Marantz SR7010 Bedienungsanleitung

MODEL: SR7010

Model Information

INTEGRATED NETWORK AV RECEIVER

MI112116E3-1

I/R Codes

Product Specifications

Upgrades/Updates

Accessories

Reset Procedure

Warranty

Remote Control

Rear Panel

Front Panel

NOTE:

This edition is missing the link to the IR codes…………………………………………………………………….. 11/21/2016

Model Information

Index

Protection History

Display Mode

Front Panel

 Power operation button ( )

Used to turn the power of the MAIN ZONE

(room where this unit is located) on/off

(standby).

 Power indicator

This is lit as follows according to the power status:

•Off: Power on

•Red: Normal standby

•Orange:

•When “HDMI Pass Through” is set to “On”

•When “HDMI Control” is set to “On”

•When “IP Control” is set to “Always On”

HOME Buttons and Display exposed when the door is

Open (1 of 3) 2

INPUT SELECTOR knob

This selects the input source.

Main display

This displays various pieces of information.

Remote control sensor

This receives signals from the remote control unit.

VOLUME knob

This adjusts the volume level.

Door

When you are using buttons and/or connectors

behind the door, press the bottom of the door to

open it. Be careful not to catch your fingers

when closing the door.

A-DSX

WithThe Door Open (1 of 3)

HOME

FRONT PANEL Buttons and Display exposed when the door is

Open (2 of 3) 3

Sub display

This displays various pieces of information.

BACK button

This returns to the previous screen.

Cursor buttons ()

These select items.

ENTER button

This determines the selection.

SETUP button

This displays the menu on the TV screen.

DYNAMIC EQ button

This switches the Dynamic EQ settings.

PURE DIRECT button/indicator

This switches the sound mode between Direct, Pure Direct and

Auto.

This lights when the Pure Direct mode is selected as the sound

mode.

M-DAX button/indicator

This enables the M-DAX mode.

This lights when the M-DAX mode is selected.

Dynamic Volume button (DYNAMIC VOL)

This switches the Dynamic Volume settings.

WithThe Door Open (2 of 3)

HOME Buttons and Display exposed when the door is

Open (3 of 3)

Buttons and Display exposed when the door is

Open (2 of 3) 4

MOVIE button

This switches the sound mode to “Movie”.

MUSIC button

This switches the sound mode to “Music”.

GAME button

This switches the sound mode to “Game”.

Audyssey DSX® button (A-DSX)

This switches the Audyssey DSX® settings.

Speaker A/B switching button (SPKR A/B)

This sets the front speakers to use.

HDMI OUT button

This sets the HDMI monitor output.

DIMMER button

Each press of this switches the brightness of the display.

STATUS button

Each press of this switches the status information that is

shown on the display.

WithThe Door Open (3 of 3)

HOME DISPLAY

Buttons and Display exposed when the door is

Open (3 of 3) 5

ZONE SELECT button

These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated

through the remote control unit.

ZONE2 ON/OFF button

This turns the power of ZONE2 on/off.

ZONE3 ON/OFF button

This turns the power of ZONE3 on/off.

Headphones jack (PHONES)

This is used to connect headphones.

When the headphones are plugged into this jack, audio will no longer

be output from the connected speakers or from the PRE OUT connectors.

NOTE: To prevent hearing loss, do not raise the volume level excessively

when using headphones.

SETUP MIC jack

This is used to connect the supplied Sound calibration

microphone.

USB port (T)

This is used to connect USB storages (such as USB

memory devices).

AUX1-HDMI connector

This is used to connect HDMI output compatible

devices such as video camcorders and game consoles.

AUX1 INPUT connectors

Used to connect analog output compatible devices

such as video camcorders and game consoles.

Main Display (1 of 2)

HOME MAIN DISPLAY (1 of 2)

Buttons and Display exposed when the door is

Open (3 of 3) 6

A Light illumination

When the power to this device is switched on, the

surrounding area is lit blue. The settings can be changed so

the light does not switch on.

Volume indicator

Input source indicator

The currently selected input source name is displayed.

If the input source name has been changed using “Source

Rename” in the menu, the input source name after the

change is displayed.

Standard display Tuner display

These light up according to the reception conditions

when the input source is set to “HD Radio”.

Lights up when the broadcast is properly tuned in.

In the FM mode, this lights up when receiving stereo

broadcasts.

Main display

The input source name, sound mode, setting values and other information are displayed here.

Main Display (2 of 2)

HOME SUB DISPLAYMAIN DISPLAY (2 of 2) 7

This lights when the sleep mode is selected.

ZONE2/ZONE3 power on displaySleep timer indicator

This lights up when ZONE2 (separate room) power

is turned on.

This lights up when ZONE3 (separate room) power

is turn

Sub Display

 Input signal indicators

The respective indicator will light corresponding to the input signal.

 Decoder indicators

These light when Dolby or DTS signals are input or when the Dolby or DTS

decoder is running.

 Audyssey®indicator

This lights when “MultEQ®XT32”, “Dynamic EQ”, “Dynamic Volume”,

“Audyssey DSX®” or “Audyssey LFCTM” is set.

 Tuner reception mode indicators

These light up according to the reception conditions when the input source is

set to “HD Radio”.

TUNED: Lights up when the broadcast is properly tuned in.

STEREO: Lights up when receiving FM stereo broadcasts.

 Monitor output indicator

These light according to the HDMI monitor output setting. When set to

“Auto(Dual)”, the indicators light according to connection status.

 MULTI ZONE indicator

This lights up when ZONE2 or ZONE3 (separate room) power is turned on.

 Sleep timer indicator

This lights when the sleep mode is selected.

MUTE indicator

This blinks while the sound is muted. link,

 Volume indicator

 Information display

The input source name, sound mode, setting values and

other information are displayed here.

 Front speaker indicator

This lights according to the setting of the front A and B

speakers.

 Input/output signal channel indicators

The channel for input/output signals is displayed according to

the setting configured for “Channel Indicators”.

•When “Channel Indicators” is set to “Output” (Default)

These light when audio signals are being output from the

speakers.

•When “Channel Indicators” is set to “Input” These light

corresponding to the channels that include the input

signals.

When playing HD Audio sources, the EXT indicator lights

when a signal from an extension channel (a channel other

than the front, center, surround, surround back, front height,

front wide or LFE channel) is input.

123456789

  

HOME REAR PANEL 1MAIN DISPLAY (2 of 2) 8

Rear Panel (1 of 3)

HOME

Bluetooth/wireless LAN antenna connectors

Used to connect the included external antennas for

Bluetooth/wireless connectivity when connecting to a

network via wireless LAN, or when connecting to a handheld

device via Bluetooth.

•Place the external antennas for Bluetooth/wireless

connectivity evenly over the screw terminal of rear.

•Turn clockwise until the antennas is fully connected.

•Rotate the antenna upwards for best reception.

REAR PANEL (2 of 3)SUB DISPLAY 9

DC OUT jacks

Used to connect devices equipped with the trigger function.

Digital audio connectors (DIGITAL AUDIO)

Used to connect devices equipped with digital audio connectors.

“Connection 2 : TV equipped with an HDMI connector and

incompatible with the ARC (Audio Return Channel)”

“Connection 3 : TV equipped without an HDMI connector”

“Connecting a set-top box (Satellite tuner/cable TV)”

“Connecting a DVD player or Blu-ray Disc player”

RS-232C connector

Used to connect home automation controller devices fitted with

RS-232C connectors. Consult the owner’s manual of the home

automation controller for more information about serial control of

this unit.

Perform the operation below beforehand.

1. Turn on the power of this unit.

2. Turn off the power of this unit from the external controller.

3. Check that the unit is in the standby mode.

HOME

Rear Panel (2 of 3)

REAR PANEL (3 of 3)REAR PANEL (1 of 3) 10

FLASHER IN jack

Used when using a control BOX or other such control devices

to control

this unit.

SIGNAL GND terminal

Used to connect a ground wire for the turntable.

network.

REMOTE CONTROL jacks

Used to connect infrared receivers/transmitters in order to

operate this unit and external devices from a different room.

Video connectors (VIDEO)

Used to connect devices equipped with video connectors.

“Connection 3 : TV equipped without an HDMI connector”.

“Connecting a set-top box (Satellite tuner/cable TV)”

“Connecting a DVD player or Blu-ray Disc player”.

HDMI connectors

Used to connect devices equipped with HDMI connectors.

“Connection 1 : TV equipped with an HDMI connector and

compatible with the ARC (Audio Return Channel)”.

“Connection 2 : TV equipped with an HDMI connector and

incompatible with the ARC (Audio Return Channel)”.

“Connecting a set-top box (Satellite tuner/cable TV)”

“Connecting a DVD player or Blu-ray Disc player”.

NETWORK connector

Used to connect to a LAN cable when connecting to a wired

LAN

AC inlet (AC IN)

Used to connect the power cord.

Andere Handbücher für SR7010

Inhaltsverzeichnis

Andere Marantz Empfänger Handbücher

Marantz

Marantz NR1604 Bedienungsanleitung

Marantz

Marantz SR7008 Bedienungsanleitung

Marantz

Marantz SR5002N1B Bedienungsanleitung

Marantz

Marantz Slim-line NR1501 Bedienungsanleitung

Marantz

Marantz 2226B Bedienungsanleitung

Marantz

Marantz SR4002 Referenzhandbuch

Marantz

Marantz SR7008 Benutzerhandbuch

Marantz

Marantz SR7008 Bedienungsanleitung

Marantz

Marantz 2252 Bedienungsanleitung

Marantz

Marantz SR5200 Bedienungsanleitung

Marantz

Marantz SR6008 Kurzanleitung

Marantz

Marantz NR1200 Bedienungsanleitung

Marantz

Marantz SR6006 Bedienungsanleitung

Marantz

Marantz SR6006 Bedienungsanleitung

Marantz

Marantz SR6006 Bedienungsanleitung

Marantz

Marantz SR390 Bedienungsanleitung

Marantz

Marantz SR7100DC Bedienungsanleitung

Marantz

Marantz SR5010 Bedienungsanleitung

Marantz

Marantz NR1605 Bedienungsanleitung

Marantz

Marantz SR6003 Bedienungsanleitung

Marantz

Marantz SR4300 Bedienungsanleitung

Marantz

Marantz SR-14 Bedienungsanleitung

Marantz

Marantz 2235B Bedienungsanleitung

Marantz

Marantz SR5013 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung