marsden Smart Diet Scale Installationshandbuch
OPERATIONS MANUAL
Please take the time to read these
instructions before starting
to use the scales
Contents
1.0 Introduction
1.1 Safety 1
1.2 Overview 2
2.0 Operation 3
2.1 Installation 3
2.2 Smart Diet Scale Operation 3
2.2.1 Weighing Food 3
2.2.2 Weighing Food on Plates 5
2.3 Smart Diet Scale Application 6
2.3.1 Add/Edit/Switch Profiles 7
2.3.2 Add a Dish (Recipe) 7
2.3.3 Add a Food Item with Bar Code Scanner 8
2.3.4 Review/Edit a Meal 8
2.3.5 Divide a Meal with Others 8
2.3.6 Add a Photo of a Meal (Optional) 8
2.3.7 Log 8
2.4 Multiple Scales 8
3.0 Appendix 9
3.1 Specifications 9
3.2 Federal Communications Commission (FCC) Statement 9
1.0 Introduction
The Smart Diet Scale is a Bluetooth enabled food scale that calculates the nutritional
value of an entire meal. Simply use the four quadrants to weigh separate components
of your meal or your entire meal at once. Use the Smart Diet Scale app to access
nutritional information for thousands of foods, record your intake and track your goals.
Perfect for those on dietary restrictions due to medical issues, or for anyone looking
for a fast and convenient way to assess their daily food intake, the Smart Diet Scale
makes nutritional tracking simple.
1.1 Safety
Safety Symbol Definitions
Indicates an imminently hazardous situation that, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation that, if not avoided could result in serious
injury or death, and includes hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided my result in minor or
moderate injury.
Indicates information about procedures that, if not observed, could result in damage
to equipment or corruption to and loss of data
General Safety
Do not operate or work on this equipment unless you have read and understand
the instructions and warnings in this manual. Failure to follow the instructions or
heed the warnings could result in injury. Contact Marsden Weighing Machine
Group for any replacement manuals. Proper care is your responsibility.
Electric shock hazard
Do not put the scale in the dishwasher
Do not use the scale with hot pots or pans
Do not allow children or inexperienced persons to operate this unit
Do not jump on the scale
Do not use for purposes other than weighing food
Do not place fingers into slots or possible pinch points
Do not use this product if any of the components are cracked
Do not exceed the rated load limit of the unit
Do not make alterations or modifications to the unit
Do not remove or obscure warning labels.
Always consult with your physician prior to beginning a diet or exercise programme.
1.2 Overview
Figure 1-1. Smart Diet Scale Panel
Key
Description
Press to power on or off
Press Tare to zero the scale
Press Unit to change the weighing unit (oz/gram)
Press to turn Bluetooth on or off. When Bluetooth is
switched on, the Bluetooth signal will show on the left-hand
side of the screen, and the scale will connect with the
nearest device that has the Smart Diet Scale app installed.
Key
Description
Low Battery
Battery needs to be charged or replaced
USB Connection
When the Smart Diet Scale is powered via the USB cable, the
USB icon will be displayed constantly.
Bluetooth Connection
When Bluetooth is turned on, the Bluetooth icon will be
displayed constantly.
Data Transmission
Bluetooth data transmission
2.0 Operation
2.1 Installation
1. Unpack the Smart Diet Scale box and its contents:
Smart Diet Scale
Smart Diet Scale Plates (qty. 4)
USB Cable
Quick Start Guide
Note: For best results, power the Smart Diet Scale using four AA batteries or by connecting the scale
to a PC through the USB cable.
2. Remove the small cover from the bottom of the scale, insert four AA
batteries and replace the cover.
3. Download and install the ‘Smart Diet Scale’ application to a supported
Android or iOS device.
Note: The Smart Diet Scale application works with iOS 8th generation and above and Android devices
4.4 and above that support Bluetooth Low Energy
2.2 Smart Diet Scale Operation
1. Place the scale on a dry, level and solid surface. The area should be between
5°C - 35°C and 30% - 85% relative humidity.
2. Press the ‘Power’ key to turn the scale on. The display will show all segments
(888.8) for four seconds. See Figure 2-1.
3. When the display changes to 0g, the scale is ready for weighing. See Figure 2-
2.
Note: If 0g does not display on the screen, press Tare to zero the scale. Tare can be used at any time to zero
the scale. If an item is heavier than the scale capacity, the display will show Err. This means that the scale is
overloaded.
4. Ensure Bluetooth is switched on, on both the Smart Diet Scale and your
device. If Bluetooth is working correctly, scale and device will connect
automatically –four coloured squares will appear on the app screen. There is
no pairing required.
2.2.1 Weighing Food
The Smart Diet Scale has four separate quadrants, allowing the user to weigh up to
four food items, either one at a time or several items at once. Use the following
instructions to weigh a single item or multiple items.
Weighing a Single Item
1. Place a single item on the Smart Diet. The scale will automatically determine the
location of the food based on the quadrant it was placed in.
2. The weight will display on the scale’s display, in the appropriate area for the
corresponding with the quadrant the item was placed in.
3. Repeat steps 1 and 2 for additional food items. Wait until the display blinks
three times before adding another item to the scale.
If one item crosses two quadrants, the scale will judge which quadrant to show its weight. If
two items, places at separate times, cross the same region, the scale can also judge the weight
and location of each individual item, as long as the second item was places at least three
seconds after the first item (wait for the display to blink three times).
Note: To weigh items individually, they cannot be places on the scale at the same time. One item must be
places on the scale and weighed, and then the second item can be added. If both items are places on the scale
at the same time, they will be judged as multiple items and their combined weight will show, see “Weighing
Multiple Items” below.
Weighing Multiple Items
To get a combined total weight of multiple items, all items must be placed on the scale
at the same time. The scale will display the total weight of all items. If individual weights
of the items are desired, be sure to place the items separately on the scale. See
“Weighing a Single Item” above.
2.2.2 Weighing Food on Plates
If desired, food can be weighed on the included Smart Diet Scale plates or on your
own plate.
Note: It is also OK to weigh food directly on the scale as shown in Section 2.2.1 depending on personal
preference.
2.2.3 Smart Diet Scale Plates
Use the following steps to weigh food items using the Smart Diet Scale Plates.
1. Place one or more of the Smart Diet Scale Plates on the scale.
2. Wait three seconds for the weight to display.
3. Press the Tare button to subtract the weight of the plate(s) from the scale. The
scale should read 0.0 on the display for the same quadrant that the plate is
sitting in.
4. Add a food item to one of the plates on the scale. The display will show only
the weight of the food item, as the weight of the plate has been subtracted
from the scale.
5. After the weight of the food item is calculated, repeat step 4 for the one of the
plates on the scale.
Other Food Containers
You can use any plate, bowl or cup with the Smart Diet Scale. Use the following steps
to weigh food items using food containers.
1. Place the food container at the centre of the scale and wait three seconds for
the weight to display.
2. Press the Tare button to subtract the weight of the container from the scale.
The scale should read 0.0 on the display.
3. To weigh food separately, place a food item on the container in the approximate
area of one of the scale quadrants.
4. Wait three seconds for the weight to display.
5. Add another food item on the container in the approximate area of a different
scale quadrant.
6. Repeat steps until all the food items have been added to the container.
Note: Alternatively, add all of the food items to the container at once and receive one weight reading
for the dish.
2.3 Smart Diet Scale App
The Smart Diet Scale pairs with the Smart Diet Scale App to calculate and record calorie intake.
Note: Unless otherwise stated, all instructions apply to both iOS and Android devices. If the instructions
differ between devices, the instructions for the iOS device will be included in the text and the instructions
for the Android device will be denoted by an asterisk (*).
Inhaltsverzeichnis
Andere marsden Skala Handbücher
marsden
marsden M-615 Bedienungsanleitung
marsden
marsden M-M-955 Bedienungsanleitung
marsden
marsden M-550BT Bedienungsanleitung
marsden
marsden MS2300 Bedienungsanleitung
marsden
marsden BFA-220P Bedienungsanleitung
marsden
marsden M-610 Bedienungsanleitung
marsden
marsden M-700 Bedienungsanleitung
marsden
marsden I-400SS Bedienungsanleitung
marsden
marsden C-100 Bedienungsanleitung
marsden
marsden M-640 Bedienungsanleitung
marsden
marsden MPPS-250 Bedienungsanleitung
marsden
marsden M-900 Bedienungsanleitung
marsden
marsden M-925 Bedienungsanleitung
marsden
marsden V-22 Bedienungsanleitung
marsden
marsden MBF-6000 Bedienungsanleitung
marsden
marsden M-620 Bedienungsanleitung
marsden
marsden B-300 Bedienungsanleitung
marsden
marsden MS-150 Bedienungsanleitung
marsden
marsden V-24 Bedienungsanleitung
marsden
marsden BFA-220R Bedienungsanleitung
