Marshall Amplification DSL20CR Bedienungsanleitung

DSL20CR &

DSL20HR

OWNER’S MANUAL

Congratulations on your purchase of this Dual Super Lead (DSL) amplier from

Marshall Amplication.

The DSL provides the legendary Marshall tone, allowing you to express your distinct

playing style and attitude.

From clean to distorted overdrives, the DSL 20 is a versatile all valve amp that allows

you to easily dial in the sound you desire.

This DSL amplier not only delivers the tone you expect from a Super Lead amplier

it is also packed with an array of features such as an effects loop, power reduction

and studio quality digital reverb. Right out of the box your DSL provides you with

the functionality you need to take your sound from rehearsal to the studio with

condence.

Your DSL amplier has been designed specically for those who need the full rich

tone of a valve amp in a compact and portable format. This makes the amp ideal for

a live environment, studio or at home thanks to the power reduction system.

We hope you enjoy performing, practicing and recording with your DSL amplier.

- The Marshall Team

The DSL 20 Head and DSL 20 Combo feature the same functions. The combo is

equipped with a 12” Celestion Seventy-80 speaker chosen for its ability to deliver

exceptional tone and exibility.

The DSL features two foot switchable channels: CLASSIC GAIN and ULTRA GAIN.

The CLASSIC GAIN channel can deliver sparkling clean sounds through to the more

aggressive break-up of a Marshall JCM800 amplier. The ULTRA GAIN channel

provides even more distortion and break-up for players looking for high gain tone

from their amplier.

Both channels share a passive three-band EQ, with BASS, MIDDLE and TREBLE

controls. The EQ section also features Tone Shift, which when activated recongures

the pre-amp mid frequencies making DSL ideal for contemporary metal tones,

especially when combined with higher gain settings.

The DSL 20 features professional quality digital REVERB and a series FX LOOP. The

LOW POWER function adds a further dimension to the DSL sound, giving you rich

valve tone at an ear-friendly volume.

INTRODUCTION

OVERVIEW

ENGLISH

PLEASE READ THIS MANUAL CAREFULLY

BEFORE PLUGGING IN.

FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.

KEEP THESE INSTRUCTIONS.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modications not expressly approved by the party

responsible for compliance could void the users authority to operate the equipment.

This device complies with CAN ICES-3(B)/NMB-3(B)

COMPLIANCE STATEMENT

WARNING:

Before going any further, make sure that

your amplier is compatible with your

mains electricity supply. If you have any

doubt, please seek help from a qualied

technician – your Marshall dealer can

help you in this respect.

MAINS INPUT & FUSE:

The specic mains input voltage

rating that your amplier has been

manufactured for is indicated on the

rear panel of the amplier. Your amplier

is provided with a detachable mains

(power) lead, which should be connected

to the MAINS INPUT socket on the rear

panel of the amplier (Rear Panel Function

#16). The correct value and type of

mains fuse is specied on the rear panel

of the amplier.

NEVER attempt to bypass the fuse or t

one of the incorrect value or type.

TRANSPORTING YOUR EQUIPMENT:

Please ensure that your amplier is

switched off, unplugged from the mains

electricity supply and all removable

cables have been disconnected from

your equipment before attempting to

move it.

IMPORTANT SET UP INFORMATION:

1. When using the DSL20HR, or the

DSL20CR with an extension speaker

cabinet(s), make sure that the

speaker cabinet(s) is connected to

the correct impedance loudspeaker

jack socket(s) on the rear panel of the

amplier. See the LOUDSPEAKERS

guide in this manual for specic

information regarding impedance

matching (Rear Panel Function #22).

WARNING:

Failure to do the above may damage

your amplier. When connecting a

speaker cabinet make sure that you

use a proper speaker cable. Never use a

screened (shielded) guitar cable for this

purpose.

2. Ensure that the POWER switch is

set to the OFF position (Front Panel

Function #15).

3. Ensure the OUTPUT switch is in the

STANDBY position

(Front Panel Function #14).

4. Connect the supplied mains (power)

lead into the MAINS INPUT (Rear

Panel Function #16) rst and then

into an electricity outlet.

5. Ensure that the volume controls on

the front panel are set to zero (Front

Panel Functions #3 & #6).

6. Plug your guitar into the INPUT jack

socket (Front Panel Function #1).

7. Switch the amplier ON using the

POWER switch, wait for a few

minutes and then switch the

OUTPUT switch to either the LOW

or HIGH position.

8. Turn the front panel POWER switch

on and wait for a few minutes

before going to point 9.

9. Turn the selected channel volume

up to your preferred level and your

amplier is ready to play.

WARNING! IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

PLEASE READ THIS MANUAL CAREFULLY

BEFORE PLUGGING IN.

FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.

KEEP THESE INSTRUCTIONS.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modications not expressly approved by the party

responsible for compliance could void the users authority to operate the equipment.

This device complies with CAN ICES-3(B)/NMB-3(B)

COMPLIANCE STATEMENT

WARNING:

Before going any further, make sure that

your amplier is compatible with your

mains electricity supply. If you have any

doubt, please seek help from a qualied

technician – your Marshall dealer can

help you in this respect.

MAINS INPUT & FUSE:

The specic mains input voltage

rating that your amplier has been

manufactured for is indicated on the

rear panel of the amplier. Your amplier

is provided with a detachable mains

(power) lead, which should be connected

to the MAINS INPUT socket on the rear

panel of the amplier (Rear Panel Function

#16). The correct value and type of

mains fuse is specied on the rear panel

of the amplier.

NEVER attempt to bypass the fuse or t

one of the incorrect value or type.

TRANSPORTING YOUR EQUIPMENT:

Please ensure that your amplier is

switched off, unplugged from the mains

electricity supply and all removable

cables have been disconnected from

your equipment before attempting to

move it.

IMPORTANT SET UP INFORMATION:

1. When using the DSL20HR, or the

DSL20CR with an extension speaker

cabinet(s), make sure that the

speaker cabinet(s) is connected to

the correct impedance loudspeaker

jack socket(s) on the rear panel of the

amplier. See the LOUDSPEAKERS

guide in this manual for specic

information regarding impedance

matching (Rear Panel Function #22).

WARNING:

Failure to do the above may damage

your amplier. When connecting a

speaker cabinet make sure that you

use a proper speaker cable. Never use a

screened (shielded) guitar cable for this

purpose.

2. Ensure that the POWER switch is

set to the OFF position (Front Panel

Function #15).

3. Ensure the OUTPUT switch is in the

STANDBY position

(Front Panel Function #14).

4. Connect the supplied mains (power)

lead into the MAINS INPUT (Rear

Panel Function #16) rst and then

into an electricity outlet.

5. Ensure that the volume controls on

the front panel are set to zero (Front

Panel Functions #3 & #6).

6. Plug your guitar into the INPUT jack

socket (Front Panel Function #1).

7. Switch the amplier ON using the

POWER switch, wait for a few

minutes and then switch the

OUTPUT switch to either the LOW

or HIGH position.

8. Turn the front panel POWER switch

on and wait for a few minutes

before going to point 9.

9. Turn the selected channel volume

up to your preferred level and your

amplier is ready to play.

WARNING! IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

FRONT PANEL FUNCTIONS

6. VOLUME

Controls the volume level of the ULTRA

GAIN channel.

EQUALISATION SECTION

7. TONE SHIFT

Recongures the preamp EQ network’s

mid frequencies adding a new dimension

to tonal shaping.

8. TREBLE

Controls higher frequencies of your

sound. Turning clockwise will increase

the highs making your sound brighter

and more crisp.

9. MIDDLE

Controls the middle register of your

sound. Turning clockwise adds girth.

Turning anticlockwise reduces the

middle frequencies ‘scooping’ the

sound – this is accentuated when used in

conjunction with Tone Shift (Front Panel

Function #7).

10. BASS

Controls the amount of lower frequency,

or bottom-end, in your sound. Turning

clockwise will increase the bottom-end

making the sound fuller.

Tonal Note: The preamp EQ network is

dynamic and highly interactive. Please note

that because of this, altering the setting of

one control can change the way that the

other controls behave – experiment to nd

your sound.

1234567

1. INPUT

Input jack socket for your guitar cable.

Use a good quality screened/shielded

guitar cable to help prevent noise

interference.

CLASSIC GAIN CHANNEL

2. GAIN

Controls the gain level for the CLASSIC

GAIN channel. As the amount of gain

increases, so will the distortion level in

your sound.

3. VOLUME

Controls the volume level for the

CLASSIC GAIN channel.

4. CHANNEL SELECT

Press to switch between CLASSIC GAIN

and ULTRA GAIN channels.

The CLASSIC GAIN channel status LED

will light green to indicate that CLASSIC

GAIN channel is selected.

The ULTRA GAIN channel status LED

will light red to indicate the ULTRA GAIN

channel is selected.

Note: Channels can be selected using the

supplied 2-way footswitch.

ULTRA GAIN CHANNEL

5. GAIN

Controls the gain level for the ULTRA

GAIN channel. As the amount of gain

increases, so will the distortion level in

your sound.

DSL20C FRONT PANEL

DSL20H FRONT PANEL

9101112131415

9 10 11 12 13 14 151 2 3 4 5 6 7 8

ENGLISH ENGLISH

FRONT PANEL FUNCTIONS NOTES

11. PRESENCE

Controls the amount of higher frequency

content in your sound. Turn clockwise

to add bite for a more cutting tone.

PRESENCE is an power-stage function

and acts independently of the preamp

EQ network.

12. RESONANCE

Controls the amount of lower frequency

content in your sound. Turning this

control clockwise adds a resonant

bass boost, increasing bottom end.

RESONANCE is a power-stage function

and acts independently of the preamp

EQ network.

13. REVERB

Controls the overall REVERB level.

14. OUTPUT

This three position rocker switch

combines STB (standby) and HIGH/

LOW output power functions. The

output stage and power control for this

amplier has been designed to deliver

the optimum tonal performance at

all power levels. The HIGH and LOW

output functions allow the user to

choose between two congurations of

the internal power supply. These two

congurations give the choice between

two output power levels, but ensure that

the output valves behave in the same

way for both. This means the amplier

can be put into LOW power mode

without compromising on tone.

HIGH: This is the 20 Watt high power

setting.

STB (standby): This is used in conjunction

with the mains POWER switch (Front Panel

Function #15). When powering up, always

switch mains POWER on rst, leaving

the OUTPUT switch in the STB (standby)

position. Standby mode should also be

used to mute the amp during breaks in

performances to avoid stress to the valves

of the amplier.

LOW: This is the 10 Watt low power setting.

15. POWER

Mains power switch.

ENGLISH ENGLISH

emulation. This ensures that your

headphone and output signal from this

socket provide the best possible tone for

practice or recording.

Note: For silent recording via EMULATED

OUT set the OUTPUT switch to STB (Front

Panel Function #14).

Important: Using EMULATED OUT does

not omit the need for a speaker load to be

connected (See Rear Panel Function #22).

22. LOUDSPEAKERS

There are three speaker cabinet output

jack sockets available. They are labelled

according to the intended impedances:

• 1 x 16 OHM: Connect a single 16

Ohm speaker cabinet to this jack.

• 1 x 8 OHM or 2 x 16 OHM: Connect

a single 8 Ohm speaker cabinet or

two 16 Ohm speaker cabinets.

WARNING - Although the amplier has

three speaker outputs, never attempt

to connect more speaker cabinets than

rated. The safe combinations are: 1 x 8

Ohm speaker cabinet, 2 x16 Ohm speaker

cabinets or 1 x 16 Ohm speaker cabinet.

Any other speaker cabinet conguration

may stress the power amplier section and

in extreme cases may lead to valve and/

or output transformer failure. NEVER use

DSL20HR or DSL20CR without a speaker

load.

16. MAINS INPUT

Connects the amplier to the mains

electricity supply.

Note: The MAINS INPUT socket has an

integrated fuse compartment. Ensure that

the value of a replacement fuse matches the

labelling on the amplier rear panel. You

MUST ALWAYS switch the amplier OFF

and disconnect it from the mains electricity

supply before attempting to access the fuse

compartment. If in doubt, contact your

Marshall dealer.

17. FX LOOP RETURN

Connect the output of an external FX

pedal or processor.

18. FX LOOP SEND

Connect the input of an external FX

pedal or processor.

19. F/S

Connect the supplied 2-way CHANNEL

and FX LOOP footswitch here (PEDL-

90012).

20. AUDIO IN

Connect an external device here for

practice or to jam along with music.

21. EMULATED OUT

Frequency compensated line level

output for headphones or for connection

to a mixer. The DSL is equipped with

a high quality emulated output using

Softube-designed studio cabinet

REAR PANEL FUNCTIONS

DSL20CR REAR PANEL

DSL20HR REAR PANEL

ENGLISH

16 17 18 19 20 21 22

171819202122

Andere Handbücher für DSL20CR

Inhaltsverzeichnis

Andere Marshall Amplification Verstärker Handbücher

Marshall Amplification

Marshall Amplification JCM800 Bedienungsanleitung

Marshall Amplification

Marshall Amplification ORIGIN 20 Bedienungsanleitung

Marshall Amplification

Marshall Amplification JCM 800 Bedienungsanleitung

Marshall Amplification

Marshall Amplification VALVETEST AVT150HX Bedienungsanleitung

Marshall Amplification

Marshall Amplification MGP 9001 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AFD100 Slash Signature Series Bedienungsanleitung

Marshall Amplification

Marshall Amplification V-R44P Bedienungsanleitung

Marshall Amplification

Marshall Amplification VALVESTATE 8008 Bedienungsanleitung

Marshall Amplification

Marshall Amplification Haze MHZ40C Bedienungsanleitung

Marshall Amplification

Marshall Amplification STUDIO CLASSIC SC20H Bedienungsanleitung

Marshall Amplification

Marshall Amplification JMP-1H Bedienungsanleitung

Marshall Amplification

Marshall Amplification MB150 Bedienungsanleitung

Marshall Amplification

Marshall Amplification Jubillee Bass 3530 Bedienungsanleitung

Marshall Amplification

Marshall Amplification EL84 20/20 Bedienungsanleitung

Marshall Amplification

Marshall Amplification ORIGIN 20 Bedienungsanleitung

Marshall Amplification

Marshall Amplification MB450H Bedienungsanleitung

Marshall Amplification

Marshall Amplification MINI JUBILEE 2525H Bedienungsanleitung

Marshall Amplification

Marshall Amplification JCM800 Bedienungsanleitung

Marshall Amplification

Marshall Amplification Acoustic Soloist AS50D Bedienungsanleitung

Marshall Amplification

Marshall Amplification DSL100HR Bedienungsanleitung

Marshall Amplification

Marshall Amplification JVM410C Bedienungsanleitung

Marshall Amplification

Marshall Amplification CODE25 Bedienungsanleitung

Marshall Amplification

Marshall Amplification AMPLIFIER LIMITED EDITION JTM45 100 DUAL OUTPUT 100W SUPER LEAD... Bedienungsanleitung

Marshall Amplification

Marshall Amplification CODE Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung