Malmbergs Elektriska AB, PO Box 144, SE-692 23 Kumla, SWEDEN
Phone:
+46
(0)19-58
77
00
Fax:
+46
(0)19-57
11
77
[email protected] www
.malmbergs.com
E. SPECIFICATIONS
Voltage: 220-240V, 50/60Hz.
Wattage: Max 500W incandescent lamp, 150W fluorescent lamp.
Detection range: 120º and max 12 meters.
Duration: From 10+5 second to 4+1 minutes.
Lux control level: From daylight to darkness.
C. ADJUSTING THE LUX LEVEL
Remove the surface cover again. The built-in
photocell of the Lux control module detects
daylight ( ) and darkness ( ). You can set
the unit to operate at your desired Lux level.
Adjusting the duration
The length of time that remains switched on
after activation can be adjusted from 10+5
seconds to 4+1 minutes.
Replace the surface cover again.
D. IMPORTANT NOTES
1. The Sensor Switch is for indoor use only.
Do not use it outdoors.
2. The Sensor Switch is more sensitive to
motions across the front of the sensor
than towards it.
3. The sensor detects heat in motion and
heat sources that change temperature
quickly. Therefore, to avoid false trig-
gering, do not place the Sensor Switch
facing air-conditioners, heaters, and
other sources of heat or cold.
Duration
Adjusting screw
Lux level
Adjusting screw
Diagram C
