Mainstays GSDB21002-1 Bedienungsanleitung

MAINSTAYS

Industrial Long Dresser

Stock # GSDB21002-1

25-30minutes

approx assembly time

Two adults

Assembly required

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

For assistance with assembly or installation, parts and customer

service , call 1-888-568-3818 Monday-Friday 8:30am-5:30pm

PST (U.S)

Email: customerservice.s@goldenspecies.com

Working hour: Mon.-Fri., 8:30am - 5:30pm Pacific Standard

Time.

Stock # GSDB21002-1

Lot Number : _________

Date Purchased ______/____/_____

Manufactured By : Young Chain Company Limited

Binh Duong Province, Vietnam

TEL : 1-888-568-3818

EMAIL : customerservice.s@goldenspecies.com

We are available to assist you Monday-Friday

From 8:30am-5:30pm PST (US)

MAXIMUM LOAD 55 LB (25 KG)

SHELF MAXIMUM

LOAD

20 LB (9.09 KG)

BASE MAXIMUM

LOAD 30 LB

(13.64 KG)

DRAWERS MAXIMUM

LOAD 10 LB (4.54 KG)

Review your purchases, thank you!

Share your feedback to help other shoppers

Link for this product is as below:

www.walmart.com/ip/608033996

MAINSTAYS

Industrial Long Dresser

Stock # GSDB21002-1

Manufactured By : Young Chain Company Limited

Binh Duong Province, Vietnam

TEL : 1-888-568-3818

EMAIL : customerservice.s@goldenspecies.com

We are available to assist you Monday-Friday

From 8:30am-5:30pm PST (US)

Important Safety Information

Please read all instructions carefully before assembling this furniture.

For your safety, assembly by two or more adults is strongly recommended.

Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware

could jeopardize the structural integrity of the item.

Hardware may loosen overtime. Periodically check that all connections are tight.

NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly

recommend installation of the anti-tip kit included with this product.

General Information, Tips & Tricks

Remove all parts and hardware from the box. Place all items on a carpeted or scratch-free work

surface, as this will avoid damaging parts during assembly.

The shipping box provides an ideal work surface.

To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or

contents of the shipping carton until assembly is complete.

Use the parts and hardware lists below to identify and separate each of the pieces included.

The use of power tools for assembly is not recommended. Power tools can damage the hardware

and/or split the wood

Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to misalign during assembly.

Safety and care

It is advisable to dust frequently with a clean, soft, dry, lint-free cloth. Clean the surface by

rubbing in the direction of the grain.

Do not place furniture in direct sunlight and keep furniture at least 60 cm / 2 ft from heat

sources to avoid fading.

DO NOT USE POWER DRILL / DRIVERS FOR INSERTING

SCREWS / BOLTS AS THIS COULD DAMAGE THE UNIT.

ONLY USE HAND SCREWDRIVERS.

Help and support

For assistance with assembly or installation, parts and customer service ,

call 1-888-568-3818 Monday-Friday 8:30am-5:30pm PST (U.S)

Email: customerservice.s@goldenspecies.com

Working hour: Mon.-Fri., 8:30am - 5:30pm Pacific Standard Time.

PARTS

ATOP

×1

BBASE

×1

C D

E F G H

IJK L

M N O P

LEFT SIDE

PANEL ×1

RIGHT SIDE

PANEL ×1

PARTITION

×1

LEFT BACK

PANEL ×1

RIGHT BACK

PANEL ×1

MIDDLE BAR

×1

DRAWER FRONT

PANEL ×4

SIDE METAL

FRAME ×2

CROSS BAR

×2

DRAWER LEFT

PANEL ×4

DRAWER RIGHT

PANEL ×4

DRAWER BACK

PANEL ×4

DRAWER BOTTOM

PANEL ×4

SUPPORT BAR

×4

DOOR

×1

SHELF

×2

VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING Page 3

CAM LOCK

×56+1

CAM BOLT

×56+1

DOWEL

×24+1

BUCKLE

×8

LONG FLAT

HEAD SCREW

×24+1

ROUND HEAD

SCREW ×16+1

STICKER PVC

×20+1

HANDLE

×5

ALLEN WRENCH

×1

SMALL BOLT

×10

SHORT BOLT

×8+1

SPRING WASHER

×22+1

LONG BOLT

×14+1

FLAT WASHER

×22+1

DOOR HINGE

×2

SHORT FLAT

HEAD SCREW

×12+1

DOOR BLOCK

×1

SHELF PIN

×8+1

SMALL ROUND

HEAD SCREW

×2+1

BRACKET

×2

2 3 41

6 7 85

10 11 129

14 15 1613

18 1917

ANTI-TIP CABLE

×1

LONG SCREW

×1

SHORT SCREW

×1

PLASTIC ANCHOR

×1

VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING Page 4

HARDWARE LIST

Anti-tip Hardware

TOOLS NEEDED

FOR ASSEMBLY

(NOT PROVIDED)

1. Screw the cam bolt into the predrilled panel. The cam bolt should be tightened

so no threads are visible.

2. The larger ring of the cam should touch the panel.

3. Insert the cam lock into the predrilled hole in the panel. Arrow faces the

outside of the panel.

