Manitowoc GROVE GMK3060 Bedienungsanleitung

Maintenance manual

3 302 574 en

03.11.2017

Important note

Any type of duplication or excerpt from this

document, even in electronic form, is not subject

to the revision service of

Manitowoc Crane Group Germany GmbH.

3 302 574 en Maintenance manual

GMK3060

Manitowoc Crane Group Germany GmbH

Industriegelände West

D-26389 Wilhelmshaven, Germany

Tel: [+49] (0)44 21 294-0

Fax: +[49] (0) 44 21 294-301

The passing on or duplication of this document as well as the utilisation and disclosure of its contents is prohibited unless

expressly permitted. Infringement will incur liability for compensation. All rights pertaining to registration of patent or utility

model are reserved. The original language of this document is German.

Additional page 3 302 704 en 1

GMK truck cranes

11.01.2018

Depending on the type of truck crane, a slewing angle sensor of type (A) or

(B) can be installed on the slewing bearing.

Version (A)

For this version, the specifications in the supplied maintenance manual apply.

Version (B)

Deviating from the specifications in the maintenance manual supplied,

this version of the slewing angle sensor is maintenance-free.

Only use the telephone number 04160234 if in need of spare parts.

Slewing angle sensor

Version (A) and (B)

11.01.2018

2 3 302 704 en Additional page

GMK truck cranes

Blank page

03.11.2017

Maintenance manual 3 302 574 en

GMK3060

Contents:

1 General instructions

2 Safety and environmental protection

3 Cleaning

4 Run-in regulations

5 Maintenance overview

6 Lubricants and consumables

7 Maintenance work on the carrier

8 Maintenance work on the superstructure

9 Longer out of service periods

10 Torques

11 Spare parts required for maintenance

Appendix

This maintenance manual does not replace the operating manual.

Details of operation and standard safety instructions

can be found in the operating manual.

03.11.2017

3 302 574 en Maintenance manual

GMK3060

Blank page

03.11.2017

Maintenance manual 3 302 574 en

GMK3060

1 General instructions

1.1 Using the maintenance manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

1.2 Warnings and symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

1.3 Maintenance instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

1.4 Instructions regarding the electronic controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 4

1.5 Safety instructions for welding work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 4

1.6 Definition of direction information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5

1.7 Conversion table for US measuring units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6

03.11.2017

3 302 574 en Maintenance manual

GMK3060

General instructions

1.1 Using the maintenance manual

03.11.2017

Maintenance manual 3 302 574 en 1 - 1

GMK3060

1General instructions

1.1 Using the maintenance manual

This maintenance manual is not designed to replace proper training and

instructions!

Maintenance personnel for this truck crane must have the relevant, specialist

knowledge and that of proper safety procedures!

Please read Chapters 1 and 2 carefully before beginning maintenance work.

HMaintenance work on the lattice extensions is described in the Lattice

extension operating manual.

1.2 Warnings and symbols

The following definitions and symbols are used in the operating instruc-

tions to highlight particularly important information:

The vertical line to the left of the text indicates that: This text, regardless of

its length, relates to the warning symbol.

GThis symbol indicates hazards related to the described operation, which

can endanger persons. The type of danger (e.g. life-threatening, personal

injury, risk of crushing or electric shocks) generally precedes the warning

sign.

SDangers which could put objects at risk are pointed out here, e.g. damage

to the truck crane or the load.

OThis symbol is to remind you that you are working with substances which

pose a risk to the environment. Take particular care.

The measures required for the corresponding maintenance work are

indicated next to the symbol. You will find more detailed information in

Section Handling substances that are harmful to the environment, p. 2 - 4.

General instructions

1.3 Maintenance instructions

1 - 2 3 302 574 en Maintenance manual

GMK3060

03.11.2017

HThe hand with the pointing finger indicates passages that contain additional

instructions and tips regarding truck crane operation.

sThis symbol indicates that the topic is continued on the next page. Turn to

the next page!

1.3 Maintenance instructions

This maintenance manual is intended for maintenance personnel.

The maintenance manual does not contain information on repair work.

Repair work may only be carried out by a qualified repair crew

(e.g. Manitowoc Crane Care).

Repair work also requires:

– appropriate workshop equipment,

– special tools and

– Spare parts approved by Manitowoc Crane Group Germany GmbH.

It is your responsibility to maintain and service the truck crane regularly and

carefully in order to extend its service life and keep it in good working order.

Manitowoc Crane Group Germany GmbH can only uphold the warranty

provided for the truck crane if the following conditions are met:

– It is used for the purpose for which it was intended,

– Care and maintenance are carried out as prescribed,

– Repair work/overhauling is carried out by professionals.

Andere Handbücher für GROVE GMK3060

Inhaltsverzeichnis

Andere Manitowoc Baumaschinen Handbücher

Manitowoc

Manitowoc Grove GRT880 Bedienungsanleitung

Manitowoc

Manitowoc Grove RT9150E Bedienungsanleitung

Manitowoc

Manitowoc 15000 3 Series Bedienungsanleitung

Manitowoc

Manitowoc MLC300 Installations- und Benutzerhandbuch

Manitowoc

Manitowoc MLC650 Bedienungsanleitung

Manitowoc

Manitowoc Grove RT540E Bedienungsanleitung

Manitowoc

Manitowoc 999 Installations- und Benutzerhandbuch

Manitowoc

Manitowoc National Crane NBT40-1 Series Bedienungsanleitung

Manitowoc

Manitowoc GROVE GMK7450 Bedienungsanleitung

Manitowoc

Manitowoc Grove RT9130E-2 Bedienungsanleitung

Manitowoc

Manitowoc GROVE GMK 5095 Bedienungsanleitung

Manitowoc

Manitowoc GROVE GMK 6400 Bedienungsanleitung

Manitowoc

Manitowoc 18000 Bedienungsanleitung

Manitowoc

Manitowoc National Crane NBT50L Series Bedienungsanleitung

Manitowoc

Manitowoc Grove GRT8120 Bedienungsanleitung

Manitowoc

Manitowoc National Crane NC1400H Bedienungsanleitung

Manitowoc

Manitowoc 2250 Bedienungsanleitung

Manitowoc

Manitowoc Grove 5540F Bedienungsanleitung

Manitowoc

Manitowoc Grove CD3340B Bedienungsanleitung

Manitowoc

Manitowoc National Crane 1300A Installations- und Benutzerhandbuch

Manitowoc

Manitowoc 2250 MAX-ER 2000 Bedienungsanleitung

Manitowoc

Manitowoc 18000 Bedienungsanleitung

Manitowoc

Manitowoc MLC300 Bedienungsanleitung

Manitowoc

Manitowoc NATIONAL CRANE 900A Bedienungsanleitung

Beliebte Baumaschinen Handbücher anderer Marken

SASFORKS

SASFORKS EXTREME Bedienungsanleitung

Hailo

Hailo H-50 Bedienungsanleitung

Graco

Graco LineLazer ES 1000 Gebrauchs- und Pflegehandbuch

Greenlee

Greenlee 555RSC Bedienungsanleitung

Lux Tools

Lux Tools A-FMR-20 Set Bedienungsanleitung

SIP

SIP 03683 Bedienungsanleitung

Volvo

Volvo L30G Bedienungsanleitung

Grizzly

Grizzly G8712 Bedienungsanleitung

Modulift

Modulift CMOD 12 Bedienungsanleitung

Case

Case DV201 Bedienungsanleitung

Sealey

Sealey SC10.V2 Bedienungsanleitung

Wacker Neuson

Wacker Neuson DT05 Bedienungsanleitung

HYVA

HYVA AMCO VEBA 81 Series Bedienungsanleitung

Atlas Copco

Atlas Copco Dynapac V5100TV Bedienungsanleitung

Toro

Toro 323 Bedienungsanleitung

SGS

SGS EC1500 Bedienungsanleitung

Saferoad

Saferoad VR Arcus Primus 90 Series Bedienungsanleitung

Turbosol

Turbosol BM 30 Bedienungsanleitung