Mainstays MS18-D2-1011-07 Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2018-04-09 Rev. 0001-A Factory: HESLTD

Mid-Century Audio Tower

Stock # MS18-D2-1011-07

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store

where it was purchased. Please call our customer service number and have your instructions and parts list

ready to provide the model name, part name or factory number:

866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenstyle.com

Or e-mail your request to parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASED: / /

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Mid-Century Audio Tower

MODEL # MS18-D2-1011-07

MADE IN CHINA

1. Please read the Assembly Instructions prior to assembling the unit.

2. To avoid damage, assemble the unit on a sturdy, level and non-abrasive surface.

3. Keep all hardware part out of reach of children.

4. Please wait until all steps are completed before tightening bolts.

5. Make sure all bolts are tightly fastened before the unit is used.

MAXIMUM RECOMMENDED WEIGHT LOADS

MAXIMUM LOAD 50 lb. (22.7 kg)

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE

MAXIMUM WEIGHTS INDICATED. USE WITH HEAVIER THAN THE MAXIMUM

WEIGHTS INDICATED MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.

GENERAL INFORMATION, TIPS

AND

TRICKS

MAXIMUM LOAD 20 lb. (9.1 kg)

IMPORTANT

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert the wood dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.

You are now ready to assemble the unit.

FINAL

1 2 43

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Left Side Panel (Qty. 1) B- Right Side Panel (Qty. 1)

C-Back Panel (Qty. 1) D- Top Panel (Qty. 1)

E- Fixed Shelf (Qty. 1) F- Bottom Panel (Qty. 1) G- Adjustable Shelf (Qty. 3)

H- Upper Crossbar (Qty. 1) I- Lower Crossbar (Qty. 1) J- Base (Qty. 1)

K- Leg (Qty. 4) L- Drawer Front Panel (Qty. 2) M- Drawer Left Side Panel (Qty. 2)

N- Drawer Right Side Panel O- Drawer Back Panel P- Drawer Bottom Support Q- Drawer Bottom Panel

(Qty. 2) (Qty. 2) (Qty. 2) (Qty. 2)

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Large Cam Lock (2) Cam Bolt (3) M6 x 30 mm Wood Dowel (4) M8 x 30 mm Wood Dowel

(Qty. 16+1 extra) (Qty. 26+1 extra) (Qty. 2+1 extra) (Qty. 18+1 extra)

(5) 2” Bolt (6) Lock Washer (7) Flat Washer

(Qty. 8+1 extra) (Qty. 8+1 extra) (Qty. 8+1 extra)

(8) Small Cam Lock (9) M4 x 38 mm Screw (10) M4 x 50 mm Screw

(Qty. 10+1 extra) (Qty. 20+1 extra) (Qty. 4+1 extra)

(11) M3.5 x 15 mm Washer Head Screw (12) Cam Lock Cover (13) Shelf Pin

(Qty. 26+1 extra) (Qty. 4+1 extra) (Qty. 12+1 extra)

Hex Wrench (Qty. 1) Glue (Qty. 1) Tipping Restraint Hardware Kit (Qty.1)

(Inside Plastic Bag)

Tools required: Hex wrench (provided) and Phillips screwdriver

and hammer

(not provided).

Drawer Assembling

1. Unpack the unit and confirm that you have all the hardware and required parts.

Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Securely screw 5 Cam Bolts (2) into the designated small holes on the Drawer Front Panel (L).

3. Attach Drawer Left and Right Side Panels (M and N) to one Drawer Front Panel (L) by engaging four

Small Cam Locks (8) (Refer to page 3 on Cam Lock system operation supplement).

Small Cam Lock

(

4 used in this step

)

⑧

Cam Bolt

(5 used in this step)

②

Drawer Assembling

4. Connect the Drawer Bottom Support (P) to the Drawer Front Panel (L) by engaging one Wood Dowel (3)

and one Small Cam Lock (8).

M6 x 30 mm Wood Dowel

(1 used in this step)

③

Small Cam Lock

(1 used in this step)

⑧

Drawer Assembling

5. Slide one Drawer Bottom Panel (Q) into the grooves between the Drawer Side Panels (M and N) until

fully inserted into the groove of the Drawer Front Panel (L).

Drawer Assembling

6. Fasten the Drawer Back Panel (O) to the Drawer Side Panels (M and N) and the Drawer Bottom Support

(P) with six 38 mm Screws (9). Make sure that Drawer Bottom Panel (Q) fits securely into the groove of

the Drawer Back Panel (O). Tighten all the screws with a Phillips screwdriver.

7. Repeat the same procedure to assemble the other drawer.

M4 x 38 mm Screw

(6 used in this step)

⑨

Assembly Instructions

8. Securely screw the Cam Bolts (2) into the designated small holes on the Side Panels (A and B), the Top

Panel (D) and the Fixed Shelf (E) using a Phillips screwdriver.

Cam Bolt

(16 used in this step)

②

Inhaltsverzeichnis

Sprachen:

Andere Mainstays Inneneinrichtung Handbücher

Mainstays

Mainstays MS89-010-092-40 Bedienungsanleitung

Mainstays

Mainstays MS55-018-039-23 Bedienungsanleitung

Mainstays

Mainstays TM240302 Bedienungsanleitung

Mainstays

Mainstays CONRAD MS17-D4-1007-03 Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-04 Bedienungsanleitung

Mainstays

Mainstays 108695TS Bedienungsanleitung

Mainstays

Mainstays MS18-D1-1007-16 Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-05 Bedienungsanleitung

Mainstays

Mainstays MS16-D4-1007-08 Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-09 Bedienungsanleitung

Mainstays

Mainstays FULTON MS16-D4-1007-17 Bedienungsanleitung

Mainstays

Mainstays BH18-084-097-45 Bedienungsanleitung

Mainstays

Mainstays MS16-D4-1007-14 Bedienungsanleitung

Mainstays

Mainstays MS16-D4-1007-11 Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-01 Bedienungsanleitung

Mainstays

Mainstays GSB332197-2 Bedienungsanleitung

Mainstays

Mainstays MS16-D4-1007-06 Bedienungsanleitung

Mainstays

Mainstays MS18-D1-1007-14 Bedienungsanleitung

Mainstays

Mainstays 9544CHWM Bedienungsanleitung

Mainstays

Mainstays MS16-D4-1007-01 Bedienungsanleitung

Mainstays

Mainstays ADIRONDACK TM024252W Bedienungsanleitung

Mainstays

Mainstays CONRAD Series Bedienungsanleitung

Mainstays

Mainstays MS17-D1-1011-01 Bedienungsanleitung

Mainstays

Mainstays MS98-010-088-02 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung