Major tech MT941 Bedienungsanleitung
MT941
Professional Multifunction
Enviroment Meter
2
1. Introduction …………………………………………………………………… 4
2. Features ………………………………………………………………………… 4
3. General Specifications …………………………………………………….. 5
4. Manometer Specification ….………………………..………………….… 5
5. Button Specifications …………………………………………………….… 6
6. Display Icon Description ………………………………………………….. 7
7. Changing Setup Options ……………………………………………….…. 8
7.1. Setup Options …………………………….……….............……. 8
7.2. Entering or exiting Setup …........…………………………….. 8
7.3. Changing a Setup Option …........…………………………….. 8
7.4. Temperature Unit …………........……………………….…….... 8
7.5. Light Unit ……………………........……………..……….……….. 9
7.6. Sound Unit ……………………........……………….....…………. 9
7.7. Offset ……………………………........…...........………..………. 9
7.8. Velocity Unit ……………….….........……………………….……. 10
7.9. Flow Unit …………………………........……..………….…….….. 10
7.10. Area Unit ………………………........……………….….……….. 11
7.11. Area Size ………………………........………….…….….….…… 11
7.12. Auto Power Off Mode ……………........………….……..…… 12
7.13. Measuring RH% &Temperature ……........…………….…. 12
7.14. Measuring K-Type Temperature ……….........….…………. 13
7.15. Measuring Sound ……………….…………........…………..... 13
7.16. Measuring Light ………………………………........…………… 13
7.17. Measuring Air Velocity & Air Flow ………........………….. 13
7.18. Holding the Displayed Reading ……………........………… 14
7.19. Viewing the MIN, MAX, and AVG Reading ….........…… 14
8. Replacing the Batteries ……………………………………………….…… 14
Contents Page
3
1. Introduction
ŸThe 5 in 1 digital Multifunction Environment Meter has been
designed to combine the functions of a Sound Level Meter, Light
Meter, Humidity Meter, Temperature Meter and CFM/CMM Thermo-
Anemometer. It is an ideal Multifunction Environment Meter with
scores of practical applications for professional and home use.
ŸThe Sound level function can be used to measure noise in factories,
schools, offices, home, etc, checking acoustics of studios,
auditoriums and hi-fi installations.
ŸThe Light function is used to measure luminance in the field. It is
fully cosine corrected for the angular incidence of light. The light
sensitive component used in the meter is a very stable, long life,
silicon diode.
ŸThe Humidity/Temperature uses a humidity/semiconductor sensor
and K-type thermocouple.
ŸCFM/CMM Thermo-Anemometer is suitable for use in a wide variety
of applications, including plant maintenance operations,
environmental analysis, fume hood testing, and HVAC system
assessments.
2. Features
Congratulations on your purchase of the MT941 Professional Multifunction
Enviroment Meter
ŸLarge LCD display with backlight.
ŸMAX, MIN and AVG measurements.
ŸDisplay shows Sound, Light, K-Type Temperature, Humidity &
Temperature as well as Air Velocity & Air Flow simultaneously.
ŸElectronic Offset function allows compensation of thermocouple
errors to maximize overall accuracy.
ŸThe device measures air velocity, it features 5 selectable units of
velocity measure: m/s, ft/min, km/h, MPH, knots, and it features 2
selectable units of flow measure: CFM, CMM.
ŸEasy to set Area dimension (up to 6 points) for air flow
measurement.
ŸUSB interface, USB to UART Bridge Controller.
ŸLow battery indication, Auto Power Off (Sleep mode) adjustable.
4
Operating Conditions
Storage Conditions
Power Supply
Low Battery Indicator
Accessories
0 to 50 °C
-10 to 60 °C
1 x 9V Battery
Yes
9V Battery and K-Type temperature, humidity probe,
light probe, sound probe, anemo probe and carrying
case.
3. General Specifications
Function Range Resolution
Accuracy
Sound Level
Light
Humidity and
Temperature
K type
Temperature
Air Velocity
Air Flow
30dB-130dB
20000Lux
5%-98%RH
10~30°C
(50~86°F)
-30~9.99°C
(-22~50°F)
31~60°C
(88~140°F)
-99.9~99.9°C
(-148~212°F)
-100~-200°C
(-148~-328°F)
100~1372°C
(212~2502°F)
(0.40~30)m/s
(196~5900)ft/min
(3.6~108.0)km/h
(2.2~67.0)MPH
(1.9~58.0)Knots
(0~999900)CFM
(0~999900)CMM
0.1
0.1,1,10
0.1
0.1
0.01
1
0.1
0.1
0.1
0.001~100
0.001~100
0.1,1
0.1,1
±3.5dB at 94dB Sound level 1KHz sine wave
±(5+10d)
±3.5%RH
±1°C/±1.8°F
±3%±0.20m/s
±3%±40 ft/min
±3%±0.8 km/h
±3%±0.4 MPH
±3%±0.4 Knots
accuracy is function of velocity and area
±2°C /±3.6°F
± [1.5%rdg +2°C(3.6°F)]
± [1.5%rdg + 1°C (1.8°F)]
4. Manometer Specification
5
1. Press the button to turn the meter ON/OFF.
2. Press the button to step through the maximum, minimum, and
average readings. To exit the MAN/MIX/AVG mode, press the button
for 2 seconds to return to normal operation.
3. Press the button to switch between the temperature (humidity
Probe) and the K-Type temperature settings in the primary.
4. Press the button to freeze or unfreeze the displayed readings. The
meter is in area setup option, press the button to change the station
of flashing digit.
5. Press the button to switch between the Light, Sound, Air Flow and
Humidity settings in the secondary display.
6. Press the button to turn on the backlight. Press it again to turn
off the backlight. Press the button for 2 seconds to start or exit
Setup. (See "Changing Setup Options.")
7. When secondary readings show the Sound, press the button to
switch between FAST and SLOW mode. When secondary readings show
the Light, press the button for 2 seconds to zero the Light. When the
meter is in Setup mode, press the button to enter a setup option and
press the button again to store the displayed setting in memory.
8. Press the button to change the units of the primary display. In Setup
mode, press the button to scroll to the Setup option you want to
change or press the button to increase the displayed setting.
9. Press the button to change the units of the secondary display. In
Setup mode, press the button to scroll to the Setup option you want
to change or press the button to decrease the displayed setting.
5. Button Specifications
HOLD
HOLD
6
1. Temperature (Humidity Probe), K-Type Temperature and Air Velocity
modes are active in primary display
2. Area Indication
3. Light, Sound, Air Flow and Humidity Modes are active in Secondary
Display
4. The Secondary Display
5. Sound of Fast or Slow Mode
6. Data Hold Indicator
7. REC, MAX, MIN and AVG Indicators.
8. Units of Sound (dBA/ dBC) in Secondary Display
9. Units of Light (LUX/ FC) in Secondary Display
10. K-Type Temperature Offset Option, OFFSET Display.
11. Entering or Exiting Setup Mode
12. Multiplier (x 10 orx 100)
13. Units of Flow (CFM/CMM) in Secondary Display
14. Units of Humidity in Secondary Display
15. The Indication of Meter Communicating to PC
16. Units of Area
17. Units of velocity
18. Multiplier (x10)
19. Units of Temperature
20. Low Battery Indicator
21. Auto Power OFF Mode Indicators
22. The Primary Display
6. Display icons Description
7
Use Setup to choose Temperature, Light, Sound, Air Velocity, Air Flow,
Area, K-Type offset and sleep mode setting. The meter stores the settings
in its memory.
Function
Temperature Unit
Function Function
TEMP Unit Set Temperature Unit (°C or °F)
Light Unit LIGHT Unit Set Light Unit (LUX or FC)
Sound Unit SOUND Unit Set Sound Unit (dBA or dBC)
Offset K-Type OFFSET K-type Temperature offset
Units of velocity VEL Unit Set Velocity Unit(five unit)
Units of Flow FLOW Unit Set Flow Unit (CFM or CMM)
Units of Area AREA Unit Set Area Of Unit (in² or cm² or ft²)
Size of Area AREA Size Set Area Of Measuring Air Flow
Sleep Mode SLP Yes or No
7.2. Entering or Exiting Setup
7. Changing Setup Options
7.1. Setup Options
When the meter is in Setup mode, the display shows SETUP
Press the button for 2 seconds to start or exit Setup.
7.3. Changing a Setup Option
7.4. Temperature Unit
To change the temperature unit, enter TEMP Unit setup
operation. Press the or button until the display show °C or °F.
Press the button, to store the new setting in the memory.
1. Press the or button to scroll to the setup option you want to
change.
2. Press the button to change the setting.
3. Press the or button until the setting you want to use appears on
the display. Press to store the new setting in the memory.
Note: Setup is disabled in MIN MAX/AVG mode.
8
To change the Light unit, enter LIGHT Unit setup operation.
Press the or button until the display shows LUX or FC,
Press the button, to store the new setting in the memory.
7.5. Light Unit
To change the sound unit, enter SOUND Unit setup operation.
Press the or button until the display shows dBA or dBC.
Press the button, to store the new setting in the memory.
7.6. Sound Unit
The secondary display shows the temperature and the offset.
The primary display shows the offset. You can store individual offsets for
K-Type temperature. Press the or button to increase or decrease offsets.
Press the button, to store the new setting in the memory.
7.7. Offset
9
To change the velocity unit, enter VELOCITY Unit setup operation.
Press the or button until the display shows the unit you want to change.
Press the button, to store the new setting in the memory.
7.8. Velocity Unit
To change the flow unit, enter the FLOW Unit setup operation.
Press the or button until the display shows CFM or CMM.
Press the button, to store the new setting in the memory.
7.9. Flow Unit
Note: ● m/s — meters per second ● km/h — kilometers per hour
● ft/min — feet per minute ● MPH — miles per hour
● knots — nautical miles per hour
Note: ● CFM (ft3/min) = Air Velocity(ft/min) x Area(ft2)
● CMM (m3/min) = Air Velocity(m/s) x Area(m2) x 60
● CFM: cubic feet per minute
● CMM: cubic meters per minute
10
Andere Handbücher für MT941
1
Inhaltsverzeichnis
Andere Major tech Messgerät Handbücher
Major tech
Major tech MT767 Bedienungsanleitung
Major tech
Major tech MT945 Bedienungsanleitung
Major tech
Major tech MT785 Bedienungsanleitung
Major tech
Major tech MT960 Bedienungsanleitung
Major tech
Major tech MT975 Bedienungsanleitung
Major tech
Major tech MT957 Bedienungsanleitung
Major tech
Major tech MTD15 Bedienungsanleitung
Major tech
Major tech MTD75T Bedienungsanleitung
Major tech
Major tech MT760 Bedienungsanleitung
Major tech
Major tech MT950 Bedienungsanleitung
Major tech
Major tech MT930 Bedienungsanleitung
Major tech
Major tech TRUERMS MTD80 Bedienungsanleitung
Major tech
Major tech MT95 Bedienungsanleitung
Major tech
Major tech MT150 Bedienungsanleitung
Major tech
Major tech MT766 Bedienungsanleitung
Major tech
Major tech MTD70T Bedienungsanleitung
Major tech
Major tech MT935 Bedienungsanleitung
Major tech
Major tech MT713 Bedienungsanleitung
Major tech
Major tech MT876 Bedienungsanleitung
Major tech
Major tech MT 770 Bedienungsanleitung