4. Connect the previously tightened cam bolt with the panel connected into the

cam lock.

5. Using a flat head screw driver, turn the cam lock halfway clockwise to secure

the cam bolt.

6. FAILURE TO PROPERLY SECURE THE CAM LOCK AND CAM BOLT COULD RESULT

IN PRODUCT INSTABALITY AND FAILURE.

Page 5

CAM FASTEN SYSTEM EXAMPLE

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

RING SHOULD

TOUCH THE BOARD

1 2 3

45 6

11. Align the SIDE METAL FRAME ( Q ) with the CROSS BAR ( R ) and then insert the SIDE

METAL FRAME ( Q ) into the CROSS BAR ( R ).

2. And then use the ALLEN WRENCH ( 10 ) to secure the FLAT WASHER ( 13 ), SPRING

WASHER ( 12 ) and SHORT BOLT ( 11 ) to attach the SIDE METAL FRAME ( Q ) with the

CROSS BAR ( R ). Tighten the SHORT BOLT ( 11 ).

Page 6

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

ALLEN WRENCH

×1

SHORT BOLT

×8

SPRING WASHER

×8

FLAT WASHER

×8

10 11 12 13

ASSEMBLY

21. Align the pre-assembled metal feet to the corresponding hole of the BASE ( B ).

2. And then use the ALLEN WRENCH ( 10 ) to secure the FLAT WASHER ( 13 ) ,

SPRING WASHER ( 12 ) and LONG BOLT ( 14 ) to attach the SIDE METAL FRAME

( Q ) and CROSS BAR ( R ) to the BASE ( B ). Tighten the LONG BOLT ( 14 ).

** Note: Use the adjustable levelers to level the Industrial long dresser if needed.

Page 7

ASSEMBLY

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

ALLEN WRENCH

×1

SPRING WASHER

×14

FLAT WASHER

×14

10 12 13

LONG BOLT

×14

31. Turn over the BASE ( B ) like the figure shown below.

2. Insert the CAM BOLT ( 1 ) into the corresponding hole of the BASE ( B ). And use a

hand screwdriver to tighten the CAM BOLT ( 1 ) clockwise.

ASSEMBLY

Page 8

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

DO NOT USE POWER DRILL / DRIVERS

FOR INSERTING SCREWS / BOLTS

AS THIS COULD DAMAGE THE UNIT.

ONLY USE HAND SCREWDRIVERS.

CAM BOLT

×11

41. Place the TOP ( A ) face down on a smooth soft surface. The side with the holes

should be facing up.

2. Insert the CAM BOLT ( 1 ) into the corresponding hole of the TOP ( A ). And use a

hand screwdriver to tighten the CAM BOLT ( 1 ) clockwise.

ASSEMBLY

Page 9

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

CAM BOLT

×11

51. Place the LEFT SIDE PANEL ( C ) face down on a smooth soft surface. The side with

the holes and glides should be facing up.

2. Insert the CAM BOLT ( 1 ) into the corresponding hole of the LEFT SIDE PANEL ( C ).

And use a hand screwdriver to tighten the CAM BOLT ( 1 ) clockwise.

ASSEMBLY

Page 10

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

CAM BOLT

×5

Inhaltsverzeichnis

Sprachen:

Andere Mainstays Inneneinrichtung Handbücher

Mainstays

Mainstays MSW-10003 Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-05 Bedienungsanleitung

Mainstays

Mainstays MS1036174116001 Bedienungsanleitung

Mainstays

Mainstays 4059019WE Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-07 Bedienungsanleitung

Mainstays

Mainstays Conrad MS16-D4-1007-05 Bedienungsanleitung

Mainstays

Mainstays MS18-D1-1007-16 Bedienungsanleitung

Mainstays

Mainstays CONRAD MS16-D4-1007-04 Bedienungsanleitung

Mainstays

Mainstays MS13-092-921-45 Bedienungsanleitung

Mainstays

Mainstays MS3336132978 Bedienungsanleitung

Mainstays

Mainstays Z005.2318-MP Bedienungsanleitung

Mainstays

Mainstays BUCKET Z005.2317-MP Bedienungsanleitung

Mainstays

Mainstays Queen Bedienungsanleitung

Mainstays

Mainstays GSH052135 Bedienungsanleitung

Mainstays

Mainstays GORDON MS18-D1-1007-46 Bedienungsanleitung

Mainstays

Mainstays FULTON MS16-D4-1007-17 Bedienungsanleitung

Mainstays

Mainstays MS16-D4-1007-08 Bedienungsanleitung

Mainstays

Mainstays 4061019WE Bedienungsanleitung

Mainstays

Mainstays MS16-D4-1007-06 Bedienungsanleitung

Mainstays

Mainstays Entertainment Center Bedienungsanleitung

Mainstays

Mainstays BUCHANNAN Bedienungsanleitung

Mainstays

Mainstays CONRAD MS17-D4-1007-01 Bedienungsanleitung

Mainstays

Mainstays ARLO MS18-D1-1007-26 Bedienungsanleitung

Mainstays

Mainstays MS1209200152 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung