Mark MBAR 612 BAT WI Bedienungsanleitung

Rev. 151002

MBAR 612 BAT WI

User Manual/Manual de Uso

1.Summary

Summary

Product introduction

Packing List

MBAR 612 BAT WI 1 PC

DMX Signal Cable 1 Set

Input power cable 1 PC

User Manual

Thanks you for purchasing MBAR 612 BAT WI. Please, read these instructions carefully before begin

and operate the fixture according to these instructions to avoid possible damages and accidents

causing by misusage.

MBAR 612 BAT WI

It adopts high power 6-in-1 LED, which refers to single LED is made of R,G,B,A,W,UV 6-in-1 LED,

and long life span, low consumption, good color mixing effect and high brightness are the most

prominent features. Each kind of LED can be independently dimmed. The built-in programs include

dimming stroble, gradual change and fading. It uses power switch, performs low weight and

consumption, stable capability and long life. Standard DMX 512 signal is requested.

uses casting aluminum housing, designed in a fashion form.

MBAR 612 BAT WI - 1 - User Manual/Manual de Uso

2.Safety Instructions

Safety Notes

Safety

Instruction

●

- Enquire the authorized technical people to repair the unit.

- Always make sure disconnect from the power source before setting up, serving and moving.

- Avoid direct eye exposure to the fixture when it is on.

Make sure the power supply voltage are consistent with this device. Ensure the use of voltage is in

the range of the technical parameters requested.

Before the installation, please, check if the device is in good conditions and appears no damage.

This device is designed for indoor

The fixture maybe mounted in any position provided there is adequate room for ventilation. Make sure

there are no inflammable and explosive items in 0.5 meter around.

Yellow/green cable cabling earthling safety, do not remove it

MBAR 612 BAT WI - 2 - User Manual/Manual de Uso

Main Function

- Input Voltage : AC 100-264V /47-63 Hz

- Consumption: 80W

- Lamp type: 12W LEDs 6-in-1 R,G,B, A, W, UV (6 pcs)

- PMW dimmer: 1500 Hz (16666 grades)

- Control signal: DMX 512

- Control mode: stand alone/master/slave

- Channels: 12, 9, 7, 6, 5, 4 CH

- Function effect: dimmer, strobe, gradual change

- Touch buttons, automatic lock key

MBAR 612 BAT WI - 3 - User Manual/Manual de Uso

3. Dimensions

MBAR 612 BAT WI - 4 - User Manual/Manual de Uso

- Built-in temperature control measurement function. when LED work overheated, the system reduces

LED output power.

- Cooling mode: Natural convection

- Built-in lithium battery, compatible with wireless DMX

- Charging time: 4 hours

- Full light duration: 3 hours

- Dimensions: 645 x 85,4 x 135,7 mm

- Net weight: 4.2 kg

- Beam angle: 25º

DMX Control Function

DMX

Channels

4CH

5CH

6CH

7CH

9CH

12CH

VALUE

FUNCTION

CH1

0-255

Dimming all

CH1

CH2

0-255

Red

CH2

CH3

0-255

Green

CH3

CH4

0-255

Blue

- CH2 CH4 CH5 CH5 CH5 0-255 Amber

CH4 CH3 CH5 CH6 CH6 CH6 0-255 White

- CH4 CH6 CH7 CH7 CH7 0-255 UV

- - - - CH8 CH8 0-5 No strobe

MBAR 612 BAT WI - 5 - User Manual/Manual de Uso

6-20 Random burst strobe(slow to fast)

21-60 Normal strobe(slow to fast)

61-100 Electronic Sinewave(slow to fast)

101-140 Random Strobe(slow to fast)

141-180 Opening pulse(slow to fast)

181-220 Closing pulse(slow to fast)

221-255

Electronic Squarewave(slow to fast)

- - -

CH9(CH9

prior to

CH11)

0-10

No effect

11-15

CT01

16-20

CT02

21-25

CT03

26-30

CT04

31-35

CT05

36-40

CT06

41-45

CT07

46-50

CT08

51-55

CT09

56-60

CT10

61-65

AUTO 1

(R,G,B,A,W,UV,RG,RB,GB,AW,WUV,AUV)

66-70 AUTO 2 (R↑,R↓,G↑,G↓,B↑,B↓,A↑,A

↓,W↑,W↓,UV↑,UV↓)

71-75

AUTO 3 (R↑G↑,R↓G↓,R↑B↑,R↓B↓,B

↑G↑,B↓G↓)

76-80

AUTO 4 (R↑G↑B↑W↑,R↓G↓B↓W↓)

81-85

AUTO 5 (Rainbow effect: B,BG↑,BG,B↓

G,G,GR↑,GR,G↓R,R,RB↑,RB,R↓B)

86-90

CHASE 1

91-95

CHASE 2

96-100

CHASE 3

101-105

SOUND 1:Sound change color

106-110

SOUND 2:Sound Strobe(white color only)

111-200

R:111-115,G:116-120,B:121-125,A:126-130,W:1

31-135,UV:136-

140,YELLOW:141-

145,PINK:14

6-150,CYAN:151-

155,ORANGE:156-

160,VIOL

ET:161-165,GOLDEN:166-170,2700K:171-175,

3200K:176-180,4000K:181-185,5500K:186-190,

6500K:191-195,RGBW:196-200

201-255 Reserved

- - - - - CH10 0-255 0-255(S),(speed of AUTO,fast to slow when

AUTO1-AUTO5 effective）

- CH5 - - - CH11

(RGB

0-10 No effect

11 Blue (Blue=full, Red+Green=0)(step)

6.Display Operation instruction

MENU : access the menu or return to a previous menu option

ENTER: select the current menu option

UP: menu selection or parameter increments

DOWN: menu selection or parameters decrease

MBAR 612 BAT WI - 6 - User Manual/Manual de Uso

color

mixing

instead of

RGB

channels)

12-50 Red=0, Green->up,Blue =full(proportional)

51 Light Blue (Red=0, Green=full, Blue =full)(step)

52-90 Red=0, Green=full, Blue ->down(proportional)

91 Green (Red=0, Green=full, Blue =0)(step)

92-130

Red->up, Green=full, Blue=0(proportional)

131

Yellow (Red=full, Green=full, Blue=0)(step)

132-170

Red=full, Green->down, Blue=0(proportional)

171

Red(Red=full, Green=0, Blue=0(step)

172-210

Red=full, Green=0, Blue ->up(proportional)

211

Magenta (Red=full, Green=0, Blue=full)(step)

212-250

Red -> down, Green=0, Blue=full(proportional)

251-255

Blue (Red=0, Green=0, Blue=full)(step)

- - -

CH9

CH12

0-10

Use the dimmer mode which menu had set up

11-20

Linear curve

21-30

Square law curve

31-40

Inverse square law curve

41-50

S-curve

51-60

Linear curve and smooth

61-70

Square law curve and smooth

71-80

Inverse square law curve and smooth

81-90

S-curve and smooth

91-255 Use the dimmer mode which menu had set up

MBAR 612 BAT WI - 7 - User Manual/Manual de Uso

Menu Tree

Tab Level 1 Level 2 Level 3 Level 4

ADDR(Address) 001-512

STAT(Static

control) R 0-255*

G 0-255*

0-255*

SHUT

0-255*

PRSC(Preset

color)

NONE,R,G,B,A,W,UV,YELLOW

,PINK,CYAN,ORANGE,VIOLET

,GOLDEN,2700K,3200K,4000K,5

500K,6500K,RGBW *

SET(Set) CAL(Calibration)

R(Red)

0-255

G(Green)

0-255

B(Blue)

0-255

USE

YES/NO

CHMD(Channel

mode)

12CH

9CH

7CH

6CH

5CH

4CH

DIM(Dimming

mode)

LIN(linear)/SQR(square

law)/ISQR(inverse square

law)/SCUR(Scurve)/LIN.(linear

smooth)/ SQR.(square law

smooth)/ISQR.(inverse square law

smooth)/SCUR.(S-curve smooth)

DISY(Display

set) ON(Permanent on)

2MIN (2 minutes off)

LOCK(Key 2

minutes lock) YES/NO

BAT(battery

output) HIGH(high)

MBAR 612 BAT WI - 8 - User Manual/Manual de Uso

MID

LOW

SIGN(DMX

signal selection) 2.4G(wirelsee)/CABL(Cable)

WIRE(Wireless

set) REST(reset) YES/NO

KEY

CTST(Custom

color set) CT01

R(Red)

0-255

G(Green)

0-255

B(Blue)

0-255

CT10

AUTO(Auto) AT01

0-255*

AT02

0-255*

AT03

0-255*

AT04

0-255*

AT05

0-255*

CHS1

RUN..*

CHS2

RUN..*

CHS3

RUN..*

SOU1

RUN..*(Sound change color)

SOU2

RUN..* (Sound Strobe,white color

only)

PROG

（Program）CHS1（Chase 1）

SC01（Scene 1）

R(Red)

0-255

G(Green)

0-255

B(Blue)

0-255

SHUT

0-255

AUTO

NONE,AT01-AT

ATSP

0-255(S)

. . TIME 0-255(S)

. . WAIT 0-25.5(S)

. . USE YES/NO

. SC20（Scene 20）

CHS3(Chase 3)

INFO SOFT(Software Vx.x

Instructions

：

When enter to the “*” position displayed on the LED, the light will automatically set as master and send data to

external. Other fixtures can receive this data and will synchronously running without manually set as slave. When

power cycle it will jump to the “*” position and running again.

6.1 DMX ADDRESS SETTING

1) Press the 【ENTER】

button in 【ADDR】

menu, then enter to the DMX address setting.

2) Press the

【UP/DOWN】button to select【1-512】numerical value.

3) Press the

【ENTER】button to escape and save.

6.2 STATIC SETTING

1) Press the【ENTER】button in 【STAT】menu, then enter to the static setting.

2) Press the【UP/DOWN】

button to select 【RED】，【GREEN】，【BLUE】and【PRST】.

3) Press the【UP/DOWN】button to set up the

【0-255】numerical value.

4) Press the【ENTER】button to escape and save.

6.3 COLOR CAST CALIBRATION SETTING

1) Press the

【ENTER】button in 【CAL】menu, then enter to the color cast calibration setting.

2) Press the

【UP/DOWN】button to select 【RED】，【GREEN】，【BLUE】

3) Press the

【UP/DOWN】button to set up the【0-255】numerical value.

4) On the【USE】interface, pressing

【YES】button means valid,

【NO】means invalid.

5) Press the

【ENTER】button to escape and save.

MBAR 612 BAT WI - 9 - User Manual/Manual de Uso

（Information）version)

POW(Power

reduction)

100%/80%/50%

BAT

0-10

LOAD(Load) ST L（Setting

load)

YES/NO

PR L（Program

load)

YES/NO

SEND(Send) YES/NO

Inhaltsverzeichnis

Sprachen:

Andere Mark Scheinwerfer Handbücher

Mark

Mark BEAM SPOT Bedienungsanleitung

Mark

Mark Superparled Eco Bedienungsanleitung

Mark

Mark MAX 3 BT Bedienungsanleitung

Mark

Mark BIG FLASH II 1500 Bedienungsanleitung

Mark

Mark Asym Bedienungsanleitung

Mark

Mark MULTIPAR 162/3 Bedienungsanleitung

Mark

Mark SUPERBAT LED WI 712 Bedienungsanleitung

Mark

Mark MBAR 120 Bedienungsanleitung

Mark

Mark SUPERPARLED 336 S Bedienungsanleitung

Mark

Mark SPACE 108 Bedienungsanleitung

Mark

Mark LX 100 RGB Bedienungsanleitung

Mark

Mark LX 50G PRO Bedienungsanleitung

Mark

Mark MAM 120 TROLLEY Bedienungsanleitung

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung