly by engaging eight M10 Wood Dowels (4).

M10 x 40 mm Wood Dowel

(

8 used in this step

)

④

Assembly Instructions

6. Attach the Fixed Panel (E) to the Partition Panel (D) by engaging four M10 Wood Dowels (4).

7. Repeat the same procedure to attach the Fixed Panel (E) at the opposite end.

M10 x 40 mm Wood Dowel

(

8 used in this step

)

④

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Mainstays Inneneinrichtung Handbücher

Mainstays

Mainstays Twin Twin 4473719WE Bedienungsanleitung

Mainstays

Mainstays Z005.2318-MP Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-07 Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-05 Bedienungsanleitung

Mainstays

Mainstays MS17-D4-1007-09 Bedienungsanleitung

Mainstays

Mainstays GSB332197-2 Bedienungsanleitung

Mainstays

Mainstays CONRAD Series Bedienungsanleitung

Mainstays

Mainstays D2118.0001-MP Bedienungsanleitung

Mainstays

Mainstays CONRAD MS18-D1-1007-18 Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-09 Bedienungsanleitung

Mainstays

Mainstays 9544CHWM Bedienungsanleitung

Mainstays

Mainstays BUCKET Z005.2317-MP Bedienungsanleitung

Mainstays

Mainstays MSS129900298079 Bedienungsanleitung

Mainstays

Mainstays MS17-D1-1011-01 Bedienungsanleitung

Mainstays

Mainstays MSW-10003 Bedienungsanleitung

Mainstays

Mainstays CONRAD MS16-D4-1007-04 Bedienungsanleitung

Mainstays

Mainstays MS16-D4-1007-06 Bedienungsanleitung

Mainstays

Mainstays GSB332199-2 Bedienungsanleitung

Mainstays

Mainstays FULTON MS16-D4-1007-17 Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-04 Bedienungsanleitung

Mainstays

Mainstays GORDON MID CENTURY LOVESEAT MS18-D1-1007-47 Bedienungsanleitung

Mainstays

Mainstays MS17-D4-1007-08 Bedienungsanleitung

Mainstays

Mainstays CONRAD MS17-D4-1007-03 Bedienungsanleitung

Mainstays

Mainstays ARLO MS18-D1-1007-26 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung