Manhattan 179195 Bedienungsanleitung

HI-SPEED USB TO

SATA /IDE ADAPTER

USER MANUAL

MODEL 179195

MAN-179195-UM-0313-09

manhattan-products.com

INTRODUCTION

Thank you for purchasing the Manhattan®Hi-Speed USB to SATA/IDE Adapter,

Model 179195.

This convenient device connects SATA, SATA-enhanced, IDE and enhanced-IDE

hard disks to desktop and notebook computers using a USB port. And with its

convenient built-in, one-touch copy feature, you can more easily transfer, share

and back up les or store large le archives on external drives.

By following the instructions in this user manual, you’ll soon be enjoying these

popular features:

• Supports data transfer SATA speeds up to 1.5 Gbps and Hi-Speed USB speeds

up to 480 Mbps

• Supports 48-bit LBA (Logical Block Addressing)

• Fits external SATA and IDE hard drives up to 5.25”

• Plug and Play – Windows, Mac and Linux compatible and hot-swappable

• Lifetime Warranty (For a complete list of country-specic warranties, go to

manhattan-products.com/warranty.)

System Requirements

• Available USB type-A port

• Windows XP/Vista/7

Package Contents

• Hi-Speed USB to SATA/IDE Adapter

• USB cable, 80 cm (31.5 in.)

• 4-pin power cable, 10 cm (4 in.)

• Power adapter, 1.5 m (59 in.)

• Software CD with user manual; multilanguage quick install guide

USB cable

4-pin power cable

Power adapter

HARDWARE INSTALLATION

1. Always connect the Hi-Speed USB to SATA/IDE Adapter to the HDD port rst,

then to the computer’s USB port. NOTE: If using the included 4-pin internal

power cable instead, turn off the PC before connecting. Windows will detect a

new device and automatically install the driver.

2. To verify the connection, go to Start / Control Panel / Device Manager. Open

“Hard disk controllers” to display the newly added hard disk drive.

3. If connecting to a new hard disk drive, use Device Manager or enter the

command <diskpart> to initialize and set its capacity. Format the HDD using

standard procedures. If its icon appears on the desktop but you can’t nd it

listed, check the following:

• The HDD has been properly installed; and

• The HDD is set in the Master position.

SOFTWARE INSTALLATION

These steps are for the installation of the convenient one-touch backup software.

NOTE: This software doesn’t support Mac operating systems. Some images may

look different on your computer, as your software version may be slightly different

than the one represented here.

1. Load the included software CD. The PC Clone EX setup wizard’s Welcome

screen will display automatically. Click “Install” to continue.

2. When the License and Warranty Agreement displays, click “Agree” to continue.

3. Enter the desired pathway for the installation or click “Browse” to nd a current

folder. Click “Install” to continue.

4. The nal Setup screen will display a progress status bar. When nished, the

wizard will display an “Install complete!” message. Click “OK” to exit the wizard.

Install Complete!

5. The PC Clone EX icon will appear in the system tray. To open the program, you

can double-click the icon or right-click to display the menu option for selection.

CREATING PARTITIONS

NOTE: If the hard drive you have placed in the enclosure (the drive that you are

copying data to) has already been partitioned, you can proceed to the next section.

With the adapter plugged into a USB port on your computer and powered

on (see

Hardware Installation above), right-click My Computer on your desktop and go

to Manage. (Or go to Start / Control Panel / Administrative Tools / Computer

Management.)

2. In the left-hand le directory, click/select “Disk Management” so its screen

displays on the right. Right-click on the disk identied as “Unallocated,” then

click/select “New Partition...” from the pop-up menu. NOTE: To conrm that the

drive you’ve placed in the enclosure is indeed the unallocated disk, disconnect

the USB cable and see if the corresponding “Unallocated” text disappears.

3. With the Format Partition screen displayed, select your preferred settings, then

click “Next” to continue.

OPTION: An alternative pathway for accessing the formatting options is through

Start on your desktop, then All Programs / PCCloneEX / FNet FAT32 Format. The

formatting details and instructions will appear on the screens that display.

FAT32 FORMAT UTILITY

With the increases in drive capacities, the FAT32 Format Utility in older operating

systems is unable to support data transfers in excess of 32 GB. The solution is

to use the FNet formatting utility on the enclosed CD, which can quickly format a

disk for as much as 4 TB (4,000 GB). Note that all data already on the disk will be

deleted.

Connect the HDD to the adapter and turn on the computer.

2. Open PC Clone EX and select Visit FNet.

Show PCClone EX

Visit FNet

3. Conrm that the elds for USB Device and Drive to Format display your

preferences and click Start.

4. Select “Quick Format” and click Start. Remember, all data previously loaded

on the receiving HDD will be deleted.

5. A Status screen will display the progress of the formatting.

6. When the Format Complete message displays, click OK. The selected disk has

been formatted with the FAT32 le system.

ONE-TOUCH BACKUP FUNCTION

To use any of the features available with this function, be sure the adapter is

plugged into a USB port on your computer and powered on, and that a backup

drive has been properly loaded in the enclosure. NOTE: Before backing up les

for the rst time using this device, it’s recommended that the function parameters

be set on the File Backup Settings screen in the PC Clone EX

program.

1. With the PC Clone EX program open and the disk connected to

the adapter (see Hardware Installation above), press the Back Up

button on the adapter.

2. A Files Backup Conrm screen will display. Click Backup to continue.

3. While the backup procedure is in progress, the PC Clone EX icon will ash in

the system tray and a status uplate will display every 10 seconds until the

backup is complete.

Quick Launch

The Quick Launch screen displays automatically when the PC Clone EX program

is opened. From here, you can directly execute the File Backup function by clicking

on the boxed icon (5 in the image below) or select one of the other menu options:

1Quick Launch

2 File Backup

3 File Manager

4Setup

5 Quick File Backup

6Minimize

7About

8Help

Andere Handbücher für 179195

Inhaltsverzeichnis

Andere Manhattan Adapter Handbücher

Manhattan

Manhattan 507578 Bedienungsanleitung

Manhattan

Manhattan 100854 Bedienungsanleitung

Manhattan

Manhattan 166713 Bedienungsanleitung

Manhattan

Manhattan 179195 Bedienungsanleitung

Manhattan

Manhattan 153355 Bedienungsanleitung

Manhattan

Manhattan Serial ExpressCard/34 Bedienungsanleitung

Manhattan

Manhattan 150705 Bedienungsanleitung

Manhattan

Manhattan 179195 Bedienungsanleitung

Manhattan

Manhattan 179072 Bedienungsanleitung

Manhattan

Manhattan 506847 Bedienungsanleitung

Manhattan

Manhattan 100892 Bedienungsanleitung

Manhattan

Manhattan 150859 Bedienungsanleitung

Manhattan

Manhattan 152341 Bedienungsanleitung

Manhattan

Manhattan 179980 Bedienungsanleitung

Manhattan

Manhattan 179195 Bedienungsanleitung

Manhattan

Manhattan 506847 Bedienungsanleitung

Manhattan

Manhattan 152341 Bedienungsanleitung

Manhattan

Manhattan 406192 Bedienungsanleitung

Manhattan

Manhattan 158015 Bedienungsanleitung

Manhattan

Manhattan 525510 Bedienungsanleitung

Manhattan

Manhattan 150859 Bedienungsanleitung

Manhattan

Manhattan 151825 Bedienungsanleitung

Manhattan

Manhattan IMPORT LINK 406222 Bedienungsanleitung

Manhattan

Manhattan 179089 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung