Makita 9067 Handbuch
TECHNICAL INFORMATION
For Models
Standard equipment
Optional accesories
Product
CONCEPTION AND MAIN APPLICATIONS
8500 rpm
6600 rpm
6000 rpm
Outer dia.:180mm(9") X Arbor dia.:22.23mm(7/8") X Thickness:6mm(1/4")
Outer dia.:230mm(7") X Arbor dia.:22.23mm(7/8") X Thickness:6mm(1/4")
9067/9067S
9067/9067L/9067S
9069/9069S
9067L/9069/9069S
9067L/9069
No load speed
Depressed
center wheel
Specifications
Voltage (V) Current(A) Cycle(Hz) Input Max. output(W)
Output
115 15
9.6
9.2
8.8
50/60 1650
2000
2000
2000
900
1100
1100
1100
2600
2900
2900
2900
220 50/60
230 50/60
240 50/60
458mm(18")
139mm(1/2")
200mm(7-7/8") --- 9067/9067L/9067S
Description
Continuous Rating(W)
Net weight 4.2Kg(9.3lbs)
Cord length 2.5m(8.2ft)
Feautures and benefits
9067, 9067L, 9067S, 9069, 9069S
180mm/230mm Angle Grinders
These models are angle grinders of wheel size
180mm/230mm(7"/9") designed as economy type
of sister models of Model 9047/9049 series.
By suppressing maximum output of motor, Torque
limiter is not neccessary for these models.
Model 9067S/ 9069S are with soft start function
versions of Model 9067/9069.
Model 9067L is low speed version of Model 9067.
(for only U.S.A. and Canada)
Lock nut wrench 35
Lock nut wrench 28 (9067L/9069: for only U.S.A. and Canada)
<Note> The standard equipment may differ from country to country.
9067/9067L/9067S Super Flange,
Depressed center wheel 24P/36P,
Inner Flange78 (for cutting wheel), Outer Flange78 (for cutting wheel)
Wire Cup Brush 110 ,
Grip set (loop handle)
9069/9069S Super Flange,
Depressed center wheel 24P/36P,
Inner Flange 78 (for cutting wheel), Outer Flange78 (for cutting wheel)
Wire Cup Brush110,
Grip Set (loop handle)
1. Double insulated
2. See the sheets attached for more information
250mm(9-7/8") --- 9069/9069S
Large spindle lock
Shape is suitable for
handling easily by
finger with glove.
Better dust protection
Gear housing may be
re-attached at every 90
°
Ball bearings with higher dust sealing and labyrinth structure
at both end of armature and outside of spindle
Long life motor
Large trigger switch
9067,9067L,9067S,9069,9069S
9067 9069 9049
9069S9067S
180mm(7") 230mm(9")
2,000 2,300
360
8,500 6,600
560
90
4.8Kg
10.6lbs
4.2Kg
9.3lbs
4.9Kg
10.8lbs
5.1Kg
11.2lbs
5.5Kg
12.1lbs
5.8Kg
12.8lbs
91
3 points (upper/right/left)
9049S9047S
9067L 9047 9047L
Model
MAKITA
A
B
Wheel diameter(mm)
Torque limiter
No load noise (dB)
Grip attach position
No load speed (rpm)
Input (W) [230V]
Net weight
Lock torque (kgf-cm)
[230V]
without
soft start
with
soft start
8,500 6,600
6,000 (for U.S.A and Canada)
6,000 (for U.S.A and Canada)
3 points (upper/right/left)
No Yes
180mm(7") 230mm(9")
Comparison chart
<Note> Net weight A ----- without Wheel, Wheel cover, Inner flange, Locknut, Grip and Power supply cord
Net weight B ----- without Power supply cord andDep ressed center wheel.
Repair
1. Replacing Spiral bevel gear (in replacing, if there is a trouble in Ball bearing, it should be replaced too)
1) Remove Depressed center wheel and Wheel cover.
2) Remove Tapping screw CT5x16 fixing Bearing box.
2. Assembling of Bearing box
When assembling, be careful so that grease may not stick to Tapping screw bind CT5x16.
Disassemble or assemble as the following illustrations;
IR 217
Height: 15mm(5/8")
or more
Spiral Bevel Gear 49
for 9067/9067S
Spiral Bevel Gear 50
for 9069/9069S/9067L
Inside diameter
20mm or more
Bearing box
IR030
Labyrinth ring
Press-fit deeply being
careful not to damage it
Outside diameter
40mm or less
Disassemblig Assembling
Press Spindle
by Arbor press
Receive Ring using U
part of Arbor press
Ø23~25mm
Ø65mm or more
Ø17.2mm
Tapping screw bind CT5x16
3. Replacing Armature
1) Remove Depressed center wheel and Wheel cover.
2) Remove Carbon brushes.
3) Remove Tapping screws fixing Gear housing and Motor h ousing.
Gear housing
Retaining ring
(axis)S-9
Spiral bevel gear 15 for 9067/9067S
Spiral bevel gear 12 for 9069/9069S/9067L
Ball bearing 6301DDW Bearing retainer
Match incision part of Baffle plate
and rib of Motor housing
Motor housing
Baffle Plate
Armature
Tapping screw
Hex. socket head
bolt M5x10
Carbon brush
Brush Holder Cap
Wiring diagram
<9067S, 9069S>
<9067, 9069, 9067L>
<NOTE> Noise suppressor is not used for all countries.
Power supply cord
Switch
Switch
Noise
suppressor
Noise
suppressor
P1
1
P2
Power supply cord
P1
P2
Receptacle sleeve Insulated connector
Insulated connector
Insulated connector
Insulated connector
Receptacle sleeve
2
1
2
1 1
5
2
Black
Black
Resistance
Purple
Purple
Purple
Purple
Black
Black
Field
Field
Orange
Orange
Orange
Orange
2
22
1 1
2
Andere Handbücher für 9067
8
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Makita Schleifer Handbücher
Makita
Makita GA4540R Bedienungsanleitung
Makita
Makita GA4540C Bedienungsanleitung
Makita
Makita BGA402 Bedienungsanleitung
Makita
Makita 9553NB Bedienungsanleitung
Makita
Makita 9556HP Bedienungsanleitung
Makita
Makita 9563H Bedienungsanleitung
Makita
Makita 9300 Bedienungsanleitung
Makita
Makita 9015B Bedienungsanleitung
Makita
Makita 9015DB Bedienungsanleitung
Makita
Makita MGA400 Bedienungsanleitung
Makita
Makita 9556HN Bedienungsanleitung
Makita
Makita GD0603 Bedienungsanleitung
Makita
Makita GA7060 Bedienungsanleitung
Makita
Makita GD0800C Bedienungsanleitung
Makita
Makita DGA468 Bedienungsanleitung
Makita
Makita M9509 Bedienungsanleitung
Makita
Makita GA005G Bedienungsanleitung
Makita
Makita GD0601 Bedienungsanleitung
Makita
Makita M9501 Bedienungsanleitung
Makita
Makita GA7030 Bedienungsanleitung
